Tender For Addition/Alteration To Mdtc Ward At Chaf Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Sep 2026
3 days left
EMD
9678
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Mdtc Ward At Chaf Banglaore
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc., complete all as specified and as directed by Engr-in-charge. |
| 2 | Demolition brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-charge. |
| 3 | Material and labour for type B-1, 1:2:4 (Using 20mm graded stone aggregate) as in copings,roof kerbs, buttresses columns, pillars, boundary pillars and posts (incl caps and bases) complete all as specified and as directed by Engr-in-charge. |
| 4 | Material and labour for precast cement concrete block masonry with soild blocks, type C1 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 5 | Material and labour for providing, cement concrete type B-0 1:2:4 (Using 12.5mm graded stone aggregate) as in roof kerbs, padding or mud stops, rounded or chamfered on edges complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for rendering 10mm thick in cement mortar 1:6 and 5mm thick in cement mortar 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc., finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.Notes: (i) WPC shall be measured and paid separately.(ii) Scaffolding upto tripple storey deemed be included in the rate quoted by contractor . |
| 8 | Supply only liquid water proofing compound complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for stone walls cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 20cm girth complete all as specified and as directed by Engr-in-charge. |
| 10 | Supply and fix for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 11 | Supply and fix for roof trusses (framed), trussed, purlins, crane gantries, rails and fastnings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., fe-410 (gde E-250) complete all as specified and as directed by Engr-in-charge. |
| 12 | Supply and fix for plates (plain or chequered) channels, distance pieces, cleats etc., square cut or notched including riveted, bolted or welded attachment complete all as specified and as directed by Engr-in-charge. |
| 13 | Material and labour for water proofing treatment on horizontal and vertical surfaces with applying of oil bound bitumen primer @ 0.20 Kg/sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/sqm reinforced with non woven polyester matt weighing not less than 160 grm/sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/ 5cm and 350 N/ 5cm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch on application including minimum 10cm side over lap and 15 cm end lap applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.20 Kg/sqm finished with solar reflective bituminus paint/ primer @ 0.10 kg per sqm incl dismantling of existing APP membrane complete all as specified and as directed by Engr-in-charge. |
| 14 | Material and labour for preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and as directed by Engr-in-charge. |
| 15 | Material and labour for applying 2mm thick wall care putty on wall including preparation old surface/ new surfaces plastered or unplastered surfaces complete all as specified and as directed by Engr-in-charge. |
| 16 | Material and labour for preparing old plastered or unplastered surface of walls and applying two coats of cement base paint on walls complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds, moss and efflorescent salts and treating oily and greasy spot filling holes and cracks with suitable material like white cement or plaster of paris and applying two coats of oil bound distemper through mechanical means including necessary scaffolding upto 6th storey complete all as specified and as directed by Engr-in-charge. |
| 18 | Material and labour for preparing new plastered or unplastered old surface of walls and applying two coats of cement base paint on walls including with alkali resistant priming paint complete all as specified and as directed by Engr-in-charge. |
| 19 | Material and labour for two coats of synthetic enamel paint on new steel surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including preparing roof painting complete all as specified and as directed by Engr-in-charge. |
| 20 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for sliding/openable doors, windows, ventilators and partitions fixed portions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, with using aluminium section 75x45x1.25mm as in partitions and door chowkhat section door section 47.62x44.45x1.67mm, middle section of door 83.5x44.45x1.49mm and bottom of door section 114.30x44.45x1.75mm and not less than weighing 0.55kg/m if any section required including necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws, sliding arrangements, including sheet glass of 5.5mm thick and 12mm thick both side prelaminated particle board etc., height of glass and particle as directed by Engr-in-charge as per site requirment incl dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket incl suitable hinge, aluminium handle and locking arrangements etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminiumsnap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all necessary arrangement complete all as specified and as directed by Engr-in-charge.Note: All the aluminium sections provided under this item as mentioned in the approved manufacturer's sections/fittings. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender