Tender For Providing & Installation Of 1 Nos Sewage Treatment Plant (Stp) Of Capacity 5Kld In Govt. Ayurvedic Hospital Sub Health Centre Ispurtehsil-Haroli, Distt.- Una (H.P.) Under Deposit
Tender Value
16.71 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
2 days left
EMD
33434
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing & Installation Of 1 Nos Sewage Treatment Plant (Stp) Of Capacity 5Kld In Govt. Ayurvedic Hospital Sub Health Centre Ispurtehsil-Haroli, Distt.- Una (H.P.) Under Deposit
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Sep-2026 | Corrigendium regarding date extended | Date | 15-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations, trenches etc., in earth work. lift upto 1.5 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 metres. |
| 2 | Providing and laying cement concrete 1:3:6 ( 1 cement : 3 sand : 6 graded stone aggregate 40 mm.nominal size ) and curing complete excluding cost of form work in foundation and plinth . |
| 3 | Providing and laying cement concrete 1:1: 2 ( 1cement : 1 sand : 2 graded stone aggregate 20 mm nominal size ) and curing complete excluding the cost of form work and reingorcement for reinforced concrete work in :- |
| 4 | Foundation, footing and bases of columns etc. and mass concrete within all leads and lifts complete in all respect. |
| 5 | wall(any thickness but not less than 0.10 mtr Thick. Attached piller Butteress Plinnth |
| 6 | Suspended floors, roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilevers upto floor to level complete in all respect i/c carriage of materials with in all leads and lifts. |
| 7 | Providing form work with steel sheets 3.15 mm thick so as to give a fair finish i/c centering, shuttering, struting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ RCC and PCC work |
| 8 | Foundation , footing and bases of column etc. |
| 9 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters,butteresses, plinth and string courses and the like. |
| 10 | Flat surfaces such as soffits of suspended floors, roofs, landing and the like Floors etc. upto 200 mm thickness in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 11 | Providing mild steel/tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level |
| 12 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In MS hollow square/rectangluer pipes (tata make)beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material in all leads and lifts. |
| 13 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leads and lifts as required as per the direction of Engineer-in-charge |
| 14 | Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material in all leads and lifts as required as per the direction of Engineer in Charges. |
| 15 | Painting two costs (excluding priming coat) on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters complete including carriage of material in all leads & lifts Enamel white paint |
| 16 | Providing and estaiblishment of 5KLD Capacity Sewage Treatment Plant(STP) with following specifications a) Desing criteria (tota quantity -5 Cum) ,PM(06 to 8.5) ,total suspended solids (< 300PPM),COD (<450PPM) ,BOD (<300PPM),Oil & Grease (50mg/l),odour(objectionable,E Coli (10 ^5 CF4/100ml) b) Product water quality (PH(06 to 8.5),total suspended solids(<100PPM),COD(<150PPM),BOD(<30PPM),Oil & grease (Nil),odour (un objectionable),E Coli(10^2CFV)100ml C) Bar screen chamber ,equalization tank ,qeration tank,secondary clarifier ,dual media filter d) Description of electro-mechanical equipement (Blower(17.78 lhp),sewege lifting pump )1HP),filter feed pump (1HP),sludge pump (1HP) ,chlorine dosing unit(2-4lph) ,dual media filter. (all complete as per direction of EIC). |
| 17 | Operation and Maintenance for an STP plant which involves daily monitoring of key parameters like flow and pH, cleaning screens and grit chambers, and inspecting equipment like pumps and blowers. It also includes periodic activities like backwashing filters, chemical dosing adjustments, sludge removal, and scheduled preventive maintenance on mechanical components like motors and gears to ensure efficient operation and compliance with environmental standards. |
| 18 | Helper( for 3 Months) |
| 19 | Operator Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender