Tender For Provision Of Certain Br/Em Sanctioned Work Under Ge Af Trivandrum
Tender Value
49 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
20 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Br/Em Sanctioned Work Under Ge Af Trivandrum
BOQ
| Sl. No. | Item Description |
| 1 | SPECIAL REPAIRS TO BLDG NO P-96(OLD DG SET ROOM) AT 42 WEU B |
| 2 | B/R WORKS |
| 3 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | Cement concrete in PCC 1:3:6 type B1 foundations, filling and mass concrete complete all as specified and directed. |
| 6 | M&L Cement concrete 75 mm thick, type C-2, 1:3:6 (20mm graded aggregate) as in plinth protection etc complete all as specified and directed. |
| 7 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 8 | S & F steel rolling shutter 1.25 mm the of laths complete all as specified and directed. |
| 9 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed. |
| 10 | Taking down chowkats or frames exc 1.5 sqm and not exc 4 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed. |
| 11 | Providing and fixing factory made uPVC white colour Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber, Frame(60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he metered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mmx 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass,aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.]Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) (A) Area not exceeding 2.00 sqm each → ,complete all as specified and directed. |
| 12 | Providing and fixing factory made uPVC white colour casement(Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame(60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be miteredcut and fusion welded at all corners, including drilling old holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), Tprofile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall will 8mm x100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated).Corner striker. Secondary Strikers. Cylinder Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)complete all as specified and directed. |
| 13 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 Nos ss hinges fixed to frame complete all as specified and directed. of EIC |
| 14 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 15 | M&L 15 mm thick rendering in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces internal surfaces finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces external surfaces finished the surface even and smooth without using extra cement & WPC complete all as specified and directed. |
| 17 | Supply only water proofing compound complete all as specified and directed. |
| 18 | M&L PCC 1:2:4 type B1 using 20mm graded stone aggregates as flooring finished even and smooth with using extra cement complete all as specified and directed. |
| 19 | S & F4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side complete all as specified and directed. |
| 20 | M & L for complete removal of existing treatment and applying two coats ofacrylic emulsion over a coat of primer complete all as specified and directed. |
| 21 | M & L preparing new surfaces and applying two coats ofacrylic emulsion over a coat of primer complete all as specified and directed. |
| 22 | M & L for preparing old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed. |
| 23 | M&L Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide complete all as specified and directed |
| 24 | M & L for complete removal of existing treatment and applying two coats of weather coat paint (Acrylic exterior emulsion paint-Antifungal paint) over a coat of primer complete all as specified and directed. |
| 25 | M&L for preparation of new plastered surface of wall and applying two coats of weather coat paint (Acrylic exterior emulsion paint-Antifungal paint) over a coat of primer complete all as specified and directed. |
| 26 | Framed work such as grills, and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 27 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 28 | S&F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/sqcm fixed complete to wall, ceiling or in floors any type of pipe complete all as specified and directed. |
| 29 | Supply and fixed in repairs Vitreous china wash down water closet pan(Syphonic type) (Pedestal pattern), white, excluding flushing cistern complete all as specified and directed. |
| 30 | Supply and fixed in repairs plastic water closet seat cover ,closed pattern with flat bottom and corner and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 31 | Supply and fixed in repairs flushing cistern 10 ltrs capacity PVC, syphonic action type, low level with inlet, ball valve ,float including bracket complete all as specified and directed. |
| 32 | S&Fixed in repairs flush pipes of PVC low level cistern for pedestal pattern WC including all joints complete all as specified and directed. |
| 33 | Supply and fixed in repairs WHB vitreous china wash basin, white, flat back excluding tap, waste pipe brackets size 550x400 mm complete all as specified and directed. |
| 34 | S&Fixed in repairs looking mirror 600x450 mm size Covered with aluminium frame with ply wood/black board/AC building board fixed with screw complete all as specified and directed. |
| 35 | S & Fixed in repairs PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed. |
| 36 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed. |
| 37 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed. |
| 38 | Supply and fix in repairs 15 mm bore pillar taps, Cast Copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 39 | S & F Brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union 15mm bore, fixed in repair complete all as specified and directed. |
| 40 | Supply and fix PVC (SWR) bends 75mm dia any radius complete all as specified and directed. |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing ,removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 42 | M&L Screed bed or bedding layer in cement mortar 1:4 15mm thick for laying floor finishes complete all as specified and directed. |
| 43 | S & F coloured ceramic tiles 7 to 8mm thk (square /Rectangular ) area of each tile exc 0.06 sqm and n.exc 0.11 sqm ,in floors etc set and jointed in neat cement slurry and pointed with white cement or pigment to match with the shade of the tiles complete all as specified and directed. |
| 44 | M/L 10mnm thick plastering in cement mortar 1:4 as backing coat for receiving finishes as skirting /dado complete all as specified and directed. |
| 45 | M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 46 | S & F 20 mm cast copper alloy screwed down high pressure with cruntch or butterfly handle screwed both ends for iron pipe or for fixed unions complete all as specified and directed. |
| 47 | S & F in repairs Angle stop valve cast copper alloy fancy type 15 mm bore screwed down high pressure, with crutch or butter fly handle screwed both ends for pipe or for unions complete all as specified and directed . |
| 48 | S&F in repairs 15 mm bore Bib tap cast copper alloy CP , fancy type chromium plated complete all as specified and directed . |
| 49 | S & F 20 mm ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or bass furrule and fixed complete all as specified and directed. |
| 50 | S&F 15 mm bore Bib tap cast copper alloy CP ,long body suitable for Kitchen sink fancy type chromium plated complete all as specified and directed. |
| 51 | S&F brass CP waste coupling 32 mm dia suitable for WHB & Sink fixed repairs complete all as specified and directed. |
| 52 | S&F Brass chromium platted 20mm dia towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 53 | S&F toilet paper holder CP brass fitted to wall as specified fixed repairs complete all as specified and directed. |
| 54 | S&F in repairs soap dish brass chromium plated fixed to walls/wall tile all as specified and directed |
| 55 | S & F 32 mm dia waste pipe suitable for WHB , Sink etc complete all as specified and directed. |
| 56 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 57 | S&F 500 ltr Rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part complete all as specified and directed. |
| 58 | Dismantling water tanks and removing to store exc 500 ltr and not exc 1000 ltr complete all as specified and directed. |
| 59 | Taking down cement plaster including existing roof treatment or fillets on roof surfaces and wall surfaces complete, racking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exc 250m and not exc 500m all as specified and as directed. |
| 60 | M&L for applying two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating on existing roof screed/plaster surface including equipments and supervision charges in following step by (i) Roof substrate must be pressure-washed with water with, a minimum working pressure of 1,400 psi is to be used to remove all dirt, dust, chalking and waste products, complying with standard specification and as directed by the Engineer-in-Charge. (ii) Inspect for cracks over roof screed, roof wall junction, water drain inlets/outlets if any, and clean and moisten them. Crack’s width should be wide up to 5-6 mm with mechanical cutting machine and Apply bond coat of SBR Latex in the ratio of 1:1 (URP 1: Cement 1) followed by groove should be filled with PMM by preparing Polymer modified mortar of CM 1:1 (Silica sand size ≤ 300 microns) admixed with SBR Latex at a dosage of 15% of cement.(iii) Providing 300mm x 300 mm Square / rectangle upstand of M20 grade concrete or with PMM around mechanical equipment like HVAC, air-conditioning, solar panels. Etc. Apply a coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating allow to cure for 3-4 hours and followed by apply two coats two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating reinforced with 45 Gsm glass fiber mesh or geo textile without dilution in the interval of 4 -6 hrs. Apply Hybrid PU Sealant at around the junction of fabricated stand inserted and wall mounting mechanical fixtures.(iv) Providing Minimum 50mm thick angle fillet with CM of 1:3 admixed with SBR Latex at a dosage of 12-15% of Cement and a bond coat of SBR Latex mixed with Cement at a ratio of 1:1. |
| 61 | item no 60 ctd....(v) Premix hybrid Polyurethane waterproof coating components A and B with an electric double paddle mixer stirrer for 2-3 minutes at a slow speed. The concrete surface must be brought into surface saturated dry condition (SSD). Providing and apply first coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating to the existing screed/plaster at a rate of 0.5Kg/sq.mt/coat. Place a 45-GSM glass fiber mesh or 200- 225 GSM raw mesh between the first and second coats while the first coat is still wet. Allow the first coat to dry for 3-4 hours. Apply the second and third coats of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 3-4 hours after application. Ensure that no void surface is left untreated or uncoated. All coats should be applied in directions perpendicular to each other, ensuring the correct consumption of material, resulting in a total dry film thickness of 1000 microns with system coverage in three undiluted coats at a rate of 1.50 Kg/ sq.mt/coat. Allow the system to air cure for 5-7 days minimum. The material should conform to the specified technical properties:a) Tensile Strength with Fiber ≥9N/mm2 as per ASTM D 2370b) Elongation at break ≥ 200% as per ASTM D 2370c) Crack bridging ability ≥ 3mm as per EN 1062-7-2004(A) d) solid content ≥55% as per ASTM D 1,644-2001e) Abrasion resistance 15mg confirming to ASTM D 4060f) Shore-A 65 as per ASTM D2240 g) Tear Resistance with Fiber 40N/mm as per ASTM D 624 complete all as specified and directed |
| 62 | item no 60 ctd....The waterproofing coating shall be applied over the entire horizontal surface and extended onto the vertical surface of the parapet wall, as per the manufacturer methodology complete all as specified and directedNote: All waterproofing work suggested above shall be carried out by the in house application wing of the manufacturer or skilled waterproofing contractor under the guidance of a technical expert from the manufacturer. The technical expert should audit the quality of the waterproofing work and submit the report. The contractor should submit the skilled project waterproofer certificate issued from the manufacturer while receiving the work order. |
| 63 | E/M WORKS |
| 64 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed |
| 65 | M&L for point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessories concealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 2 mm thick modular metal flush box and suitable modular white cover plate with frame etc all as specified and directed. |
| 66 | All as per item no 65 above but One light /bell / fan point controlled by one switch/bell push |
| 67 | All as per item no 65 above but One switch socket outlet 5 Amps on same board |
| 68 | All as per item no 65 above but One switch socket outlet 5 Amps on independent board |
| 69 | All as per item No 65 above but with copper conductor cable FRLSH 2.5 sqmm for one 3 pin socket outlet, 16 Amps concealed in wall/ ceiling and including provision of 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified and directed |
| 70 | M&L for submain wiring with 2 Runs 4 Sq mm for phase and neutral and 1 runs of 4 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and accessories and concealed in walls / ceiling all as specified including taking down old sub main wiring complete all as specified and directed |
| 71 | M&L for submain wiring with 4 Runs 6 Sq mm for phase and neutral and 1 runs of 6 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and accessories and concealed in walls / ceiling all as specified including taking down old sub main wiring complete all as specified and directed |
| 72 | Supply and fix Modular switch 1 way 6A 1 module |
| 73 | Supply and fix Modular socket 6A 2/3 pin combined 2 module |
| 74 | Supply and fix Modular switch 1way 16 A 1 module |
| 75 | Supply and fix Modular socket 6A /16A 2/3 pin combined 2module |
| 76 | Supply and fix Modular regulator , 120 w - 2 module |
| 77 | S&F Ceiling rose, surface bakelite, 65x50mm, two to three terminals AC,230 V complete all as specified and as directed |
| 78 | Supply and fix in replacement of new energy efficient LED batten 1 x 20 watts 4 feet batten type MCL LED type all prewired including connection with twin core flexible PVC 0.5 Sqmm complete all as specified and as directed. Make; Havells/Wipro/Crompton/Luker |
| 79 | Supply and fix LED batten 1 x 10watts 2 feet long powder coated white batten type all prewired including LED tube and connection with twin core flexible PVC 0.5 Sqmm complete all as specified and as directed. Make- Havells/Wipro/Crompton |
| 80 | Supply and fix in replacement of recess mounting LED warm white/warm light fittings 1 x 33 / 36 watts LED panel system efficiency 36 W LED 6500 K model suitable for fitting in false ceiling complete all as specified and directed. Make : Havells/Wipro/Crompton/Luker |
| 81 | Taking down unserviceable MCB distribution board, S & F SPN 12 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and as directed |
| 82 | Taking down unserviceable MCB distribution board, S & F TPN 8 way of any size and capacity double door with suitable busbar including space for fixing of MCCB 63 Amp disconnecting from mains and making good the disturbed surfaces complete all as specified and as directed |
| 83 | Supply and fix in replacement of MCB/RCCB 240V,50Hz,AC with rapturing capacity 10kA of the MCB SP 6A-32 A capacities all as specified and as directed. Make- Havells/Legrand/ABB. |
| 84 | All as per Item No 83 but SPN 32 AMP |
| 85 | All as per Item No 83 but RCCB 40 amps sensitivity 100mA |
| 86 | All as per Item No 83 but TPN 63 AMP |
| 87 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V,5 Star, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 88 | S&F Exhaust fan, steel body AC single phase 230 V of size 300mm sweep with blades and frame and louvers as specified and directed. |
| 89 | S&F in repairs Street light LED 50 watts complete with GI brackets not less than 1.2 Mtr made out of medium grade GI tubing complete all as specified and directed Make : Gold medal part no -GL90803 or Havells/Wipro/Crompton |
| 90 | Earth continuity conductor or main earthing lead fixed to wall on battan or recess or chases or buried in ground or drawn in conduit or pipe or fixed to a poles or any other indicated situation for loop earthing etc. As required 4 mm dia GI or steel wire complete all as specified and as directed . |
| 91 | Supply and lay cable XLPE insulated screened PVC bedded ,galvanized steel strip or armoured ,electric powerf cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core with necessary terminal lugs and glands etc complete all as specified and as directed |
| 92 | Removing excavated material not exc 50m and depositing where as directed at a level not exc 1.5m above the starting point complete all as specified and directed |
| 93 | M&L for providing sand cushioning for protection og UG Cable in trenches with dry(coarse) sand approved quality including filling, spreading and punning down to desired thickness complete all as specified and as directed. |
| 94 | Supply and lay in trenches common burnt clay bricks sub-class ‘B’ designation 75 for cable protection complete all as specified and directed |
| 95 | S&F Air termination, multi pointed copper rod 12mm dia and 300cm long complete all as specified and as directed |
| 96 | Supply and fix in repair copper strip, 20mm x 3.15mm, on wall ,roof or in trench as earth continuity conductor complete all as specified and as directed |
| 97 | Supply and fix in repair test terminal block, 75mm x 75mm x 25mm, made of gunmetal or phosphor bronze, drilled and tapped, including 3 nos. 8mm x 25mm long screws with head complete all as specified and as directed |
| 98 | Disconnecting and taking down the unserviceable earthing and M & L for Earthing complete with GI strip of capacity 25x4 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate to a depth not less than 1.5m below ground level, connected to and including GI wire 4mm dia with GI protection pipe 15mm dia light grade connected upto DBs by means of bolts, nuts, check nuts and washers made of copper, galvanized iron pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50mm thick with re-enforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50m, charcoal, lugs, common salt complete all as specified and as shown on plate No.3 of SSR Part-I complete all as specified and as directed |
| 99 | Supply and installation of Power coated Earth Boxes/testing point made of MS sheet with phosphor bronze Bus Bar. Earth box is fixed on nearby wall or MS stand. One earth box each will be connected to a dedicated earth electrode complete all as specified and as directed. |
| 100 | S & F in repair epoxy base insulators of suitable size 40 mm height for fixing earth strip on wall/ceiling /floor etc. including dismantling old insulators complete all as specified and as directed |
| 101 | Provision of entry/exit gate near 10 AFLU including closing of the existing gate, ramp to the new road and allied works at HQ SAC( AF), Trivandrum |
| 102 | B/R WORKS |
| 103 | Demolition of brickwork/block work or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 104 | Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 105 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 106 | Dismantling of existing barbed wire, complete all as specified and as directed |
| 107 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, plinth beams etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 108 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 109 | M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in foundation, under the plinth beam and as a coping including necessary formwork for sides complete all as specified and as directed. |
| 110 | M&L, for Reinforced cement concrete (design mix) RCC M-30 (using 20 mm graded stone aggregate ) in foundation footing , plinth beams, base of column , under reamed piles and mass concrete, complete all as specified and directed. |
| 111 | M&L Reinforced cement concrete (design mix) M-30 (using 20 mm graded stone aggregate ) Columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 112 | M&L Reinforced cement concrete (design mix) M-30 (using 20 mm graded stone aggregate ) in lintels, Beams, roof beam, cantilevers, bressumers, lintels over 1.5m span and roof slab etc,. complete all as specified and directed. |
| 113 | M&L Formwork to sides of concrete of rough finished flat surface to foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 114 | M&L Formwork to sides of concrete of rough finished flat surface Square, Circular, rectangular on plan or polygonal to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 115 | M&L, Form work to Rough finished surfaces of concrete lintels & roof beam, roof slab etc,. complete all as specified and directed. |
| 116 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed. |
| 117 | M&L for Mild steel TMT bars of dia 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed. |
| 118 | M&L for Pre-cast cement concrete block (PCC 1:3:6 Type C-1) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 119 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 120 | S&F rolled mild steel work as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 121 | S&F mild steel work as hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 122 | S&F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed. |
| 123 | S&F Galvanised steel punched type concertina coil 610mm dia(in stretched position) with no of circles 80 Nos of 200 clips with weight 7.5 to 8Kg/coil and recommended average coverage is 6Rm per coil, hot dipped galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with help of dove tail clips (18 SWG) fixed over barbed wire at points wherever coil touches the bottom of barbed wire with the help of hog rings (14 SWG) complete all as specified and as directed. |
| 124 | S&F of CNC cutting of Mild Steel (MS) sheet of thickness 2mm and it includes raw material, machine cutting charges, debarring, and delivery complete all as specified and directed. |
| 125 | Excavation over areas, n exc 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed. |
| 126 | M&L Laying and compacting 250 mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade II as specified Table 400-1 of Martha specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required. The materials are mechanically mixed, spread and levelling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of at least 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of Martha specifications for Road and Bridge works, 2013. All as specified and directed. |
| 127 | M&L for Laying and compacting 250mm thick laid in layers of not exceeding 75mm thick of each layer (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded agg and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to reqd gradient and camber complete all as specified and directed. The finished surface tolerance to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013. All as specified and directed. |
| 128 | Supply and spreading coarse aggregate from 12.5mm to 4.75mm not exc 25cm thick complete all as specified and directed. |
| 129 | S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment. complete all as specified and directed. |
| 130 | M & L Reinforced cement Concrete pipes NP 3 laid and jointed complete with collars 450 mm dia complete all as specified and directed. |
| 131 | M&L Concrete bed 1:3:6 using 40 mm graded stone aggregate to 450mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested inetc complete all as specified and directed. |
| 132 | Provision of toilets in MT Section Hangar at Unit HQ of 42 WEU(B) |
| 133 | B/R WORKS |
| 134 | M&L, for laying PCC 1:4:8 (40mm graded aggregate) type D-2 Cement concrete in foundations, filling and mass concrete complete all as specified and directed. |
| 135 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 136 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6, complete all as specified and directed. |
| 137 | M&L for rendering 10mm thick on fair faces of brick or concrete as in backing coat in CM 1:4 complete all as specified. |
| 138 | M&L for 25mm thick PCC type B0, 1:2:4, (12.5mm graded aggregate) as sub base complete all as specified and directed. |
| 139 | M&L for Hardcore of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface 75 mm (Broken stone or boulders) PP complete all as specified and as directed |
| 140 | M&L Reinforced cement concrete (design mix)M-30 (using 20 mm graded stone aggregate ) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 141 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick etc for fair finished surfaces, complete all as specified and directed. |
| 142 | M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed |
| 143 | M&L for preparation of new treated wall surface and applying two coats of acrylic emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 144 | M&L for rendering 5mm thick on fair face of brick work or concrete surface in CM 1:3 including finished the surface even and smooth with out using extra cement complete all as specified and directed. |
| 145 | M&L for preparing new plastered decorated surface of ceiling and applying one coat of white wash on ceiling all as specified and directed |
| 146 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed |
| 147 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 148 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ((Rate inclusive of Glass pane).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed |
| 149 | S & F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed. |
| 150 | S & F 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed. |
| 151 | S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodized, ISI marked complete all as specified and directed . |
| 152 | S & F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 153 | S&F 20mm bore pipe (LEAD FREE), Unplasticised PVC pipes of pressure rating 10 kgf/cm2, fixed complete to walls, ceilings or in floors etc., complete all as specified and directed. |
| 154 | S & F 110 mm bore PVC(SWR) bends of any radius etc, complete all as specified and directed . |
| 155 | M&L for applying 3mm wall care putty on wall surfaces, complete all as specified and directed. |
| 156 | S&F Health faucet CP Brass premium quality mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified. Health faucet with 1meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer), complete all as specified and directed.Make: Jaquar/CERA/Prayag |
| 157 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 158 | S&F Vitreous China wash basin, white, flat back, size 550x400 excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 159 | S&F plastic water closet seat cover, closed pattern with flat bottom seat cover, mild steel chromium pated or aluminised hinging device and colour as approved complete all as specified and directed. |
| 160 | S&F PTMT ball valve, high pressure, with polyethene float and fly nut complete, screwed for iron pipe of brass ferrule of 25mm dia bore complete all as specified and directed. |
| 161 | M&L, ATT for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed |
| 162 | M&L, ATT for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed |
| 163 | M&L, 75mm thick PCC 1:3:6 type-C-2 in plinth protection 40mm graded aggregate with necessary form work complete all as specified and as directed |
| 164 | S& F PVC(SWR) Vent cowl of 110mm dia complete all as specified and directed |
| 165 | S& F PVC(SWR) Vent cowl of 75mm dia complete all as specified and directed |
| 166 | S&F tank connector, PVC suitable for fixing to outlet pipe of any description and 32mm dia bore complete all as specified and directed. |
| 167 | S&F PVC gate valve with handle, fixed both end for PVC pipe of 32mm dia bore complete all as specified and directed. |
| 168 | S&F straight glass shelf made out of 5 mm thick glass graded with CP brass guards complete all as specified and directed . |
| 169 | M&L for provn of water proofing roof treatment to RCC roof with APP modified membrane with non woven polyester reinforced wt not less than 3 Kg/Sqm of thickness not less than 3 mm having thermal insulation with white mineral/ gravel finish on upper side of membrane uniformly embedded during manufacturing process . All as per following specifications:(a) The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimneystacks etc. and other similar situations to ease up about corners.(b) Bituminous primer conforming to IS : 3384-1965 oil bound bitumen primer @ 0.20kg per sqm and applying a coat blown grade hot bitumen 85/25 or 90/15 @ 1.20 kg/sqm to be applied an prepared surface till the surface is properly impregnated.(c) APP modified water proofing membrane as specified shall be laid on the primer surface by torch application method as per manufacturers instructions, The overlaps while torching shall be 100 mm in both directions(longitudinal and transverse directions). All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.(d) All joints & changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml per beg of cement and cured well before laying the membrane.(e) Apply one coat of solar reflective bituminous aluminium paint @ 100 gm per sqm over a coat of aluminium red oxide primer on the APP membrane, complete all as specified and directed. |
| 170 | E/M WORKS |
| 171 | M&L for cutting of hole on existing wall suitable size for fixing 250mm sweep exhaust fan and making good the disturbed surface incl plastering ,painting as per the existing colour all as specified and directed |
| 172 | S & F SPN 4 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and as directed. Make- Anchor/Havells/Legrand. |
| 173 | M&L for concealed/surface submain wiring in PVC conduit with two runs of 4 Sq mm and one run of 4 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded drawn through and including 25 mm dia PVC rigid conduit including accessories such as bends, supports etc complete all as specified and as directed |
| 174 | Supply and laying and testing of medium grade galvanised iron steel tubing of size 25mm dia bore, ISI marked, including GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tees, checknuts, caps, plugs etc complete laid in trenches/floors etc complete all as specified and directed. Make : Jindal/Tata/Prakash |
| 175 | S & F in replacement of Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe of size 20mm dia bore and conforming to IS 778 of 1984 complete all as specified and directed. Make : Leader/Kirloskar/Zoloto |
| 176 | M&L for 40mm GI joint coupling all as specified and directed |
| 177 | M&L for 25mm GI joint coupling all as specified and directed |
| 178 | PROVN OF WALL MOUNTED FAN & OTHER E/M WORKS AT RANGMANCH AT HQ SAC(U). |
| 179 | E/M WORKS |
| 180 | M&L for submain wiring in PVC conduit with two runs of 2.5 Sq mm and one run of 2.5 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded drawn through and including 25 mm dia PVC rigid conduit including accessories such as bends, supports etc complete all as specified and as directed |
| 181 | Supply and fix modular switch 1 way 6A 1 module in FRP junction box. |
| 182 | Supply and fix modular socket 6A 2/3 pin combined 2 module in FRP junction box complete all as specified and as directed |
| 183 | S & F Air circulator heavy duty 24 inch ( 600 MM sweep) Wall mounting fan, 240 volts AC, 50 HZ complete with fan motor , aluminium alloy blades, suitable capacity stand, air delivery 270 m3/min complete all as specified and as directed |
| 184 | Supply and fixing HOT moulded (FRP) junction box for street light pole with locking arrangement with IP 65 protection of inside size GSJB- 1414 250 x 250 x 155 mm ( inside dimension) concealed on wall complete all as specified and as directed. Make: Sintex or equivalent in Hansel |
| 185 | Supply and fixing 50 W flood light with a nominal efficiency >120 lumen/watt, having Pressure die-cast aluminium housing, toughened glass and individual LED's with secondary lens optics with 5700K, IP 66 complete all as specified and as directed. Make: Gold medal Part No GL9C0902550/ Havells/ Phillips |
| 186 | S & F SPN 12 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and as directed. Make- Anchor/Havells/Legrand. |
| 187 | M&L for earthing complete with GI earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to Galvanised Iron strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR Part-I connected to earthing test point all as specified or indicated complete with excavation & earth work, PCC pit in cement concrete 1:2:4 type B1 with 50mm thick RCC cover (grade M-15) having suitable handle (10mm MS Rod) 20mm dia GI medium grade watering pipe with GI funnel with wire mesh 40mm bore GI pipe (light grade) for protection of earth lead conductor complete all as specified and as directed |
| 188 | Provision of Cooling appliances in certain locations at HQ SAC |
| 189 | E/M WORKS |
| 190 | M&L for submain wiring in PVC conduit with two runs of 6 Sq mm and one run of 6 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded drawn through and including 25 mm dia PVC rigid conduit including accessories such as bends, supports etc complete all as specified and as directed |
| 191 | M& L for AC box modular socket type with MCB SP 20 amps 10 KA operating on 240 volts AC complete all as specified and as directed. Make : Havells 25 A DBOXX MCB Socket, DHDMCSN0251025 or Equivalent |
| 192 | S&F for 20 Amp miniature circuit breaker SP rating 240V, 10KA 'C' in the MCB existing DB complete with connection testing and commissioning complete all as specified and as directed. |
| 193 | Supply, fixing, installing & commissioning of Single door refrigerator, electric driven (single phase), capacity 195 LtrLitres .BEE 5 star rated, Note: 1 Year Comprehensive Warranty on the Product and compressor complete all as specified and as directed. |
| 194 | Supply and install testing, commissioning of Split AC with inverter type, Variable speed compressor which adjusts power depending on heat load, convertible / adjustable with 6-in-1 convertible type through remote control to operate in different tonnages for different cooling needs, comprising of indoor unit with dust Filter, Anti-bacterial Filter & outdoor unit with Copper Condenser Coil, single phase 230V, 50Hz complete with cordless remote control unit of high EER rated BLDC compressor, including inter connection cable of suitable size, necessary fixing arrangement complete unit shall be placed at suitable position and height inside the room and outdoor unit at suitable place outside the room on plinth height / on wall or roof as suitable and including voltage stabilizer of suitable capacity, metallic bracket with fixing bolts for outdoor unit, insulated copper piping etc., Refrigerant R410-A/R32 of capacity 1.5 TR (copper type) 5 star rated complete all as specified and directed. Note: 1 Year Comprehensive Warranty on the Product and 10 Years on Compressor complete all as specified and as directed Make : Hitachi or its Equivalent. |
| 195 | Supply and install testing, commissioning of Split AC with inverter type, Variable speed compressor which adjusts power depending on heat load, convertible / adjustable with 6-in-1 convertible type through remote control to operate in different tonnages for different cooling needs, comprising of indoor unit with dust Filter, Anti-bacterial Filter & outdoor unit with Copper Condenser Coil, single phase 230V, 50Hz complete with cordless remote control unit of high EER rated BLDC compressor, including inter connection cable of suitable size, necessary fixing arrangement complete unit shall be placed at suitable position and height inside the room and outdoor unit at suitable place outside the room on plinth height / on wall or roof as suitable and including voltage stabilizer of suitable capacity, metallic bracket with fixing bolts for outdoor unit, insulated copper piping etc., Refrigerant R410-A/R32 of capacity 2.0 TR (copper type) 5 star rated complete all as specified and directed. Note: 1 Year Comprehensive Warranty on the Product and 10 Years on Compressor Make : Llyod or its Equivalent. |
| 196 | Provision of Flame proof air conditioners and allied works for unit armoury HQ SAC(U) |
| 197 | E/M WORKS |
| 198 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire complete all as specified and as directed |
| 199 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required complete all as specified and as directed. |
| 200 | Supply and install testing, commissioning of Flame proof 2.0 Ton Split AC with inverter type, Variable speed compressor which adjusts power depending on heat load, convertible/adjustable through remote control to operate in different tonnages for different cooling needs, comprising of indoor unit with Blower Non sparkable type & outdoor unit with Copper tube aluminium fins MOC GI body , single phase 230V, 50Hz fan motor rating 0.25 HP ,920 RPM heat Exchanger copper tube Aluminium fins filter Removal and washable including inter connection cable of suitable size, necessary fixing arrangement complete unit shall be placed at suitable position and height inside the room and outdoor unit at suitable place outside the room on plinth height / on wall or roof as suitable and metallic bracket with fixing bolts for outdoor unit, insulated copper piping etc., Refrigerant R-407 (NON CFC) of capacity 2.0TR complete all as specified and directed. Make -Code SSPL/HC/508 and equivalentNote: 1 Year Comprehensive Warranty on the Product, Note : Air conditioning units such as copper pipes of suitable size with insulation between indoor/outdoor, Darin pipes, copper nuts/bolts, installation stands, shall be installed exclusively by authorized company personnel, and the contractor shall facilitate the installation process |
| 201 | Supply and fixing of FLP Enclosure for voltage stablizer 5 KVA ,230 V (Indication lamp -01 nos ) suitable for flame proof AC Capacity 2.0 ton complete all as specified and directed. Make , Code- SSPL /RCP /109 and equivlent Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender