Tender For Construction Of Gate On The Entrance Road Of Industrial Sector 13 And 15 Gida Gorakhpur
Tender Value
52.65 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
7 days left
EMD
4.64 Lakhs
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gorakhpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Gate On The Entrance Road Of Industrial Sector 13 And 15 Gida Gorakhpur
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 m. & lead upto 30 m. Including filling watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth removal & disposal of surplus earth as directed by engineer in charge upto a distance of 30m from the foundation trenches. (Excluding Royality). SOR SNO- 251 |
| 2 | Sand filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 8 Kms from the site of work and including watering dressing etc. required for proper completion of work. |
| 3 | Cement concrete with 4 cm. (1½\\") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 6:3:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 4 | Provding and laying Cement concrete wearing Coarse M-30 Grade including Reinforcement as per Drawing and technical Specifcation Morth Clauses 13.05G |
| 5 | Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorised over lapping shall be measured. and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire, and including the cost of binding wire, moulds and all otehr materials, labour and T&P etc. required for proper completion of the work. |
| 6 | M-150 brick work in 1:4 cement and C/sand mortar 4 in foundation and plinth including supply of all materials, labour and Tools and Plants etc. required for proper completion of work. |
| 7 | M-150 brick work in 1:3 cement and C/sand mortar 3 in Super Statecher including supply of all materials, labour and Tools and Plants etc. required for proper completion of work. (307+315) |
| 8 | 15 mm cement plaster on plinth side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand |
| 9 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Course sand |
| 10 | Making drip coarse sand in sun shades or facia with 1:3 cement and fine sand mortar as per direction of Engineer-in charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 11 | Cost cement concrete with 2 cm gauge and Slmilar work Approved stone ballast Approved coarse sand and cement in proprtion of 4:2:1 in including supply of all materals labour and tools and plants etc. required for proper completon for the Work SI no 282 |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R. 13.80 |
| 13 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause . Morth Specification 4.10 |
| 14 | Providing and laying of rubber moulded Interlocking M-40 cement concrete 100 mm tiles including compacted bed of fine sand compacting and proper embedd ing/ laying of In terlocking tiles levelling and dressing of surface to required level and slope, filling Joints with fine sand Including the cost of material, labour T&P etc.required for proper completion of the work Morth 6.30 1500gradation after blending to be as per specifications,cement content not to be lessthan 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not |
| 15 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :White sand stone - exposed face fine dressed |
| 16 | Providing & Fixing GIDA Logo writing word over sheet.As per approved by Engineer In Charge. M.R |
| 17 | Designing, fabricating, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:(ACP). DSR-, 2021/8.32 |
| 18 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufgrouting of joints to be made separately). Size of Tile 600x600 mm. D.S.R. 11.46.2 |
| 19 | Providingand fixingM.S. angle iron frames for doors,windows, ventilators and cupboardwithrectangular/L-Typesections,madeof1.60mmthickM.S.Sheet, jointsmitred,weldedandgrindedfinish,withprofilesof requiredsize, including fixingof necessarybut |
| 20 | Supply and fixing of flush Doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally |
| 21 | Fabrication and supply of M.S. grill as per approved design and drawing including the stair case railling etc. with square bars, m.s. angle iron, and m.s. flat iron as per direction of Engineer-incharge, supply of steel and its wastage, cutting, drilling holes and welding joints where necessary including each joint tube perfectaly welded and jointed and grinded to smooth finish. S.I.No 502(c) |
| 22 | Apply priming coat over new steel and other metal surface after and including preparing the surface throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes, fine steel/wood scrappers sand papering and knotting including cost of all materials, labour and T&P etc. required for proper completion of the work. S.I.No-1 Chapter 15 New Item |
| 23 | Painting first coat over priming coat (but excluding cost of priming cost) on wood or steel and other metal surface with superior synthetic enameland finish and inclucoat after first coat on wood or steel surface with paint of (iii) Superior quality.S.I.No-2+4(III) Chapter 15 New Item |
| 24 | Finising walls with water proof cement paint of approved make and on new work with 3 coat to give an even shade including supply of all materials labour and tools and plants etc. required for proper completon of the work. (S.I. No. 660 + 661) |
| 25 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 26 | Provding and laying Sign Board Gida |
| 27 | Supply of Electrcal Work As per Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender