Tender For Special Repair To Bldg No P-02 Operation Theatre At 170 Mh Under Ge (N) Akhnoor.
Tender Value
37.27 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
11 days left
EMD
75000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-02 Operation Theatre At 170 Mh Under Ge (N) Akhnoor.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old u/s Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 2 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 3 | Supply and fixing in repair modular Lay-In Grid ceiling system which includes fixing of E grid frame work Comprising of pre coated wall angle of size 24x24x3000mm and 0.35mm thick screw fixed to the periphery of the walls/Partions at the desired ceiling height with PVC dash fasteners (nylon sleeves) and steel screws at 300mm c/c.GI main Tee runners with pre coated steel capping of size 24x38x3600mm and 0.25mm thick snail then be suspended from the soffit/purlins with 4mm dia hanger GI wire ,soffit cleats of size 27x35x25mm and 1.6mm thick and 6x4mm Metal Anchor,fasteners (Rawl plugs) at 1200mm c/c.Grid module size of 600x1200mm shall be inially achieved by insert fixing Tee of size 24x25x1200mm and 0.25mm thick into the main runner @600mm centers using the snap bayonet fixing mechanism.Finally the desired 600x600mm grid mould shall be achieved by insert fixing 600mm cross.Tee of size 24x25x600mm and 0.25mm thick into the 1200mm cross Tee @600mm centre and in diretion perpendicular to it 6mm pre painted Antimicrobial BIOCLEAN(Make Everst) ceiling tiles of size 595mmx595mm(Confirming to IS 14862:2000 type B Category III (Density 1340Kg/m3,MOR at EMC 10Mpa and MOR in wet condition 7Mpa,Fire tested in accordance to ASTM E84-18B and as non combustible as per BS 476 part4, Fire propogation index of 1=0.8 as per BS 476 part6 and surface frame of class 1 rating as per BS 476 part 7 with no found fungal growth as per latest method AATCC 30 part3,Light reflectance 93% as per ISO 1950:2003 EN 12898:2019&EN 673:2011)shall be palced over the grit complete all as specified and as directed. |
| 4 | Demolition of brick works or stone boulder masonary built in cement mortar including all quions and,arches,pillars etc., but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 5 | Brick work with sub class 'B' brick(using old size burn bricks) straight or curved on plan exceeding 6m mean radius built in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | Taking down cement plaster, on brick or stone wall etc including racking out joints for key scrubbing down with water etc to receive new plaster etc complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removingserviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | Rendering 5 mm thick in CM (1:3) as in ceiling finished even & smooth w/o using extra cement complete all as specified and directed. |
| 9 | Rendering 15mm thick on fair faces of brick works or concrete surfaces of walls in CM (1:4) finished even & smooth w/o using extra cement including mixing of WPC Compound as per manufactures instructions (WPC to be measured and paid seperatly as supply only). |
| 10 | Rendering 15mm thick on other than fair faces of brick works or concrete surfaces of walls in CM (1:6) finished even & smooth w/o using extra cement complete all as specified and directed. |
| 11 | Preparation of newly palstered surfcaes of walls and applying two coat of oil bound distemper over one coat of chalk whitening on plastered surfaces prepartry to distemper complete all as specified and directed. |
| 12 | Preparation of newly plastered surfaces of ceiling and applying 3mm thick wall care puty over one coat of primer and applying two coats oil bound distemper complete all as specified |
| 13 | Preparation on old plastered surfaces of walls and applying 3mm thick wall care putty over one coat of interior wall primer and prepared the surfaces and applying 2 coats of Anti fungal low VOC interior emulsion to smoth finished with roller of min 5 years warranty complete all as specified and directed. |
| 14 | Preparation of plastered or un plastered on old surfaces of walls and applying 3mm thick external wal smoothl care putty over two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete with min 5 years warranty of the paint complete all as specified and directed. |
| 15 | Preparation of new plastered surfaces of walls and applying 3mm thick external wall care putty and applying two or more coats of 100% Premium acrylicexterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete with min 5 years warranty of the paint complete all as specifiedd and directed. |
| 16 | Demolition of cement concrete in ground floors & paving not exceeding 15cm thick (above or below GL) complete all as specified and directed. |
| 17 | Ditto All as per item No 16 above but reinforced as in chajjas shelves,roof slab and cover slab etc. |
| 18 | Taking down of existing old tarfelt , waterproofing membrane, water proofing plaster of any description any type over RCC roof including any roof tiles, cement mortar screed, concrete screed of any thickness, roughening surfaces to receive plaster/screed etc including desposing off debris from MoD land complete all as specified and directed. |
| 19 | Rendering 10mm thick on roof surfaces incl parapet etc in CM 1:3 finished even and smooth using extra cement and mixed with water compound as per manufacturer`s instructions etc complete all as specified and directed. |
| 20 | Supply only liquid water proofing compound conforming to IS 2645-1975 of approved make complete all as specified and directed.(Dosage- @ 200ml per 50Kgs of Bags of cement) complete all as specified and directed. |
| 21 | Water proofing treatment to RCC roof slab including parapet as under:-(a) Ist Course:- Apply a coat of bituminous primer confirming to IS-3384 @0.40Kg/Sqm on prepared surfaces of plaster and after drying of primer,apply a coat of hot bitumin blown 85/25 grade bitumen confirming to IS [email protected] kg/sqm on plastered surfaces.(b) IInd Course:- APP(Atactic Polyprepyline) modified polymeric,membrane,5 layered,3mm thick weight not less than 3.0 kg/sqm with 160 grams/sqm non woven polyester made at centre core reinforced laid with 75mm side overlap and 150mm and overlap sealed and finished neat,all joints.(c) IIIrd Course:- On Non accessible roof after providing (a to b) over water proofing treatment apply semi hot bitumen blown 85/25 confirming to IS-702 @1.2 Kg/Sqm over the bitumein coat applying one coat of Aluminium paint all as per manufactures instructions. Note:-Complete treatement shall be carried out by the applicator of the manufacturs only or through their authorised personnel only |
| 22 | PCC 1:2:4 type B1(Using 20mm graded crushed stone aggregate) as in roof padding in roof slab for levelling course complete all as specified and directed. |
| 23 | Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed. |
| 24 | Machine cut kota stone slab flooring of size not less than 53x53cm and 20-25 mm thick laid and jointed with grey cement slurry and mixed with pigment to ;match the shade of slab incl rubbing and polishing with mirror cut polishing 100mm wide marble patti/border all around including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 25 | Kota stonein vertical surfaces such as riser of steps skirting dado or pillar etc ditto including 10 mm thick plaster in CM 1:4 complete all as specified.. |
| 26 | Non skid coloured or printed ceramic tiles 7 to8mm(Square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc(size of tiles 400x400mm) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shad of tiles including 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed. |
| 27 | Material labour for surface should be free from oil,moisture and greese,and Preparation of surface by cleaning.grinding and groove cutting with the help of electric grinder.Providing and laying the 1mm scratch coat (primer) with \\"FloArm HPU4 Plusand after 24 hours of scratch coat,Providing and laying 4 mm thick PU final coat with \\"FloArm HPU4 Plus with the help of trowel and spike roller complete all as specified and directed. |
| 28 | Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, and floor like in cement mortar (1:4) including pointing in white cement (1:2) usingmarble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in CM 1:4complete all as directed. |
| 29 | Ceramic coloured tiles as in vertical surfaces of size 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15 mm thick plaster in CM 1:4 complete all as specified and directed. |
| 30 | Glazed ceramic coloured Digital tiles in vertical surface 600x1200x7-8 mm thick Glosy/matt finish, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 rendering complete all as specified and directed. |
| 31 | PCC (1:2:4) type B-1 (using 20mm graded stone aggregate as in 50mm thick plinth protection/paths etc laid in alternate bays system each bays n exe. 2.0 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints through out the thickness of plinth protection in concrete bays and in between the walling and plinth protection,filling the joints with mastic filling comprising one part of bitumen 85/25 or 96/10 grade 3 parts of sand (all by weight) complete all as specified. |
| 32 | Plain cement concerete 1:2:4 type B0 25 mm thick (12.5 mm graded aggregate ) as in floor finished even and fair for receiving tiles complete all as specified |
| 33 | Reparis to balcony/Facia and soffit of chajjas etc by taking down old rendering 15mm thick to match the existing thickness in CM 1:4 and hacking clearley the edges and corners smooth and rounded for new plastered area exceeding 30 sqcm in width or girth incl preparation of surfaces and applying two coats exterior emulsion weather proof paint (Apex) as required over one coat of primer incuding scaffolding work upto height of 7.0mtr complete all as specified and as directed. |
| 34 | RCC (1:2:4) type B-0 (using 12.5mm graded aggregate) nominal mix as in Chajjas and Balcony/Landing work if any complete all as specified. |
| 35 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces complete all as specified and directed. |
| 36 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 37 | Reinforcement cement concrete (Nominal Mix 1:2:4) using (20mm graded aggregate ) as in slabs supported on walls,beams and columns in floors,roofs,landings,balconies,canopies cantilever shelves and the like complete all as specified and as directed. |
| 38 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thic (Horizontal or sloping))sides including supports,overhangs for fair finished surface of concrete etc.,complete all as specified |
| 39 | Taking down chowkat or frames with shutters w/o taking off shutter from the frame n. exceeding 1.5 Sqm each and removing from site complete all as specified and directed.. |
| 40 | Taking down chowkat or frames with shutters w/o taking off shutter from the frame exceeding 1.5 Sqm but n.exc 4.0 sqm each and removing from site complete all as specified and directed.. |
| 41 | Aluminium powder coated door shutter with powder coated frame of size 65mm x 50 mm x 1.6 mm thick fixed with hinges and shutter with top rail,bottom rail, middle rail and style of size 85mmx 44mm x 1.6 mm thick with 200mm size aluminium handle on both side of shutter aliminium tower bolt 150 mm long 2 Nos per leaf including 5.5 mm thick selected quality , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed hydraulic door closer for each leaf , mortic lock 4 levers with 2 Nos key , 3Nos butt hinges of stainless steel for each shutter including provn of 8 mm dia nut and bilt on both side of top rail and bottom rail complete all as specified and as directed. |
| 42 | Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including 5.50mm thick pin head glass complete all as specified |
| 43 | Stainless steel Automatic sliding door of clear opening of 800mmx2500mm including SS 304 garde handle of size 300mm and provision of view window of size 300x300mm,400x400mm as per site reqt with 5mm thick toughned glass and cylindrical lock system with microprocessor based controller operting system with almunium extruded profile with high smoothness of any colour complete all as per site requirment and submit the specification for approval of GE complete all as specified and directed. |
| 44 | Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 45 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 46 | 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 47 | Butt hinges of size 100mm medium weight, cold rolled complete all as specified and directed. |
| 48 | Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. |
| 49 | Aluminium anodised handles cast type of 100mm size ISI marked complete all as specified. |
| 50 | Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) & fixng clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded section of size 300mm long complete all as specified and directed. |
| 51 | Curtain rail 20mm dia stainless steel chromium plated fixed with ss CP brackest incl taking down old u/s Curtain rod in repairs complete all as specified and directed. |
| 52 | Single piece Rimless bowl with cistern for extended wall hung WC with PP soft close seat cover,hinges ,dual flush cistern fittings,and all accessories as per Jaquar Cat part No- FLS-WHT-5353PPZ or its equivalent make all as specified and as directed. |
| 53 | Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) in repairs complete all as specified and as directed. |
| 54 | PVC valve less symphonication type low level flushing cistern white 10 ltr capacity with inlet,ball valve ,manually operated with one pvc ball valve operated with horizantally plunger type including provision of PVC 32 mm dia flush pipe of required length and making connections complete fixed as in repairs complete all as specified and directed. |
| 55 | Vitreous China, wash basin white, flat back, size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass.including pedestal of same colour of WHB in repairs complete all as specified and as directed. |
| 56 | Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses Also available in repairs complete all as per directed and specified. |
| 57 | PVC connection 15x600mm long with PTMT nuts & bolts complete in repairs all as specified and directed. |
| 58 | Statinless steel surgion scrup sink with two sink unit including all fittings such as swan neck pillar cock and angle valve,PVC connection complete all as per required for connected items and as directed. |
| 59 | CP brass angle valves / stop cock (Weight not lessthan 0.40kg as mentioned in SSR Part-I Cl 18.14.2)of cost copper alloy (ISI Marked) CP fancy type screwed down high pressure with capstain head screwed both ends for iron pipes 15mm bore fixed as in repairs complete all as specified and directed. |
| 60 | 15mm bore CP brass bib cock long body fancy type CP with crutch or butterfly handle screwed down ,screwed for iron pipe for brass ferrule complete fixed as in repairs complete all as specified and directed |
| 61 | Single lever florentine surgical purpose elbow action bib cock with extended lever handle and wall flange cast copper alloy, chromium plated, in repairs complete all as specified. |
| 62 | CP brass wall mixture for mixing hot and cold supply screwed down incl connecting legs &wall flanges for iron pipe of 15mm bore fancy type fixed as in repairs complete all as specified |
| 63 | Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf (9''x9\\" i.e 230x230) with chromium plated bracket guard and complete all as specified and as directed. |
| 64 | CP brass towel rail 20mm dia 60cm long including bracket fancy type heavy weight as approved. |
| 65 | Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified. |
| 66 | 5.5mm thick bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated beads screws & cup washeres complete all as specified and directed. |
| 67 | Bath cabinet of size 360mmx450mmx90mm deep with glass of size 320mmx450mmx3mm thick complete all as specified and directed. |
| 68 | Taking up or down steel tubing and connection and removing to store bore of pipe 15mm dia |
| 69 | -Ditto- all as per Items No 68. here in before but bore of pipe 20mm dia |
| 70 | Supplying and laying of 15mm bore GI tubing (Medium grade) with all fittings and fixed complete fixed to walls and ceiling and floor/roof complete all as specified. |
| 71 | Supplying and laying of 20mm bore GI tubing (Medium grade) with all fittings and fixed complete fixed to walls and ceiling and floor/roof complete all as specified. |
| 72 | Supply and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per directed and specified. |
| 73 | Dismantling water tanks and removing to store capacity exceeding 250 ltrs and not exceeding 500 ltrs complete all as per specified and directed. |
| 74 | Rotational moulded VC water tank double layered (Cylindrical vertical with closed top) 500 ltrs capacity hoisted and fixed in position all as specified |
| 75 | Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) in repairs complete all as specified and as directed. |
| 76 | Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of bore 20mm complete all as specified and directed. |
| 77 | Taking down drainage,eaves gutters and rainwater pipes (any size or pattern any position), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 78 | PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall weight of pipe not less than 0.70 Kg/RM complete all as specified and directed. |
| 79 | PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints and laid trenches in floors weight of pipe not less than 0.70 Kg/RM complete all as specified and directed. |
| 80 | PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall weight of pipe not less than 0.70 Kg/RM complete all as specified and directed. |
| 81 | PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints and laid trenches in floors weight of pipe not less than 0.70 Kg/RM complete all as specified and directed. |
| 82 | PVC (SWR) branch bends any radius 110mm bore of pipe complete all as specified and directed. |
| 83 | 110mm dia PVC SWR junction (single T) equal or un equal oval acces door complete all as specified and as directed. |
| 84 | PVC (SWR) branch bends any radius 75 mm bore of pipe complete all as specified and directed. |
| 85 | PVC Junction,(single T)equal or unequal ordinary or inverted with spigot or socket branch of 75mm bore complete all specified |
| 86 | PVC SWR branch piece,75mm single (single Y) equal or un equal inverted in spigot or socket type all as specified and as directed. |
| 87 | PVC (SWR) vent cowl for 75mm bore pipe complete all as specified and directed. |
| 88 | 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified |
| 89 | Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of 100 mm bore of pipe complete all as specified and directed. |
| 90 | Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of 75 mm bore of pipe complete all as specified and directed. |
| 91 | PCC 1: 2:4 type B0 using 12.5mm graded stone aggregate mixed with water proofing compound as per manufacturer`s instruction as in copings, roof kerb etc including weathering, slightly rounded or chamfered angles and throating etc completed all as specified and directedNote:WPC to be measured and paid seperately Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender