Tender For Civil Maintenance Works In Bolpur It Park
Tender Value
5.69 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
4 days left
EMD
11400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Birbhum → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil Maintenance Works In Bolpur It Park
BOQ
| Sl. No. | Item Description |
| 1 | Labour charge for fabrication and installation of structural Glazing/Curtain Wall made from annodized extruded allooy aluminium sections for the following units:-Structural Glazing made of extruded and annodized alloy aluminium sections, fabrications including cutting to proper shape and size, drilling including cost of brackets, fastener bolt, mullion bolt, nuts & washers, maskin tape, double side adhesieve crosslink foam (used for guard of glazed silicon on sub-frame), tissue paper foam (used as filler between sub-frame and under backing of weather silicon), screws and other necessary hardwares, fixing of glass as per drawing, specification and direction of Engineer-in-Charge. (The rate includes hire charges of all tools and plants, including all incidental charges, adhesieve, joiners such as screw,cleate angle,etc. but excluded the cost of extruded aluminium sections, glass, glazed silicon, weather silicon etc.) |
| 2 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;coloured, toughened glass conforming to IS: 2553-1992 (part-II), (i) 6mm thick |
| 3 | Supplying Glazing Silicon of approved make and brand for fixing of Glass on Sub-frame as per direction of Engineer-in-charge forStructural Glazing/Curtain wall etc.Glazing Silicon for fixing Glass on Sub frame |
| 4 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose.The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessarydeduction for scaffolding in the existing item to be done.Note:- (1) The elevational area of the scaffolding shall be measured forpayment purpose. (2) The payment will be made once only for executionof all items for such works. |
| 5 | Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White), 16 inch |
| 6 | Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface :With other than hi-gloss of approved qualityTwo coats (with any shade except white) |
| 7 | Painting with ready mixed red lead paint of approved make and brand : 2 coats |
| 8 | Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.Heavy type (I.S.I. size 3) |
| 9 | Labour for taking out rolling shutter (only shutter portion) dismantling by parts for repair or (replacement of damaged parts only), rehanging and refitting the same in position after necessary repairs (excluding the cost of supply of new parts). |
| 10 | Oiling and greasing of rolling shutter and repair to inside lock. |
| 11 | Renewing spring of rolling shutter as per existing size and shape including fitting fixing complete. |
| 12 | Supply & applying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-incharge.for Structural Glazing/Curtain wall complete in all respect with labour, material, hanging arrangement etc Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work |
| 13 | Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipeshaft with brackets, side guides and arrangements for inside and outsidelocking with push and pull operation complete, including the cost ofproviding and fixing necessary 27.5 cm long wire springs manufacturedfrom high tensile steel wire of adequate strength conforming to IS: 4454 -part 1 and M.S. top cover of required thickness for rolling shutters complete in all respect.80x1.20 mm M.S. laths with 1.20 mm thick top cover |
| 14 | Taking out Mirzapur or glazed porcelain or vitrified/ ceramic tiles carefully by chiselling from walls or floor including stacking serviceable material as directed. |
| 15 | Labour for setting tiles in floor/ wall in cement mortar (1 : 4) joints finished with white cement. |
| 16 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.2nd floorlight colour (Johnson/ Kajaria/ Somany) |
| 17 | A) Floor, With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.Area of each tile upto 0.09 Sq.mOther than Coloured decorative including white |
| 18 | (B) Wall, With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.b) Area of each tile above 0.09 Sq.mColoured decorative |
| 19 | A) Stitching crack in brick wall by carefully cutting out face brick 125 mm. deep into the wall, cleaning the gap and filling up the same with precast cement concrete block carefully set in cement mortar (1:3) including mending good damages and finishing the surface to match with adjacent areas complete as per direction.(i) With plain cement concrete blocks(1:1½:3) with stone chips.(a) Block size 250 x 125 x 75 mm.(Cement-1.85 Kg/No.) |
| 20 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.Two Coats |
| 21 | Ground floor |
| 22 | 1st floor |
| 23 | 2nd floor |
| 24 | 3rd floor |
| 25 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.(Two Coat), Normal Acrylic Emulsion |
| 26 | Ground floor |
| 27 | 1st floor |
| 28 | 2nd floor |
| 29 | 3rd floor |
| 30 | Godrej Hydraulic door closer fitted and fixed complete. Heavy type |
| 31 | Dressed wood work in post , plate , battens . etc. fitted & fixed complete(excluding the cost of bolts only, but including the cost of nails, screws etc.)(The quantum should be corrected upto three decimals), Sal : Local. Ground floor |
| 32 | Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin of approved make andbrand fitted and fixed as per design as per approval and direction of Engineer-in-Charge.[excluding the cost of supporting frame work and teak woodbatten/Lipping]In Ground Floor, 12 mm |
| 33 | Supplying, fitting and fixing boiling water proof block board conforming toIS:1659-1990 conforming to IS:848-1974 of approved make and brand, fitted andfixed as per design as per direction of Engineer-in-charge. [Excluding the cost ofsupporting frame work and teak wood batten/Lipping].In Ground Floor, 25 mm |
| 34 | Applying Acrylic Emulsion Paint of approved make and brand on wallsand ceiling including sand papering in intermediate coats including putty(to be done under specific instruction of Superintending Engineer) : (Two coats), Standard quality |
| 35 | Supply , fitting and fixing Bronze gate valve (Zoloto/ Leader), 80 mm dia |
| 36 | Labour for taking out door and window frame including shutter for repair orreplacement of different parts of the frame & refixing the same including mendinggood all damaes complete. Area uoto 2.5 sqm |
| 37 | Providing and fixing exterior quality Aluminium Composite Panel (ACP)wall cladding on existing Al. /MS frame work with GI brackets, ACP fixedon the existing frame work by folding the edges of ACP panel (Engravingthe rear surface of ACP sheet) with CP angles, cleats and strainless Steelscrews forming groves at the periphery of ACP panel. Such grooves filledwith foam and silicon sealant etc. complete with all materials (butincluding the cost of silicon sealant), labour, scaffolding and all otherincidental charges complete in all respect as per specification anddirection of Engineer-in-charge. (Mode of payment is on finished surfacearea of ACP)(b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender