Tender For Setting-Up Etp Across Accf Hospitals
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Sep 2026
20 days left
EMD
5 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Setting-Up Etp Across Accf Hospitals
BOQ
| Sl. No. | Item Description |
| 1 | Nursing College at Diphu ACCF Cancer Hospital Sr.No Description of Work Unit Qty MAKE |
| 2 | Effluent Treatment Plant Capacity = 5 KLD ( Packaged Type ) Supplying, installation, testing and commissioning of pre treatment plant for CSSD ,Blood bank , Laundry, Labs, OT wastewater of following capacity with the equipments listed below, including mechanical & electrical cost. The treatedwater should meet the required standards for discharging to the domestic sewage treatment plant. Anticipated effluent parameters before treatment: PH - 6.5 - 11 BOD5 - 300 mg/lt COD - 800 mg/lt. Oil & Grease - 7 mg/lt. DISCHARGE EFFLUENT CHARACTERSTICS AFTER PHYSICO-CHEMICAL TREATMENT pH - 6.5 – 8.5 BOD - Less than 100 Mg/L S. Solids - Less than 80 Mg/L COD - Less than 180 Mg/L Oil & Grease - Less than 5 Mg / L Odor - unobjectionable EFFLUENT TREATMENT SHALL INCLUDE THE FOLLOWING ITEMS Bar screen Chamber Oil & Grease chamber Equalization Tank Mixing Tank Reaction Tank Tube settler tank Clear water tank Overall ETP Daily Capacity KLD - 5 KLD Operationg Hours - 20 Maximum Normal Flow - 0.2 CuM / Hr. Peak Factor - 3 1.0 1.0 0.0 |
| 3 | Bar Screen Supply, Installation, Testing & Commissioning of Stainless Steel Perforated, Corrugated Bar Screen with suitable lifting arrangement - Domestic Effluent 1.0 1.0 Jindal /SAIL MOC- SS 304 SIZE- 600 x 800 MM Angle of Inclination- 60 Degree Bar spacing- 15 MM Size of Bars- 10-12 MM |
| 4 | Sump Pump transfer to ETP Providing and fixing Submersible pumps for the transfer of effluent from Sump tank to ETP Coolection tank with Cast Iron impeller and cast steel shaft with mechanical seal, with TEFC induction motor of class \\"F\\" insulation & efficiency class EFF-2, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply, 2900 RPM complete in all respects and as per specification with the following capacities: 1 Set 2.0 Grundfos/Kirloskar/Xylem 0.0 Pump Headers and other interconnecting to be Upvc Complete inlet, outlet and header piping of suitable dia (velocity shall not exceed 1.5m/s) -- 1 Lot Dual Plate NRV of appropriate dia and rating One set includes 2 nos. of pumps - 1 working + 1 standby Discharge : 1 m3/Hr Head : 10 m Solid Handling : 7-10 mm Motor Power: 0.75 kw Motor Efficiency : IE2 |
| 5 | Effluent Transfer Pump Providing and fixing Submersible pumps for the transfer of effluent from Equalization tank to mixing tank with Cast Iron impeller and cast steel shaft with mechanical seal, with TEFC induction motor of class \\"F\\" insulation & efficiency class EFF-2, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply, 2900 RPM complete in all respects and as per specification with the following capacities: 1 Set 2.0 Grundfos/Kirloskar/Xylem 0.0 Pump Headers and other interconnecting to be Upvc Complete inlet, outlet and header piping of suitable dia (velocity shall not exceed 1.5m/s) -- 1 Lot Dual Plate NRV of appropriate dia and rating One set includes 2 nos. of pumps - 1 working + 1 standby Discharge : 1 m3/Hr Head : 10 m Solid Handling : 7-10 mm Motor Power: 0.75 kw Motor Efficiency : IE2 |
| 6 | Sludge Transfer Pump Providing and fixing Non-Clogg centrifugal Sludge pumps for the transfer of sludge from tube settler with Cast Iron impeller and cast steel shaft with mechanical seal, with TEFC induction motor of class \\"F\\" insulation & efficiency class EFF-2, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply, 2900 RPM complete in all respects and as per specification with the following capacities: 1 Set 2.0 Grundfos/Kirloskar/Xylem 0.0 Pump Headers and other interconnecting to be Upvc Complete inlet, outlet and header piping of suitable dia (velocity shall not exceed 1.5m/s) -- 1 Lot Dual Plate NRV of appropriate dia and rating One set includes 2 nos. of pumps - 1 working + 1 standby Discharge : 1 m3/Hr Head : 10 m Solid Handling : 7-10 mm Motor Power: 0.75 kw Motor Efficiency : IE2 |
| 7 | Supply, installation, testing & commissioning of Twin lobe, rotary Air blower (1W+1S) capable of delivering below mentioned flow of free air at required pressure driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply for Equalization Tank (5 m3/[email protected] kg/cm2) Flow: 10 m3/hr Pressure: 0.2 Kg Type: Twin Lobe Power: 0.75 Kw |
| 8 | Agitator For Cogulation Tank Supply and installation of SS Shaft agitator for mixing tank for chemical mixing 1.0 1.0 Cromton /Alfa Laval/Sharplex 0.0 MOC Shaft- SS 304 MOC Blades- SS 304 Agitator Speed- 120-150 RPM Motor Power- 0.5 HP Shaft Length- 500 MM |
| 9 | SITC of Electromagnetic Flow meter (Line size 40 NB) |
| 10 | Agitator For Reaction Tank Supply and installation of SS Shaft agitator for mixing tank for chemical mixing 1.0 1.0 Cromton /Alfa Laval/Sharplex 0.0 MOC Shaft- SS 304 MOC Blades- SS 304 Agitator Speed- 70-80 RPM Motor Power- 0.5 HP Shaft Length- 500 MM |
| 11 | Tube Deck Media Supply and Installation of PVC Tube deck media for tube settler tank for settle the sludge in the bottom of tank 1.0 1.0 Universal/MM Aqua/PP Aqua 0.0 MOC- PVC Surface Area- 11 m2/m3 Angle of Inclination- 60 degree Colour- Balck Shape-Hexagonal Chevron Cross Section- 130 mm x 45 mm Tolerance- +/- 2 mm Vertical Hieght- 750 MM Thickness- 1 mm |
| 12 | PH Neutrilization dosing System Providing and fixing chemical dosing system with all accessories, suitable to dose chemical (of Lime or NaoH solution) to a Effluent water flow 200 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1.0 1.0 e-Dose/Aster/Fluidyne 0.0 System : Electronic Type Capacity : 0-6 LPH Feed Solution : Lime/ NaoH Conc. Of Solution : 0.1 MOC and Capacity of Tank : HDPE - 100 Litres |
| 13 | Coagulant dosing System Providing and fixing chemical dosing system with all accessories, suitable to dose chemical (of Alum solution) to a Effluent water flow 200 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1.0 1.0 e-Dose/Aster/Fluidyne 0.0 System : Electronic Type Capacity : 0-6 LPH Feed Solution : Alum/Fecl3 Conc. Of Solution : 0.1 MOC and Capacity of Tank : HDPE - 100 Litres |
| 14 | Poly dosing System Providing and fixing chemical dosing system with all accessories, suitable to dose chemical (of Poly solution) to a Effluent water flow 200 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1.0 1.0 e-Dose/Aster/Fluidyne 0.0 System : Electronic Type Capacity : 0-6 LPH Feed Solution : Poly Conc. Of Solution : 0.1 MOC and Capacity of Tank : HDPE - 100 Litres |
| 15 | Pipe & Fittings ETP Supply and Insattlation of upvc Schd 40 pipe for interconnecting of Pumps Suctions, Delievery Header and sludge transfer and clear water transfer to STP and Effluent transfer to mixing tank 1LOT 1.0 Supreme/Ashirvad/Astral 0.0 Schd-40 MOC- Upvc |
| 16 | Instruments Supply and Installation of Pressure Gauges and Level float switches in the tanks for levels the effluent 1LOT 1.0 H Guru/Bourdan/Waree 0.0 Pressure gause dia- 2 Inch (Pressure upto 3 Kg) Level sensor- Float type (Tank Conisder: Equalization tank, Sump tank, Clear Water tank) 3 Nos 3.0 Ocean star/Himstag/Honeywell 0.0 |
| 17 | Electrical Panel ETP Design, manufacture, assembly, wiring, testing at works and supply to site of following panels/distribution boards/switch boards including the Cable tray and cable and wire for connection. 1.0 1.0 CPRI Approved Panel manufacturer 0.0 Outgoings DOL Starter Feeders for: (2 Nos.) (Sludge Transfer Pump) (2 Nos.) (Effluent Transfer Pump) (3 Nos) ETP Dosing Pump (2 Nos.) (Sump Transfer Pump) (2 Nos.) (Air Blower) Mixing Tank Agitator Reaction Tank Agitator Connecting Cables, cable tray and necessary accessories to be considered |
| 18 | MSFRP units ETP Supply and Installtion of MSFRP Tanks ETP Including Coagulation and flocculation and tube settler tank and clear water tank with the FRP Coated 1.0 4.0 Fabricated - Reputed Make 0.0 Sheet Thickness- 5 MM FRP Coating- 2-3 MM Tanks Mixing Tank- MOC - MSFRP- Size-500 x 700 x 800 (MM) Reaction Tank- MOC - MSFRP-Size-1000 x 700 x 800 (MM) Tube settler Tank- MOC - MSFRP-Size-1200 x 1500 x 2000 (MM) Clear water tank- MOC - MSFRP-Size-1000 x 1500 x 2000 (MM) |
| 19 | MS Shade Cover for ALL Electromachenical Equipments of ETP Like Pumps and Air Blower and dosing pumps |
| 20 | Civil Pedestal for Pumps and MSFRP Tanks and Air blower etc. Basic cost without GST 0.0 Grand Total with GST 0.0 Sr,No Description of Work Unit Qty MAKE Basic rate GST Amount |
| 21 | Effluent Treatment Plant Capacity = 21KLD Supplying, installation, testing and commissioning of pre-treatment plant for Laundry, Labs, OT wastewater of following capacity with the equipments listed below, including mechanical & electrical cost. The treated water should meet the required standards for discharging to the domestic sewage treatment plant. Civil Pedestals to be considered wherever required Anticipated effluent parameters before treatment: PH - 6.5 - 11 BOD5 - 300 mg/lt COD - 800 mg/lt. Oil & Grease - 7 mg/lt. DISCHARGE EFFLUENT CHARACTERSTICS AFTER PHYSICO-CHEMICAL TREATMENT pH - 6.5 – 8.5 BOD - Less than 100 Mg/L S. Solids - Less than 80 Mg/L COD - Less than 180 Mg/L Oil & Grease - Less than 5 Mg / L Odor - unobjectionable EFFLUENT TREATMENT SHALL INCLUDE THE FOLLOWING ITEMS- Civil tanks constructed Bar screen Chamber- RCC by Client Oil & Grease chamber- RCC by client Equalization Tank- RCC by client Mixing Tank-MSFRP tank to be considred by Bidder Reaction Tank- RCC by Client Tube settler tank- RCC by client Clear water tank- RCC by client Overall ETP Daily Capacity KLD - 15 KLD Operationg Hours - 20 Maximum Normal Flow - 0.75 CuM / Hr. Peak Factor - 3 1.0 1.0 0.0 |
| 22 | Bar Screen Supply, installation, testing & commissioning of Stainless Steel Perforated, Corrugated Bar Screen with suitable lifting arrangement - Domestic Effluent 1.0 1.0 Jindal /SAIL 0.0 MOC- SS 304 SIZE- 600 x 800 MM Angle of Inclination- 60 Degree Bar spacing- 15 MM Size of Bars- 10-12 MM |
| 23 | Effluent Transfer Pump Providing Submersible pumps for the transfer of effluent from Equalization tank to mixing tank with Cast Iron impeller and cast steel shaft with mechanical seal, with TEFC induction motor of class \\"F\\" insulation & efficiency class EFF-2, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply, 2900 RPM complete in all respects and as per specification with the following capacities: 1 Set 2.0 Grundfos/Kirloskar/Xylem 0.0 Pump Headers and other interconnecting to be Upvc Complete inlet, outlet and header piping of suitable dia (velocity shall not exceed 1.5m/s) -- 1 Lot Dual Plate NRV of appropriate dia and rating One set includes 2 nos. of pumps - 1 working + 1 standby Civil Pedestals to be considered Discharge : 1.5 m3/Hr Head : 10 m Solid Handling : 7-10 mm Motor Power: 0.75 Kw Motor Efficiency : IE3 |
| 24 | Sludge Transfer Pump Providing and fixing Non-Clogg centrifugal Sludge pumps for the transfer of sludge from tube settler with Cast Iron impeller and cast steel shaft with mechanical seal, with TEFC induction motor of class \\"F\\" insulation & efficiency class EFF-2, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply, 2900 RPM complete in all respects and as per specification with the following capacities: 1 Set 2.0 Grundfos/Kirloskar/Xylem 0.0 Pump Headers and other interconnecting to be Upvc Civil Pedestals to be considered Complete inlet, outlet and header piping of suitable dia (velocity shall not exceed 1.5m/s) -- 1 Lot Dual Plate NRV of appropriate dia and rating One set includes 2 nos. of pumps - 1 working + 1 standby Discharge : 1 m3/Hr Head : 10 m Solid Handling : 7-10 mm Motor Power: 0.75 Kw Motor Efficiency : IE3 |
| 25 | Agitator For Cogulation Tank Supply and installation of SS Shaft agitator for mixing tank for chemical mixing 1.0 1.0 Cromton /Alfa Laval/Sharplex 0.0 MOC Shaft- SS 304 MOC Blades- SS 304 Agitator Speed- 120-150 RPM Motor Power- 0.5 HP Shaft Length- 500 MM |
| 26 | Agitator For Reaction Tank Supply and installation of SS Shaft agitator for mixing tank for chemical mixing 1.0 1.0 Cromton /Alfa Laval/Sharplex 0.0 MOC Shaft- SS 304 MOC Blades- SS 304 Agitator Speed- 70-80 RPM Motor Power- 0.5 HP Shaft Length- 500 MM |
| 27 | Tube Deck Media Supply and Installation of PVC Tube deck media for tube settler tank for settle the sludge in the bottom of tank 1set 1.0 Universal/MM Aqua/PP Aqua 0.0 MOC- PVC Surface Area- 11 m2/m3 Angle of Inclination- 60 degree Colour- Balck Shape-Hexagonal Chevron Cross Section- 130 mm x 45 mm Tolerance- +/- 2 mm Vertical Hieght- 750 MM Thickness- 1 mm |
| 28 | PH Neutrilization dosing System Providing and fixing chemical dosing system with all accessories, suitable to dose chemical (of Lime or NaoH solution) to a Effluent water flow 200 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1.0 1.0 e-Dose/Aster/Fluidyne 0.0 System : Electronic Type Capacity : 0-6 LPH Feed Solution : Lime/ NaoH Conc. Of Solution : 0.1 MOC and Capacity of Tank : HDPE - 100 Litres |
| 29 | Coagulant dosing System Providing and fixing chemical dosing system with all accessories, suitable to dose chemical (of Alum solution) to a Effluent water flow 200 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1.0 1.0 e-Dose/Aster/Fluidyne 0.0 System : Electronic Type Capacity : 0-6 LPH Feed Solution : Alum/Fecl3 Conc. Of Solution : 0.1 MOC and Capacity of Tank : HDPE - 100 Litres |
| 30 | Poly dosing System Providing and fixing chemical dosing system with all accessories, suitable to dose chemical (of Poly solution) to a Effluent water flow 200 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1.0 1.0 e-Dose/Aster/Fluidyne 0.0 System : Electronic Type Capacity : 0-6 LPH Feed Solution : Poly Conc. Of Solution : 0.1 MOC and Capacity of Tank : HDPE - 100 Litres |
| 31 | SITC of Electromagnetic Flow meter (Line size 40 NB) |
| 32 | Pipe & Fittings ETP Supply and Insattlation of upvc Schd 40 pipe for interconnecting of Pumps Suctions, Delievery Header and sludge transfer and clear water transfer to STP and Effluent transfer to mixing tank 1lot 1.0 Supreme/Ashirvad/Astral 0.0 Schd-40 MOC- Upvc |
| 33 | Instruments Supply and Installation of Pressure Gauges and Level float switches in the tanks for levels the effluent 1lot 1.0 0.0 Pressure gause dia- 2 Inch (Pressure - 3 Kg)-3 Nos H Guru/Bourdan/Waree Level sensor- Float type Tanks Consider Equalization tank Clear water tank Ocean star/Himstag/Honeywell |
| 34 | Electrical Panel ETP Design, manufacture, assembly, wiring, testing at works and supply to site of following panels/distribution boards/switch boards. 1.0 1.0 CPRI Approved Panel manufacturer 0.0 Outgoings DOL Starter Feeders for: (2 Nos.) (Sludge Transfer Pump) (2 Nos.) (Effluent Transfer Pump) (3 Nos) ETP Dosing Pump Mixing Tank Agitator Reaction Tank Agitator Connecting cables, cable tray, and necessary accessories to be considered basic Cost without GST 0.0 Grand Total with GST 0.0 Sr.No Description of Work Unit Qty MAKE Basic rate GST Amount |
| 35 | Effluent Treatment Plant Capacity = 36 KLD Supplying, installation, testing and commissioning of pre treatment plant for Laundry, Labs, OT wastewater of following capacity with the equipments listed below, including mechanical & electrical cost. The treatedwater should meet the required standards for discharging to the domestic sewage treatment plant. Anticipated effluent parameters before treatment: PH - 6.5 - 11 BOD5 - 300 mg/lt COD - 800 mg/lt. Oil & Grease - 7 mg/lt. DISCHARGE EFFLUENT CHARACTERSTICS AFTER PHYSICO-CHEMICAL TREATMENT pH - 6.5 – 8.5 BOD - Less than 100 Mg/L S. Solids - Less than 80 Mg/L COD - Less than 180 Mg/L Oil & Grease - Less than 5 Mg / L Odor - unobjectionable EFFLUENT TREATMENT SHALL INCLUDE THE FOLLOWING ITEMS ( CIVIL Tanks have been constructed Bar screen Chamber Oil & Grease chamber Equalization Tank Mixing Tank Reaction Tank Tube settler tank Clear water tank Overall ETP Daily Capacity KLD - 36 KLD Operationg Hours - 20 Maximum Normal Flow - 1.8 CuM / Hr. Peak Factor - 3 |
| 36 | Bar Screen Supply, installation, testing & commissioning of Stainless Steel Perforated, Corrugated Bar Screen with suitable lifting arrangement - Domestic Effluent 1.0 1.0 Jindal /SAIL 0.0 MOC- SS 304 SIZE- 600 x 800 MM Angle of Inclination- 60 Degree Bar spacing- 15 MM Size of Bars- 10-12 MM |
| 37 | Effluent Transfer Pump Prociding Submersible pumps for the transfer of effluent from Equalization tank to mixing tank with Cast Iron impeller and cast steel shaft with mechanical seal, with TEFC induction motor of class \\"F\\" insulation & efficiency class EFF-2, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply, 2900 RPM complete in all respects and as per specification with the following capacities: 1 Set 2.0 Grundfos/Kirloskar/Xylem 0.0 Pump Headers and other interconnecting to be Upvc Complete inlet, outlet and header piping of suitable dia (velocity shall not exceed 1.5m/s) -- 1 Lot Dual Plate NRV of appropriate dia and rating One set includes 2 nos. of pumps - 1 working + 1 standby Discharge : 2 m3/Hr Head : 10 m Solid Handling : 7-10 mm Motor Power: 1.49 Kw Motor Efficiency : IE3 |
| 38 | Sludge Transfer Pump Providing and fixing Non-Clogg centrifugal Sludge pumps for the transfer of sludge from tube settler with Cast Iron impeller and cast steel shaft with mechanical seal, with TEFC induction motor of class \\"F\\" insulation & efficiency class EFF-2, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply, 2900 RPM complete in all respects and as per specification with the following capacities: 1 Set 2.0 Grundfos/Kirloskar/Xylem 0.0 Pump Headers and other interconnecting to be Upvc Complete inlet, outlet and header piping of suitable dia (velocity shall not exceed 1.5m/s) -- 1 Lot Dual Plate NRV of appropriate dia and rating One set includes 2 nos. of pumps - 1 working + 1 standby Discharge : 1 m3/Hr Head : 10 m Solid Handling : 7-10 mm Motor Power: 0.5 Kw Motor Efficiency : IE3 |
| 39 | Agitator For Cogulation Tank Supply and installation of SS Shaft agitator for mixing tank for chemical mixing 1.0 1.0 Cromton /Alfa Laval/Sharplex 0.0 MOC Shaft- SS 304 MOC Blades- SS 304 Agitator Speed- 120-150 RPM Motor Power- 0.5 HP Shaft Length- 500 MM |
| 40 | Agitator For Reaction Tank Supply and installation of SS Shaft agitator for mixing tank for chemical mixing 1.0 1.0 Cromton /Alfa Laval/Sharplex 0.0 MOC Shaft- SS 304 MOC Blades- SS 304 Agitator Speed- 70-80 RPM Motor Power- 0.5 HP Shaft Length- 500 MM |
| 41 | Tube Deck Media Supply and Installation of PVC Tube deck media for tube settler tank for settle the sludge in the bottom of tank 1set 1.0 Universal/MM Aqua/PP Aqua 0.0 MOC- PVC Surface Area- 11 m2/m3 Angle of Inclination- 60 degree Colour- Balck Shape-Hexagonal Chevron Cross Section- 130 mm x 45 mm Tolerance- +/- 2 mm Vertical Hieght- 750 MM Thickness- 1 mm |
| 42 | PH Neutrilization dosing System Providing and fixing chemical dosing system with all accessories, suitable to dose chemical (of Lime or NaoH solution) to a Effluent water flow 200 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1.0 1.0 e-Dose/Aster/Fluidyne 0.0 System : Electronic Type Capacity : 0-6 LPH Feed Solution : Lime/ NaoH Conc. Of Solution : 0.1 MOC and Capacity of Tank : HDPE - 100 Litres |
| 43 | Coagulant dosing System Providing and fixing chemical dosing system with all accessories, suitable to dose chemical (of Alum solution) to a Effluent water flow 200 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1.0 1.0 e-Dose/Aster/Fluidyne 0.0 System : Electronic Type Capacity : 0-6 LPH Feed Solution : Alum/Fecl3 Conc. Of Solution : 0.1 MOC and Capacity of Tank : HDPE - 100 Litres |
| 44 | Poly dosing System Providing and fixing chemical dosing system with all accessories, suitable to dose chemical (of Poly solution) to a Effluent water flow 200 lph. against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 100 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc.complete as required and as specified. 1.0 1.0 e-Dose/Aster/Fluidyne 0.0 System : Electronic Type Capacity : 0-6 LPH Feed Solution : Poly Conc. Of Solution : 0.1 MOC and Capacity of Tank : HDPE - 100 Litres |
| 45 | SITC of Electromagnetic Flow meter (Line size 40 NB) |
| 46 | Pipe & Fittings ETP Supply and Insattlation of upvc Schd 40 pipe for interconnecting of Pumps Suctions, Delievery Header and sludge transfer and clear water transfer to STP and Effluent transfer to mixing tank 1lot 1.0 Supreme/Ashirvad/Astral 0.0 Schd-40 MOC- Upvc |
| 47 | Instruments Supply and Installation of Pressure Gauges and Level float switches in the tanks for levels the effluent 1lot 1.0 H Guru/Bourdan/Waree 0.0 Pressure gause dia- 2 Inch (Pressure - 3 Kg) Pressure - 3 Kg Level sensor- Float type Tank consider Equalization tank, Clear water tank |
| 48 | Electrical Panel ETP Design, manufacture, assembly, wiring, testing at works and supply to site of following panels/distribution boards/switch boards. 1.0 1.0 CPRI Approved Panel manufacturer 0.0 Outgoings DOL Starter Feeders for: (2 Nos.) (Sludge Transfer Pump) (2 Nos.) (Effluent Transfer Pump) (3 Nos) ETP Dosing Pump Mixing Tank Agitator Reaction Tank Agitator Connecting cables, cable tray, and all necessary accessories to be considered Basic Cost without GST 0.0 Grand Total with GST 0.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender