Tender For Supply And Fixing Of Submersible Motors, Starters, Valves And Laying Of Cables In Kudithangi , In Kumbakonam City Municipal Corporation.
Tender Value
53.70 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
53700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Fixing Of Submersible Motors, Starters, Valves And Laying Of Cables In Kudithangi , In Kumbakonam City Municipal Corporation.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery of Vertical type water/Oil lubricated statically, dynamically, hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 (Reaffirmed 2011) and as amended thereafter to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 rpm. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos., 100 litre HDPE Pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc complete 5000x30 (75 HP) |
| 2 | Kudithangi Old Well Sump |
| 3 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to allcauses. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designedwith minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. 1250LPM X 40M HEAD (15HP) |
| 4 | Supply and delivery of Variable Frequency Drives (VFD) for motors |
| 5 | 175HP - 240HP (Kudithangi Collector Well) |
| 6 | 50HP - 75HP (valayapettai Old Sump) |
| 7 | Supply and delivery of DI D/F Gate (sluice) valves (soft seated) resilient seated soft sealing Gate Valves (Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or GGG 50, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ringprotection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100%leak proof with face to face dimensions as per BS 5163-89/ISI 14846-2000/DIN 3202 F4. Allthe valves should be with electrostatic powder coating both inside and outside with pocket lessstraight through body passage. All the valves are to be compatible for buried application withpressure rating PN 10/16 and with 5 years warranty |
| 8 | 300mm |
| 9 | DI-NON RETURN VALVE WAFER TYPE (DUAL PLATE CHECK VALVE) CONFORMING TO IS AND WITH 5 YEARS WARRANTY |
| 10 | 300mm (Kudithangi Old Sump) |
| 11 | Jointing C.I/ D.I double flanged pipes and specials with rubber insertion or any equivalent to the required specifications with M.S. bolts and nuts etc., complete including charges for special tools and plants such as air compressor and helmets and sheet piles. etc (including cost of jointing materials) |
| 12 | 300mm dia C.I/ D.I-S/S Pipes andSpecials |
| 13 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 14 | Above 50Hp to 85HP |
| 15 | Above 10.00 HP to 20.00 HP |
| 16 | Supply and delivery of Fully Automatic Auto Transformer Starter suitable for the motor offered.Floor mounting type air/ oil cooled Auto Transformer Starter with tapings at 50%, 65%, 80%,housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IV and as amended therafter for operation in AC three Phase 50 Hz (+/- 5%), 415V (+/- 10%) with the following components, under voltage release with no volt coil, over load relay with dashpot arrangements, single phasing preventor, LED ON/ OFF switches, Mounted Ammeter, Earth leakage relay, contactor assembly suitable for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc. |
| 17 | 15 HP Kudithangi Infiltration Well |
| 18 | L.T. CABLES 3 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING |
| 19 | AIR CIRCUIT BREAKER-1000A, 4 Pole 50kA, Microprocessor Based, EDO Breaker Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender