Tender For Construction Of Anganwadi Building At Mojje Jite V.P. Jitetal.Karjat Dist.Raigad
Tender Value
12.30 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
2 days left
EMD
12300
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Anganwadi Building At Mojje Jite V.P. Jitetal.Karjat Dist.Raigad
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1 - Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means |
| 2 | Item No.2 - Excavation for foundation in hard rock by chiselling ,wedging,line drilling etc including trimming and levelling the bed removing the excavated material upto a distance 50 `metres,beyond the building area ands tacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.5m.) By Mechanical Means |
| 3 | Item No.3 - Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 4 | Item No.4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, |
| 5 | Item No.5 Providing & Laying in Situ/readymix cement concrete M20 of Trap / Granite /quartzite/gneiss metal for R.C.C. Work in foundation like raft , strip foundations ,grillage and footings of R.C.C.Columns and steel stanctions etc.including bailing out water,formwork,cover blocks compaction and curing roughening the surface if special finish is to be provided ( Excluding reinforcement and structural steel) etc.Complete.with fully automatice micro processor based PLC with SCADa enabled reversible drum type Mixer /Cioncrete batch mix plat (pan |
| 6 | Item No.6 Providing & Laying in Situ / Ready Mix cement concrete in M-20 of Trap / Granite /quartzite/gneiss metal for R.C.C. Columns as per detailed design and drawings or as directed including Centering ,formwork ,cover blocks compaction and curing roughening the surface if special finish is to be provided ( Excluding reinforcement and structural steel) etc.Complete.with fully automatice micro processor based PLC with SCADa enabled reversible drum type Mixer /Cioncrete batch mix plat (pan mixer)etc.complete with natural Sand |
| 7 | Item No.7 Providing & Laying in Situ / Ready Mix cement concrete in M-20 of Trap / Granite /quartzite/gneiss metal for R.C.C. Beam & Lintels as per detailed design and drawings or as directed including Centering ,formwork ,cover blocks compaction and curing roughening the surface if special finish is to be provided ( Excluding reinforcement and structural steel) etc.Complete.with fully automatice micro processor based PLC with SCADa enabled reversible drum type Mixer /Cioncrete batch mix plat (pan mixer)etc.complete with natural Sand |
| 8 | Item No.8 Providing & Laying cast in Situ / Ready mix cement concrete in M20 of Trap / Granite /quartzite/gneiss metal for R.C.C. Slabs as per detailed design and drawings or as directed including Centering ,formwork ,cover blocks compaction and curing roughening the surface if special finish is to be provided ( Excluding reinforcement and structural steel) etc.Complete.with fully automatice micro processor based PLC with SCADa enabled reversible drum type Mixer /Cioncrete batch mix plat (pan mixer)etc.complete with natural Sand |
| 9 | Item No.9 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 10 | Item No.10 Providing and fixing in position Fe-415 steel bar reinforcement of various diameters for R.C.C.pile caps footings, foundations, slabs,beams,columns,canopies, staircases,newels,chajjas, lintels, pardies, coping, fins, arches, etc. as per detained designs, drawings, and schedules, including, cutting, bending, hooking the bars binding with wires or tack welding and supporting as required complete. |
| 11 | Item No.11 Providing second class Burnt Bick masonary with conventional / I.S type briks in cement mortar 1:6 in Plinth including bailing out water manually skirting joints. Raking out joints, watering and scaffolding etc Complete. |
| 12 | Item No.12 Filling Plinth & Floors with contractors murrum in 15cm to 20cm layers including watering ,compaction etc.complete |
| 13 | Item No.13 Providing second class Burnt Bick masonary with conventional / I.S type briks in cement mortar 1:6 in superstructure including skirting joints. Raking out joints, watering and scaffolding etc Complete. |
| 14 | Item No.14 Providing and fixing Country cut teak wood single leaf panelled door shutter without fanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. |
| 15 | Item No.15 Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. |
| 16 | Item No.16 Providing and Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kg/Cum.density and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having M.S. hinges 100 mm length, M.S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete |
| 17 | Item No.17 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box |
| 18 | Item No.18 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 19 | Item No.19 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 20 | Item No.20 Providing internal cement plaster 6 mm thick in Two coats in cement mortar 1:4 with neeru finish to concrete , brick surface in all possition including racking out joints , scaffolding and curing etc complete |
| 21 | Item No.21 Providing internal cement plaster 12 mm thick in Two coats in cement mortar 1:4 with neeru finish to concrete , brick surface in all possition including racking out joints , scaffolding and curing etc complete |
| 22 | Item No.22 Providing internal cement plaster 20 mm thick in Two coats in cement mortar 1:4 with neeru finish to concrete , brick surface in all possition including racking out joints , scaffolding and curing etc complete |
| 23 | Item No.23 Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete |
| 24 | Item No.24 Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 25 | Item No.25 Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. |
| 26 | Item No.26 Providing and laying Chequered tiles of having size 30 cm x 30 cm confirming to corresponding I.S.for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 27 | Item No.27 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. |
| 28 | Item No.28 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 29 | Item No.29 Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 30 | Item No.30 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete |
| 31 | Item No.31 Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete |
| 32 | Item No.32 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 33 | Item No.33 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100 kg etc. complete. |
| 34 | Item No.34 Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 35 | Item No.35 .Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete |
| 36 | Item No.36- Providing and fixing 90 cm x 60 cm Marble plate including engraving 10 cm height letter ,figures including painting the letters/figures with aoved colourand shade etc. complete. |
| 37 | Item No.37-Testing Charges for Cement -Basic Test |
| 38 | Item No.38-Testing Charges for Sand -Silt & Clay Content |
| 39 | Item No.39-Testing Charges for Brick-Comp.strength |
| 40 | Item No.40-Testing Charges for CC Cube -Comp.Strength |
| 41 | Item No.41-Testing Charges for Tandur Tilse-Comp.Strength |
| 42 | 2) Other Material |
| 43 | 18% GST |
| 44 | 0.5 % Labour insurance |
| 45 | 1% SQM |
| 46 | 3% Electrification Charges Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender