Tender For 1. Construction Of Mini Community Sanitary Complex (Mini Community Sanitary Complex - Type 1 - Common) At Pups Karupalli Village Head Of Muthali. Estimate Amount: 592000/-
Tender Value
5.92 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
10 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Krishnagiri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 1. Construction Of Mini Community Sanitary Complex (Mini Community Sanitary Complex - Type 1 - Common) At Pups Karupalli Village Head Of Muthali. Estimate Amount: 592000/-
BOQ
| Sl. No. | Item Description |
| 1 | 1. Construction of Mini CSC (Mini CSC – Type 1 – Common) at Pups Karupalli Village H/O Muthali. Estimate Amount: 592000/- |
| 2 | Earthwork excavation and depositing on bank with an initial lead lift in hard gravelly soil for foundation etc., complete. |
| 3 | PLAIN CEMENT CONCRETE 1:4:8 mix using 40mm Iss metal including all cost and conveyance of all materials to site and all labour charges etc complete. |
| 4 | Refilling in foundation and basement with excavated earth in layer of not more than 15cm thick |
| 5 | Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 6 | Supplying and filling with brick jelly 40mm complete complying with standard specification and as directed by the departmental officers. |
| 7 | Random Rubble Masonry in cement Mortar 1 : 5 for foundation and basement using New Stones including necessary provision for Bond stones with simultaneous flush pointing with the same mortar above ground level complying with standard specifications. |
| 8 | Brick work in cm 1:5 mix using contry bricks including cost and conveyance of all materials to site and labour charges etc completed. |
| 9 | Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed. |
| 10 | Plinth Beam |
| 11 | Lintel |
| 12 | Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs |
| 13 | Supplying and Fabrication of Steel for RCC works including all cost of cutting bending and tying of steels and kept ready for concrete in position etc., |
| 14 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be throughly cleaned out of dust and scrubbing, the surface then be allowed to dry for atleast 48 hours. Then shall be sand papered to give a smooth and even surface. Any unevenness shall be made good by 1st coat of putty mixed with water on entire surface. the putty should be got approved by the executive Engineer before use on work. |
| 15 | Plastering with CM 1:5 mix to 12 mm thick including cost and conveyance and all labour charges etc., |
| 16 | Paving the top of roof with solar reflective ceramic tiles of size 305X305X7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and Three M.sand) 12mm thick and pointed with tile grout (nitotile Grout or Equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed. |
| 17 | Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) ) in CM 1:3, 20mm thick. |
| 18 | Dadooing walls with Colour Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with |
| 19 | Plastering with CM 1:4, 20mm thick mixed with water proofing compound confirming to BIS at 2% by weight of Cement used including finishing, curing etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 20 | Distembering two coats with best approved oil bound distember including cost of painting priming coat over new plastered surface and conveyance of all materials to site and all labour charges |
| 21 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 22 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with standard specification and as directed by the departmental officers. |
| 23 | Supply and Fixing in position Indian Water Closet(IWC) Oriya Type. |
| 24 | Supply and Fixing in position Europeon Water Closet (EWC) |
| 25 | Cost and supply of wood plastic composit door & supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mmX 40mmX 6mm with MS flat 25mm X 25mmX 6mm and MS Sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. |
| 26 | Wood plastic composit door rate as per model communicated |
| 27 | Door SD 1.20m X 2.10m |
| 28 | Supply and fixing of MS Grill over Door |
| 29 | Sanitary Arrangements |
| 30 | 110mm dia PVC Pipe |
| 31 | 110mm PVC Door Bend |
| 32 | 110mm PVC Tee |
| 33 | Water Supply Arrangements |
| 34 | 2000 lit HDPE tank |
| 35 | 32mm PVC Pipe |
| 36 | 32mm PVC Bend |
| 37 | 32mm PVC Tee |
| 38 | Brass Chromium plated screw down tap 15/12mm dia (Heavy type) |
| 39 | RCC Jolly (0.60X0.45) |
| 40 | Rainwater pipe |
| 41 | Electrical Arrangements |
| 42 | Open light point/ Fan point SD20 |
| 43 | CFL SD80 |
| 44 | Towards Photographic charges |
| 45 | Towards Name Board Charges |
| 46 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender