Tender For Patch Repair And Improvement Of Part Of A.N.P.C Road ( From Barabazar More To Rabindra Sardha Satabarsa Mancha) By Bituminous Work In Ward No.-01 & 02
Tender Value
18.97 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
13 days left
EMD
37958
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Patch Repair And Improvement Of Part Of A.N.P.C Road ( From Barabazar More To Rabindra Sardha Satabarsa Mancha) By Bituminous Work In Ward No.-01 & 02
BOQ
| Sl. No. | Item Description |
| 1 | Filling Pot-holes and Patch Repair with Bituminous Concrete 40 mm . Removal of all failed material,in the pavement courses and if necessary below the pavement,until the root causes of the failure is removed, the trimming of completed excavationto provide firm vertical faces; specified for the pavement layer; application of tack coat conforming to cl. 503 of MORT&H'sspecification ,on to the sides and base of excavation prior to back filling the pot holes with hot bituminous material as per clause504 and the compaction,trimming and finishing of the surfaces of all patches to form a smoothcontinuous surface, level with the surrounding road as per the requirement of clause 3004.2 ofMORT&H's specn. (i) For Grading 1 Materials |
| 2 | Tack Coat . Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). i) On Bituminous surface @ 0.20-0.30Kg / sqm. |
| 3 | Bituminous Macadam . Providing and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed withapproved bituminous binder @ 3.3% (min) for Grading -1 and 3.4% (min) for Grading -2 by weight of total mix , transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Ref. toMORT&H's specification clause 504). For Grading II ( 19 mm nominal maximum aggregate size) Layer Thickness 50 - 75 mm. |
| 4 | Open-Graded Premix Surface . Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line......... finished to required level and grades (Reference to MORT&H's specification clause 510). Case - I: Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes / hour . |
| 5 | Seal Coat . Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats (Reference to MORT&H's specification clause 511) Case - I : Type A (Stone chips 6.7mm size) Providing and laying of liquid seal coat with HMP using approved crushed stone chippingand viscosity grade paving bitumen of suitable approved grade. |
| 6 | Sub Total |
| 7 | GST 18% |
| 8 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender