Housing Urban and Rular Development Government Departments Closing in 5 days TDR #57290836

Tender For Construction Of Peripheral Walling And Gate Around Division Office Complex Langate.

Issued by Government Departments · Kupwara, Jammu and Kashmir
Tender Value
59.90 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
5 days left
EMD
1.19 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Peripheral Walling And Gate Around Division Office Complex Langate.

BOQ

Name of Work:- Construction of peripheral walling and gate around Division Office Complex Langate.
Sl. No. Item Description
1PART A (Compound Walling)
2Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: (SOR No 15.7.4)
3Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar (SOR No. 15.9.2)
4Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth upto and including 240 cm girth. (SOR No 2.27.3)
5Beyond 30 cm girth upto and including 60 cm girth.
6Beyond 60 cm girth upto and including 120 cm girth.
7Beyond 120 cm girth upto and including 240 cm girth.
8Above 240 cm girth
9Earth work in excavation in all kinds of soil by mechinical means in trenches for foundation, drains, pipes, cables etc. (not exceeding 1.5 Mtr. In width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan depth up to 1.5 Mtr; including disposal of excavated earth and Root Cutting as per the directions of engineer incharge complete job. (SOR No 2.9.1)
10Supply & laying of dry stone soling including hand packing and ramming including all leads lifts cost & carriages of materials involved upto site of work complete (NON SOR)
11Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size Crushed, including all leds, lifts cost & avg carriages of materials upto site fo work complete. (SOR No 4.4.7)
12Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (SOR No 4.4.3)
13Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete job. (SOR No 5.3)
14Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. (SOR No 5.22.6)
15Providing and fixing 3\\" PVC pipes for weep holes (NON Sor)
16Centering and shuttering including strutting, propping etc. and removal of form work for: (SOR No 4.6)
17Wall Plinth
18Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
19Brick work with common burnt clay F.S.C. bricks of class designation 7.5 conforming to I:S: 2222 in Superstructure above plinth level upto floor five level in cement mortar 1:6 ( 1 cement : 6 coarse sand ) and curing complete Non Modular. COMPLETE JOB. (SOR No 6.1 & 6.2)
20Labour charges for fixing of avaliable Brick work with common burnt clay in Superstructure above plinth level upto floor five level in cement mortar 1:6 ( 1 cement : 6 coarse sand ) and curing complete in: With (non-modular) bricks COMPLETE JOB.(NON-SOR)
21Labour charges for fixing of avaliable Stone work in cement mortar 1:6 ( 1 cement : 6 coarse sand ) and curing complete in: COMPLETE JOB.(50% of item no 2)(NON-SOR)
22Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube (SOR No 10.26.1)
2312mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) (SOR No-13.1)
24Providing and Laying of 50mm Thick Cement Concrete Copping in 1:2:4 Mix 13.2 Nominal Size of Aggregate (NON SOR)
25Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Raised and cut pointing (SOR No-13.42.2)
26Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) (SOR No 13.55)
27Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture (SOR No 13.57.3)
28Supply and fixing the following sizes of RIGID PVC conduits 1.8 mm thick (ISI Marked) complete with necessories such as bends, junction boxes, pull boxes etc., in recess or on surface including cutting chases in the walls/floors and making good the same complete as required. (NON SOR)
29PART B (Gate)
30Earth work in excavation in all kinds of soil by mechinical means in trenches for foundation, drains, pipes, cables etc. (not exceeding 1.5 Mtr. In width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan depth up to 1.5 Mtr; including disposal of excavated earth and Root Cutting as per the directions of engineer incharge complete job. (SOR No 2.27.2)
31Supply & laying of dry stone soling including hand packing and ramming including all leads lifts cost & carriages of materials involved upto site of work complete (NON SOR)
32Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size Crushed, including all leds, lifts cost & avg carriages of materials upto site fo work complete. (SOR No 4.4.7)
33Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) (SOR No 5.1)
34Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)(SOR No 5.2)
35Reinforcement for R.C.C work, including straightening, cutting, bending, placing in position and binding all complete. Hot rolled deformed bars, including all carriages/ Head load of material involved. (SOR No 5.22.6)
36Centering and shuttering including strutting, propping etc. and removal of form work for: (SOR No 4.6)
37Foundations, footings, bases for columns
38Columns, piers, abutments, pillars, posts and struts
39Suspended floors, roofs, landings, balconies and access platforms
40Providing and laying chisel dressed Devri Stone (one or two faced) of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) l including curing.Fine chisel dressed incl Pointing, Polishing Complete Job (SOR No 7.44.1)
41Providing and Fixing of Cornices/Moulded Stones in cement mortar 1: 6 (1 cement : 6 coarse sand) l including curing.Fine chisel dressed incl Pointing, Polishing Complete Job (NON SOR)
42Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (SOR No 10.25.2)
43Providing and fixing 20 mm thick polished granite memorial /inauguration plaque of approved colour and shade, machine cut and polished, with machine engraved letters, figures and emblem, filled with black epoxy/enamel paint, including edge polishing, chamfering, fixing with approved stone adhesive/cementitious adhesive, all materials, labour, carriage, leads, lifts and incidentals complete (NON SOR) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57290836
AUTHORITY Government Departments
TENDER VALUE 59.90 Lakhs
LAST DATE 11-09-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of Peripheral Walling And Gate Around Division Office Complex Langate.
Basic Detail
Tender No 31/3111-20/2026-27/RnB/Langate Dated 01/09/2026
Bidding Type Tender
Location
City Kupwara
State Jammu and Kashmir
Key Dates
Publish Date 01 Sep 2026
Submission Date 11 Sep 2026
Open Date 12 Sep 2026
Finance
Tender Value 59.90 Lakhs
Tender Fee 1600
EMD 1.19 Lakhs
Exemption Not Available
Document List
8ec2a6d9-ab71-4dee-afe0-d8b34d577fb4.html
BOQ_1086240.xls
Tendernotice_1 (14).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 01, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Sep 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

8ec2a6d9-ab71-4dee-afe0-d8b34d577fb4.html

xls

BOQ_1086240.xls

pdf

Tendernotice_1 (14).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders