Tender For Special Repair To Bldg No P-18 & Provision Of Surgical Sink Station At 150 Gh And Provision Of Gate No 2 Near Butchery Post At 223 Coy Asc (Sup) Under Age B/R Dett-Iii Of Ge 862 Ews
Tender Value
40.13 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
20 days left
EMD
80300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-18 & Provision Of Surgical Sink Station At 150 Gh And Provision Of Gate No 2 Near Butchery Post At 223 Coy Asc (Sup) Under Age B/R Dett-Iii Of Ge 862 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part-I (B/R Works)Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4.0 sqm each, complete all as specified and directed. |
| 2 | Taking down chowkhats or frames area not exceeding 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 3 | Taking down shutter of any description exceeding1 sqm and not exceeding 2 sqm each complete all as specified and directed. |
| 4 | Demolition of cement concrete not exceeding 15cm thick above or below ground level complete all as specified and directed. |
| 5 | Demolition of cement Concrete of any description and in any position not otherwises specifically provided for complete all as specified and directed. |
| 6 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 7 | Dismantling of boards of any description and fixed in any position with nails complete all as specified and directed. |
| 8 | Taking down cement or cement plaster of any description on any type of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 9 | Dismantling of water tank of capacity 500 to 1000 ltr complete all as specified and directed. |
| 10 | Taking up or down 15 mm bore steel tubing and connections, including cleaning, re-fixing or removal to store complete all as specified and directed. |
| 11 | Taking up or down 20 mm bore steel tubing and connections, including cleaning, re-fixing or removal to store complete all as specified and directed. |
| 12 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed. |
| 13 | Cutting chases,pinning in, making good to facing on brick wall where required and pointing in CM 1:3 to end or edges of landings,steps,cill,shelves,lintel etc and cutting chases for concealed water tubing or concealed conduite wiring etc and making good ,cutting not exceeding 10 cm girth. complete all as specified and directed. |
| 14 | Supply and laying of 22.20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 15 | Supply and laying of 28.50 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 16 | Supply and laying of 20 mm outer dia CPVC tank adopter complete all as specified and directed. |
| 17 | M&L for 25mm thick cement concrete type B0 1:2:4 (using 12.5mm graded stone aggeregate) as in levelling coarse/ roof padding including filling of depressions and maintaining required slop including coved fillets,finished the surface even and smoth without using extra cement, complete all as specified and directed. |
| 18 | M&L for 10 mm thick rendering on fair faces of stone /concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement with water proofing complete all as specified. Note:- Water Proofing Compound shall be measured & paid separately. |
| 19 | Supply only liquid water proofing compound confirming to IS complete all as specified and directed. |
| 20 | M&L for taking down/dismantling of existing roof treatment of any description such as old APP membrane roof treatment etc terracing including screed bed etc. hessian base felt/tar felt etc(any type andthickness) complete all as specified and directedNote-: The same shall be removed from the site. |
| 21 | M&L for roof surface treated with PU Elastoseal primer to seal the pores and enhance the adhesive of the coating, supply and applying single component water proofing liquid membrane based on pure, elastomatric, polythine resin cold applied of spray/brush, applied membrane with an elongation of 650%+50 and tensile strength not less than 2 Mpa. crack bridging ability not less than 2mm. No leakage upto 5 bars of water pressure. Shore Hardness> 50 Shore. The minimum thickness to be applied shall be 1.5mm(overall) in two layers(each layer 750micron) or as per manufacture instructions so as to achieve thickness not less than 1.5mm including providing & laying of protective Geotextile fabric 150 GSM over than entire membrane with proper overlaps of 75mm complete all as specified and directed. Note : (i) The treatment shall be carried out by authorised applicator of manufacture approved by GE.(ii) Payment will be made after providing warranty certified from the company. (iii) Roof treatment colour shall be in black/grey. |
| 22 | M&L for Rendering 10mm thick on fair faces of brick/stone work or concrete surface in CM (1:6) as in wall, finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for Rendering 15mm thick on fair faces of brick/stone work or concrete surface in CM (1:4) as of wall mixed with WPC , finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for Rendering 5mm thick as in ceiling on concrete surface in CM (1:3)as finished even and smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for two coats of white wash as ceiling surface including preparation of newly pastered surface complete all as specified and directed. |
| 26 | M&L for one coat of white wash on ceiling surface including preparation of old decorated surface complete all as specified and directed. |
| 27 | M&L for preparation of newly plastered surface of wall with Acrylic Smooth exterior paint of required shade Two or more colour and pattern : New work (Two or morecoat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 28 | M&L for preparation of newly plastered surface of wall including cornices applying two coats of distemper oil emulsion paint over a coat of 1mm thick wall care putty, complete all as specified and directed. |
| 29 | M&L for Complete removal of existing teatment of wall surfaces including cornices applying two coats of distemper oil emulsion paint over a coat of 1mm thick wall care putty, complete all as speicied and directed. |
| 30 | M&L for Non skid ceramic coloured tiles of size 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 31 | M&L for Non skid ceramic coloured tiles of size 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick rendering in CM(1:4) complete all as specified and directed. |
| 32 | M&L for glazed ceramic tiles of size 450 mm x 350 mm x 7mm thick coloured on vertical surfaces as dado/skirting set, jointed and pointed in net cement slurry and pointed in white cement mixed with colour pigments to match the existing surface over and including 10 mm thick backing coat in CM(1:4) complete all as specified and directed. |
| 33 | M&L for Non skid ceramic coloured tiles of size 7 to 8 mm thick (Square or Rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 34 | M&L for granite work 16-18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 20 mm thick screed bed in Cement mortar 1:4.including dismantling of old granite work, complete all as specified and directed. |
| 35 | M&L for machine cut kota stone slab flooring of 18-20mm thick over and inlcuidng 15 mm thick screed bed in CM(1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab incurring rubbing and polishing including, rounding/ moulding of edges complete all as specified and as directed. |
| 36 | M&L for machine cut kota stone slab as raiser/dado/skirting 18-20mm thick over and including 10 mm thick backing coat in CM(1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab incurring rubbing and polishing including, rounding/moulding of edges complete all as specified and as directed. |
| 37 | M&L for cement concrete type E2 1:5:10 (using 40mm graded thick stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. |
| 38 | Cutting holes into or through brick/Block walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required not exceeding surface area 150 sqcm complete all as specified and directed. |
| 39 | S&F 50mm bore GI pipe light grade as in spout complete all as specified and directed. |
| 40 | S&F 40 mm dia cupboard knobs fix with nut screw and washer of brass polished complete all as specified and directed. |
| 41 | S&F 100 mm long Hasp and staple, brass with mild steel, wire type, stove enamelled black,safety type including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 42 | S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed. |
| 43 | S&F powder coated aluminium frame for doors, window, ventilators with one or more rebates including joining cleats complete all as specified and directed. |
| 44 | S&F Powder coated aluminium grill (powder coated or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and peration of handles and fixing approved anodised aluminium standard section around the pening, complete all as specified and directed. |
| 45 | Supply only 3 mm thick plain sheet glass.,ordinary quality,not exceeding 0.50sqm each pane complete all as specified and directed. |
| 46 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 47 | S&F factory made double rebated extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note:- (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 48 | M&L for factory made 30mm thick 100% Solid WPC Laminated Moulded Flush Door Shutter of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibres ( Wood Powder/Rice Husk/Wheat husk) and Non toxic additive, made from Extrusion process WPC foam sheet Single Extruded (inner) with having minimum density not less than 650 Kg/cbm manufactured an ISO 9001-2015 Certified Company,having good screw holding capacity ( Screw Withdrawl Strength of 2000N(face) & 1100N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof & Fire retardant. WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted on both faces of shutter & Fixing Stainless Steel Butt Hinges of required size with necessary full body threaded star headed counter sunk SS Screws. complete all as specified and directed.Note-: Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 49 | M&L for factory made 30mm thick wire mesh solid PVC door shutter consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mmx 15mm for top, lock and bottom rails. MS frames shall have a coat of metal primer of approved make and manufacturer 19mm x 19mm MS square tubes shall be covered with heat molded plain sheets channel made from 5mm (0.25 tolerance) thick PVC sheet of density 600Kg/CBM manufactured by an ISO 90012015 certified company of size 30mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90 degree on either side forming stiles, one of the 90 degree bend is cut from stiles as well as rails to nail from inner side of door to hide wire mesh fixing steel screws, 5mm(0.25 tolerance) thick 140mm wide PVC sheet out of which 125 mm shall be flat and 15mm shall be bent in 90 degree on the inner side to form top and bottom rail and 155mm wide PVC sheet out of which 125mm shall be flat and 15mm shall be bend in 90 degree on both side to form lock rail.An additional 5mm (0.25 tolerance) thick PVC strip of 20mm width is to be struck on the interior side of the C-channel using PVC solvent cement adhesive. Panel will be of GI/SS wire mess of 24 gauge to be fitted inside area of stiles and rails. The wire mess in top, bottom and lock rail is sealed with 15mm x 15mm tube with steel screw of size 13 x 6mm, 10mm (5mm x 2Nos) thick PVC strip of 25mm width is to be struck and nails on both side of GI wire mess interior at the top, bottom and lock rail. 10mm thick (5mm x 2 Nos) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail door to be fixed to frame with 3 Nos MS powder coated butt hinge size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the wall of the MS tube. Other hardwares should be fixed with 19 x 6mm size steel screw etc. complete all as specified and directed. |
| 50 | S&F factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note-: (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 51 | M&L for PVC solid 18mm thick coloured sheet or Cupboard shutters and shelves one side decorative laminated & other side balancing lamination sheet consisting of brackets SS screws etc. The panel shall be fabricated using adhesive and screws where ever required.All the edges shall be covered with 2mm thick edge bonding tape complete all as specified and directed. |
| 52 | S&F factory made solid panel PVC moulded door shutter with wood free EPS 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 53 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 54 | S&F 125 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 55 | S&F 200 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 56 | S&F 100 mm long extruded B-22, aluminium alloy Butt hinges complete all as specified and directed. |
| 57 | S&F 75 mm long extruded C-21, aluminium alloy Butt hinges complete all as specified and directed. |
| 58 | S&F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 59 | S&F in repair 20 mm Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 60 | S&F Rotational moulded polyethlene double layered water storage tank 500 litres capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. |
| 61 | S&F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed 20 mm dia complete all as specified and directed. |
| 62 | S&F in repair 100 mm cast iron floor trap with grating including jointing to waste pipe fixed in PCC type B-1 (1:2:4), complete all as specified and directed. |
| 63 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 64 | S&F in repair Stop Valves (concealed type) 15mm Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed. |
| 65 | S&F in repair Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, screwed down high pressure screwed for iron pipes complete all as specified and directed. |
| 66 | S&F in repair PVC connection pipe 15mm dia with PTMT nuts of length 600mm complete all as specified and directed. |
| 67 | S&F in repair Angle cock 15mm Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed. |
| 68 | S&F in repair Bib Tap 15 mm bore single lever type cast copper alloy Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes complete all as specified and directed. |
| 69 | S&F in repair 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed. |
| 70 | S&F in repair sink with drainage board made of stainless steel 0.8 mm thick kitchen or laboratory with plugs, including washers and waste pipe; and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 71 | S&F in repair wash basins of size 550x400mm, vitreous china (flat back or angle back type) any size, including waste pipe cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 72 | S&F in repair Hot & Cold Mixer 15mm dia Chromium plated Fancy type for WHB/wall mixture sink, complete all as specified and directed. |
| 73 | S&F in repair Vitreous China squatting pan of pattern“long pan”, size 580 mm white with ‘P’ or‘S” trap, front or back inlet and foot restsany pattern excluding flushing cisternand flush pipe complete all as specified and directed. |
| 74 | S&F in repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including flush pipe, brackets complete all as specified and directed. |
| 75 | S&F in repair brass CP shower rose of size 125mm/200 mm with swivel joints fixing to steel pipe complete all as specified and directed. |
| 76 | S&F in repair 600 x 450 mm bevelled edge mirrior of selected quality glass mounted on 6mm AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 77 | S&F in repair brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated brackek complete all as specified and directed. |
| 78 | S&F in repair Sheet front glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 79 | S&F in repair Stainless steel Plate rack 0.5 mm thick of size 750x750x250mm of standard quality and shape complete all as specified and directed. |
| 80 | S&F in repair for Curtain Rod of Aluminium alloy 25 mm dia fancy type complete and hanging hooks/brackets / end caps complete all as specified and directed. |
| 81 | S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors,walls with steel clamps complete all as specified and directed. |
| 82 | S&F in repair PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors with steel clamps complete all as specified and directed. |
| 83 | S&F in repair 110 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed. |
| 84 | S&F in repair 75 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed. |
| 85 | M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 86 | Preparation of New steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 87 | Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 88 | M&L for Cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) 75 mm thick as in plinth protection, laid in slope 1:12 from outer edge of the wall finished even and and fair w/o using extra cement ,laid in alternate bays including providing 6 mm wide joints through out the thickness of plinth protection in concrete bays and in between walling and plinth protection,joint filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight) complete all as specified and directed. |
| 89 | Demolition of Brick/stone work built in cement mortar of any descrption incl all necessary quions arches piilars etc complete all as specified and directed. |
| 90 | M&L for brick work in cement mortar (1:6) using old size sub class 'B' bricks in walling, straight or curved on plan exceeding 6m mean radius complete all as specified and directed. |
| 91 | Excavation in all kind of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed. |
| 92 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations filling and mass concrete etc, complete all as specified and directed. |
| 93 | M&L for reinforcement cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) in foundation, including rafts, footings, foundation beams; plinth beams, base for column, etc under piles and mass concrete complete all as specified and directed. |
| 94 | M&L for reinforcement cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 95 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc for rough finished surfaces of concrete etc. complete all as specified and directed. |
| 96 | Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions (rough finished) complete all as specified and directed. |
| 97 | M&L for mild steel TMT bars 10mm dia or above, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip etc.complete all as specified and directed. |
| 98 | All as per Item No 97.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups spacers and binder etc. |
| 99 | S&F 3.15 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angle etc.complete all as specified and directed. |
| 100 | Dismantling of posts or struts(wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground, complete all as specified and directed. |
| 101 | Dismantling of fencing wire mesh any type complete all as specified and directed. |
| 102 | Returning & filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in loose/soft soil complete all as specified and directed. |
| 103 | Removing the excavated soil to a distance exc 250mtr but not exceeding 500mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified |
| 104 | S&F stainless steel 3D alphabet /Digit of size 8 inch x 8 inch on sides of entrance gate, fixed with adhesive, complete all as specified and directed. |
| 105 | M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations filling and mass concrete etc, complete all as specfied and directed. |
| 106 | M&L for Reinforced concrete pipe,class NP3 450 mm bore of pipe laid and jointed with collars complete all as specified and directed. |
| 107 | M&L for Pre-cast cement concrete block masonry type C-1 (1:3:6) (using 20 mm graded stone aggregate) with solid blocks set in CM 1:6, exceeding 10 cm in width and setting in mortar, complete all as specified and directed. |
| 108 | Earth work in excavation any kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed. |
| 109 | Rolling and consolidating formation surfaces in cutting with power roller Exc 8 tonne but not exceeding 12 tonne complete all as specified and directed. |
| 110 | Laying and compacting 150 mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade-I as specified Table 400-1 of MARTH specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with natura sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber with finished surface tolerances as per Table 900-1 of MARTH specifications for Road and Bridge works, 2013, complete all as specified and directed. |
| 111 | Laying and compacting 150 mm thick (compacted thickness ) WMM laid in two layers of 75 mm each Wet Mix Macadam (WMM) grading as per table 400-13 of MARTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradien and camber. The finished surface tolerances to be as per Table 900-1 of MARTH specifications for Road and Bridge works 2013, complete all as specified and directed. |
| 112 | Providing and Laying Dry lean Concrete (DLC) 150 mm thick of aggregate gradation as per Table 1 of SP 49:2014 having 7 day average compressive strength not less than 7 MPa Minimum cemen content not less than 140 Kg/Cum DLC mixed in Batching Plant, transported to site and laid by electronic sensor paver including spreading and compacting usign high amplitude tamping bars o paver (initial compaction) further by double drum smooth wheeled vibratory rollers with 80-100 KN static weight to achieve minimum dry density not less than 98% of maximum Dry Density, necessary finishing etc, and tolerances to be as per Table 900-1 of MARTH specifications of Road and Bridge work 2013, complete all as specified and directed. |
| 113 | Supplying and laying of 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm over sand cushion as specified in the design with overlap between adjacent strips and a transverse joints as minimum 300mm,complete all as specified and directed.Note-: No additionaI amount shall be paid for overlap. |
| 114 | M&L for 10 mm thick sand cushion with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness laid over DLC layer complete all as specified and directed. |
| 115 | M&L for Pavement Quality Concrete(PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15 2017, coarse aggregate of clean, hard strong, dense non-porous and durable pieces of crushed stone gravel, fine aggregates of clean natural sand crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by Texturing cum Curing Machine. Required surface texturing to be done as specified in Clause 10 1 14 and Tabl~ 9 of IRC' 15-2017 ,complete all as specified and directed. |
| 116 | Cutting of construction joints 25 mm deep and 10 mm wide by early entry saw cut using diamond bit cutter of appropriate size, straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant. Placing of closed cell medium density, crossed linked polyethylene foam backup rod of 12 mm dia, application of bond breake tape on top of back up rod for complete width of the joint and filled with polyurethane based sealan complying with BS-5212, BS 4254 and EN- 141875 2003 with minimum movement ccommodation factor (MAF) of +I- 30% having minimum 10 year performance guarantee, applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacturer, complete all as specified and directed. |
| 117 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), making drainage opening wherever required, complete all as specified and directed. |
| 118 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint on surfaces of walls, complete all as specified and directed. |
| 119 | Supply, Installation & Commissioning of of single - station Surgical scrub staion (3 Bay) basin fabricated from Type 304 stainless steel (1.2mm/18 gauge thickness) with a smooth finish; both foot-operated & sensor-activated faucet for hands-free use; a connected, sensor-activated soap dispenser; and an option for hot and cold water mixing with following specifications:-(a) Material. The entire station is typically made from type 304 stainless steel, which is highly corrosion-resistant and suitable for medical environment.(b) Construction. The basin is often seamless and welded for strength, then polished to a matt finish to reduce glare and ensure hygiene. (c) Faucet Operation. To maintain sterility, the faucet is operated pedal, A common hands-free alternative and infrared sensor: for ultimate touch-free operation.(d) Water Control. Thermostatic mixing valve, which blends hot and cold water to a preset temperature and can prevent thermal shock.(e) Soap Dispenser. Intergrated sensor-activated dispensers dispense liquid soap, ensuring hands remain clea.(f) Design. Floor-mounted: providing a sturdy, standalone unit.(g) Dimensions. Standard size with deep tub and a backsplash to prevent splashing as approved by GE.Make: ISI Marked as approved by GE. |
| 120 | M&L for PCC type B-0,(25 mm thick),1:2:4 (using 12.5 mm graded stone aggregate) in sub base, complete all as specified and directed. |
| 121 | M&L for Non - skid (coloured) Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed (1;6 CM) complete all as specified and directed. |
| 122 | Supplying and laying of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed. |
| 123 | Schedule 'A' Part-II (E/M Works)Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications complete all as specified and directed. |
| 124 | M&L for Point wiring for one light point/fan point / One bell/ buzzer point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core cable (green color) as earth lead and including Conduit medium grade with all fitting (ISI Marked) along with along with modular PVC boxes of reqd size with modular white cover plate with frame including cutting chases to wall making good the disturbed surfaces to match with the existing specification, complete all as specified and directed. |
| 125 | all as per item No 124.00 here-in-before but for socket out 5 Amps on same board. |
| 126 | All as per item No.124.00 here-in-before but for socket outlet 5 Amps on independent board. |
| 127 | All as per Item No.124.00 here-in-before but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead. |
| 128 | S&F modular switch piano, 1 module, single pole one way 6Amp, complete all as specified and directed. |
| 129 | S&F modular switch piano, 1 module, single pole one way 16Amp, complete all as specified and directed. |
| 130 | S&F modular socket 2/3 pin, 2 module, 6A, ISI marked, 230 volts, complete all as specified and directed. |
| 131 | S&F modular socket 6/16A, 6 pin, 2 module, ISI marked, 230 Volts, complete all as specified and directed. |
| 132 | S&F modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed. |
| 133 | S&F modular bell push, flush type, 5Amp shall confirm to IS-3854 of 1998, 240V complete all as specified and directed. |
| 134 | S&F in replacement of bell, ding dong AC 230 Volts, single pole complete all as specified and directed. |
| 135 | S&F ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm, complete all as specified and directed. |
| 136 | M&L in replacement for LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm, complete all as specified and directed. |
| 137 | S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 138 | S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as sepecified and directed. |
| 139 | Taking out unserviceable ceiling fan and deposit to MES Store, supply and fix new ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as specified and directed. |
| 140 | M&L in replacement for metal exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 300mm sweep having power, speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. |
| 141 | S&F MCB DB TPN 4 way with 200 amps rated busbar 415 V double Door confirming to IP 43-IK complete with din rail,Neutral and earthing bar complete all as sepecified and directed. |
| 142 | S&F minature circuit breaker(MCB) TPN 63 amp,415V, 10KA 'B' curve in the DB complete with connection testing and commissioning complete all as sepecified and directed. |
| 143 | M&L in replacement for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-42 protection single phase 240 volts 6 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, all as specified and directed. Note:- MCBs shall be measured separately. |
| 144 | M&L for MCB single pole and neutral 240 volts any rating upto 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables,including removing old and unservicable complete all as specified and directed. |
| 145 | S&F miniature circuit breaker (MCB) SP, 5 to 32 Amp, 240V, 10KA 'B' curve in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 146 | M&L in replacement for sub main wiring with two single core PVC insulated unsheathed, FRLSH flexible copper conductor cable of size 6 sqmm and one single core unsheathed, , FRLSH flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including PVC casing caping/ non metallic rigid PVC conduit medium grade and making good the disturbed wall surfaces to match with existing specification all as required at site, complete all as specified and directed. |
| 147 | S&F in replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 148 | Supplying, laying and testing cable XLPE Insulatedn screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sq mm 3.5 core complete all as sepecified and directed. |
| 149 | M&L for double wall cvorrugated pipe (DWC) of 40mm dia confirming to IS:16205 Part-24 and IEC 61386 (Part-24) for cable protection of cable under/above ground surface complete all as sepecified and directed. |
| 150 | M&L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including GI pipe 15 mm dia light grade for protection to the extend of 7.5 mtr as earthing lead connecting to equipment with provn charcol and salt complete including PCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender