Tender For Addition/Alteration And Special Repairs To Perimeter Chainlink Fencing At Cad Pulgaon
Tender Value
3.52 Crore
Estimated cost
Bid Submission
29 Sep 2026
19 days left
EMD
4.27 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration And Special Repairs To Perimeter Chainlink Fencing At Cad Pulgaon
BOQ
| Sl. No. | Item Description |
| 1 | Note: (i) Please refer schedule 'A' notes before quoting the tender. (ii) Amount of Schedule of credit shall be deducted off line by the department. |
| 2 | Dismantling of post or struts (wood, steel, PCC or RCC) embeded in concrete of any section, including taking out embeded portion and making good disturbed ground complete all as specified and as directed. |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and as directed. |
| 4 | M&L PCC 1:2:4 type B2 (using 40 mm graded aggregade ) in foundation filling and mass concrete for post holes complete all as specified and as directed. |
| 5 | Material and labour for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed. |
| 6 | Material and labour for mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders binding with MS wire complete all as specified and as directed. |
| 7 | M & L for mild steel angle, flat work and other steel Sections as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 8 | S&F galvanised 2 strand, steel barbed wire 2.2 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing and straining and fixing complete all as specified and as directed. |
| 9 | S&F Mild steel screw bolts (machine made) 11 mm to 15 mm dia exceeding 5cm & n exc 10cm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and as directed. |
| 10 | M & L for preparing new or previously untreated of steel and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm in width or girth complete all as specified and as directed. |
| 11 | Supply MS galvanised chain link fencing with exc 3mm dia wire of 50 x 50 mesh size complete all as specified and as directed. |
| 12 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. |
| 13 | M&L mild steel Round bars 10 mm dia and over cut to length, bend to shape required, incl cranking bending spirally for hooking for column, hooking ends and binding with 0.9 mm dia annealed wire confirming to ISI complete all as specified and as directed. |
| 14 | Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out in soft and disintegrated rock complete all as specified and as directed. |
| 15 | Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 16 | M & L for PCC type D2 1:4:8 (40mm graded Aggr) in foundations, filling and mass Concrete complete all as specified and as directed. |
| 17 | M & L for reinforced Cement Concrete Type M-25 using 20 mm graded granite stone aggregate) in foundations including rafts, footings, raft beam, plinth beams and mass concrete complete all as specified and as directed. |
| 18 | M & L for reinforced Cement Concrete type M-25 using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts complete all as specified and as directed. |
| 19 | M&L for use & waste of rough finished flat Form work to sides of concrete foundations rafts, footing, base of columns, raft and raft beams, sides & soffits of foundation (if any) of foundation and plinth beams and similar work complete all as specified and as directed. |
| 20 | Use & waste of rough finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and as directed. |
| 21 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed. |
| 22 | M&L for raised pointing to randon rubble uncoursed or brought coursed in CM 1:4 complete all as specified and as directed. |
| 23 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 24 | M/L hardcore of guage exc 63mm but n. exc 100mm, deposited, spread & leveled in layers n. exc 15cm thick, watered & rolled/ rammed to a true surface complete all as specified and directed. |
| 25 | M/L for providing cement concrete type B1 (1:2:4) using 20mm agg as in coping complete all as specified and as directed. |
| 26 | Returnng, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and as directed. |
| 27 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m all as specified and directed |
| 28 | M&L for two coats of cement base paint over newly plaster/concrete surfaces of wall any description of of plastered surface incl priming coat all as specified and directed as per manufactures instructions. |
| 29 | Material and labour for rendering 10mm thick internal surfaces in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement all as specified and as directed. |
| 30 | Demolition of RCC of any description and in any position not otherwise specifically provided Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender