Tender For Construction Of Auditorium For Radhakrishanan Govt. Medical College At Hamirpur (Hp) (Sh:-Balance Work Of electrical installation Therein)
Tender Value
94.80 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
1 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Auditorium For Radhakrishanan Govt. Medical College At Hamirpur (Hp) (Sh:-Balance Work Of electrical installation Therein)
BOQ
| Sl. No. | Item Description |
| 1 | SITC of Suspended Round LED 600 MM Dia 30 Watt LED Down Lighter : System Wattage (W) :30 W(±10%) , PF @ Full load & Rated Voltage, ≥0.95 and THD (Ithd%) @ Full load & Rated Voltage : ≤10% and System Lumens (±10%) : 3300 lumens, Driver Efficiency (%) @ Full load & Rated Voltage : ≥85%, Ambient Temperature (°C) : 0-45°C, Operating Frequency (Hz) : 50±3%, Rated Voltage (V)(AC) : 240 VAC, Input Voltage Range (V)(AC) : 150-270, Driver type (external/internal) : External, IP rating :IP40(Housing),IP20(Driver), Housing : Extruded Aluminium housing powder coated , Mounting Arrangement : Suspended Mount , Diffuser/Optical material : High Efficiency Translucence (HET) diffuser , CRI : 80, LED life : 50,000 Hrs, Surge Protection (kV)(Internal) : 2KV, LED CCT Binning : ANSI Bin C.78.377A, LED Photo biological safety report : IEC 62471. UGR Rating as per CIE 117-1995 : <23.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012: including five year on site repalcement warranty with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make Philips, Wipro ,LT as approved by Engineer in Charge. |
| 2 | SITC of Suspended Round LED 1000 MM Dia 50 Watt LED Down Lighter : System Wattage (W) :50 W(±10%) , PF @ Full load & Rated Voltage, ≥0.95 and THD (Ithd%) @ Full load & Rated Voltage : ≤10% and System Lumens (±10%) : 5750 lumens, Driver Efficiency (%) @ Full load & Rated Voltage : ≥85%, Ambient Temperature (°C) : 0-45°C, Operating Frequency (Hz) : 50±3%, Rated Voltage (V)(AC) : 240 VAC, Input Voltage Range (V)(AC) : 150-270, Driver type (external/internal) : External, IP rating :IP40(Housing),IP20(Driver), Housing : Extruded Aluminium housing powder coated , Mounting Arrangement : Suspended Mount , Diffuser/Optical material : High Efficiency Translucence (HET) diffuser , CRI : 80, LED life : 50,000 Hrs, Surge Protection (kV)(Internal) : 2KV, LED CCT Binning : ANSI Bin C.78.377A, LED Photo biological safety report : IEC 62471. UGR Rating as per CIE 117-1995 : <23.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012: including five year on site repalcement warranty with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make Philips, Wipro ,LT as approved by Engineer in Charge. |
| 3 | SITC Recess/Surface 9 Watt LED Down Lighter : System Wattage (W) : 9±2W, PF @ Full load & Rated Voltage, ≥0.95 and THD (Ithd%) @ Full load & Rated Voltage : ≤10% and System Lumens (±10%) : 1080, Driver Efficiency (%) @ Full load & Rated Voltage : ≥85%, Ambient Temperature (°C) : 0-45°C, Operating Frequency (Hz) : 50±3%, Rated Voltage (V)(AC) : 240 VAC, Input Voltage Range (V)(AC) : 140-270, Driver type (external/internal) : External, IP rating : IP40(Housing),IP20(Driver), Housing : Aluminium pressure Die Cast Housing, Mounting Arrangement : Surface/Recess Mount, Diffuser/Optical material : HET Diffuser, CRI : 80, LED life : 50,000 Hrs, Surge Protection (kV)(Internal) : 3KV, LED CCT Binning : ANSI Bin C.78.377A, LED Photo biological safety report : IEC 62471.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012: including five year on site repalcement warranty with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make:- Philips, Wipro ,LT as approved by Engineer in Charge. |
| 4 | SITC 20 Watt DALI DIMMABLE Linear Recess system wattage 20W: +/-10%,PF @ Full load & Rated Voltage : ≥0.95, THD (Ithd%) @ Full load & Rated Voltage : ≤10%, System Lumens (±10%) : 2200, Driver Efficiency (%) @ Full load & Rated Voltage : ≥85%, Ambient Temperature (°C) : 0-45°C, Operating Frequency (Hz) : 50±3%, Rated Voltage (V)(AC) : 240 V, Input Voltage Range (V)(AC) : 140-270(Normal)/198-264(DALI), Driver type (external/internal) : Internal. IP20, Housing : Housing-Extruded Aluminum Housing .Mounting Arrangement : Recess Mount, Diffuser/Optical material : HET Diffuser, CRI : 80, LED life : 50000 Hrs, Color Temperature (K) : 4000K/5700K, Surge Protection (kV)(Internal) : 4 KV, LED CCT Binning : ANSI Bin C.78.377A, LED Photo biological safety report : IEC 62471.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012: including five year on site repalcement warranty with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make Philips, Wipro ,LT as approved by Engineer in Charge. |
| 5 | SITC of COB LED, IP 20, 32W DALI Enabled Recessed downlighter with System efficacy of 100lm/W and system lumen output 3200 lumen, operating in an ambient temperature of 0⁰C to 45⁰C at 50Hz frequency. The product shall comply with IEC 62471 for Photo-biological safety. The LED shall comply with L70 life of 50000 burning hours tested at maximum current. The LEDs used should be with CCT of 4000 K and CRI of Minimum 80, LED Driver shall be external, Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate at nominal rated voltage of 240V with 2.5 kV internal surge protection, Power factor of minimum 0.95, driver efficacy of minimum 85%, and total harmonic distortion (THD) of less than or equal to 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012: including five year on site repalcement warranty with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts Make Philips, Wipro ,LT as approved by Engineer in Charge. |
| 6 | SITC of Recess 24 Watt DALI DIMMABLE LED Down Lighter : System Wattage (W) : 24±10% PF @ Full load & Rated Voltage, ≥0.90 and THD (Ithd%) @ Full load & Rated Voltage : ≤20% and System Lumens (±10%) : 2400, Driver Efficiency (%) @ Full load & Rated Voltage : ≥85%, Ambient Temperature (°C) : 0-45°C, Operating Frequency (Hz) : 50±3%, Rated Voltage (V)(AC) : 240 VAC, Input Voltage Range (V)(AC) : 140-270, Driver type (external/internal) : External, IP rating : IP40(Housing),IP20(Driver), Housing : Aluminium pressure Die Cast Housing, Mounting Arrangement : Surface/Recess Mount, Diffuser/Optical material : HET Diffuser, CRI : 80, LED life : 50,000 Hrs, Surge Protection (kV)(Internal) : 3KV, LED CCT Binning : ANSI Bin C.78.377A, LED Photo biological safety report : IEC 62471.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012: including five year on site repalcement warranty with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts Make Philips, Wipro ,LT as approved by Engineer in Charge. |
| 7 | SITC 5 Watt LED Strip Light and Driver 4000 K for Cove Light as per site condition. Price given for 5 Meter Spool. with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts Make Philips, Wipro ,LT as approved by Engineer in Charge. |
| 8 | Programming for Automation with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts Make Philips, Wipro ,LT as approved by Engineer in Charge. |
| 9 | SITC of 3000 K Inground Light : System Wattage(W) 3 Watt , 150 Lumens System lumens(±10%) and Driver Efficiency(%)@Full load & Rated voltage* ≥80%, LED CCT Binning ANSI Bin C78.377A, LED Photo biological safety report IEC 62471, Diffuser/Optical material High Purity lenses with Tempered frosted step glass, Colour Temperature (K) 3000 K Housing Aluminium die cast powder coated , , Mounting Arrangement Surface(In ground) Mount, Diffuser/Optical material High Purity lenses with Tempered frosted step glass, LED life with L70 criteria 50,000 Hrs, CRI ≥80.Make:- WIPRO/PHILIPS/LT as approved by Engineer-in -charge.( Five year warranty) |
| 10 | SITC of Spike light 10±2W and PF @ Full load & Rated voltage ≥0.90 and 700 Lumens System lumens(±10%), Driver Efficiency(%)@Full load & Rated Voltage ≥85%. Ambient Temperature (°C) 0-45 Deg C, Operating Frequency (Hz) 50 ± 3% Rated Voltage (V)(AC) 240 V , Input Voltage Range (V)(AC) 150-270V. Driver type (external/internal): Internal, IP rating IP65 and HousingAluminium die-cast, Mounting Arrangement : Spike Mount, Diffuser/Optical material : PMMA, Colour Temperature (K) 3000 K, LED life with L70 criteria 30000 Hrs. CRI 80, Surge Protection (kV)2.5 Kv. LED CCT BinningANSI Bin C78.377A , LED Photo biological safety reportIEC 62471 Make Philips, Wipro ,LT as approved by Engineer in Charge. |
| 11 | SITC of Driver including five year on site repalcement warranty with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts.Make:- WIPRO/PHILIPS/LT as approved by Engineer-in -charge. |
| 12 | SITC of Connector including five year on site repalcement warranty with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make:- WIPRO/PHILIPS/LT/ as approved by Engineer-in -charge. |
| 13 | Supplying and fixing of 25mm sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.Make :-AKG,DIPLAST, BEC as approved by Engineer in charge. |
| 14 | SITC Wally Lamp Wall Light 14W B22 Holde including 9 watt lamp with five year on site repalcement warranty with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make:- WIPRO/PHILIPS/LT/ as approved by Engineer-in -charge. |
| 15 | Supplying and fixing of Vertical TPN DB 12 ways surface/ recess mounting, 7 Segment 415volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, with provision to mount FP-MCCB incomer and SP/TP MCBs as outgoing (but without MCB ’s and incomer),complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachablegland plate, cable interconnections, including earthing etc. as required:- Make :- L&T, ABB, HAGER LEGRAND as approved by Er in charge |
| 16 | Supplying and fixing 3 Pole 40- 63 amps rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of four poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make :- L&T, ABB, HAGER LEGRAND as approved by Er in charge |
| 17 | Supplying and fixing of 20 mm dia heavy class PVC conduit along with accessories insurface/recess including painting in case of surface conduit, or cutting the walland making good the same in case of recessed conduit as required.Make :-AKG,DIPLAST, BEC as approved by Engineer in charge. |
| 18 | Providing, laying and fixing of PVC round sheathed 3 core 6 sqmm FRLS(Heavy Duty) copper conductor flexible cable for voltage grade up to 1100 volt , as required complete in all respect. including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make :-Finolex/Havells/Polycab/plaza as approved by Engineer in charge. |
| 19 | Providing, laying and fixing of PVC round sheathed 4 core 6 sqmm FRLS(Heavy Duty) copper conductor flexible cable for voltage grade up to 1100 volt , as required complete in all respect. including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make :-Finolex/Havells/Polycab/plaza as approved by Engineer in charge. |
| 20 | Providing, laying and fixing of PVC round sheathed 4 core 10 sqmm FRLS(Heavy Duty) copper conductor flexible cable for voltage grade up to 1100 volt , as required complete in all respect. including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make :-Finolex/Havells/Polycab/plaza as approved by Engineer in charge. |
| 21 | Providing, laying and fixing of PVC round sheathed 3 core 10 sqmm FRLS(Heavy Duty) copper conductor flexible cable for voltage grade up to 1100 volt , as required complete in all respect. including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make :-Finolex/Havells/Polycab/plaza as approved by Engineer in charge. |
| 22 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make :-Finolex/Havells/Polycab/plaza as approved by Engineer in charge.Armoured cable 6 sq. mm (Four core) |
| 23 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts. Make :-Finolex/Havells/Polycab/plaza as approved by Engineer in charge.Armoured cable 6 sq. mm (Twin core) |
| 24 | Supplying and fixing of TPN Distribution box tripple pole and neutral of 4 way surface/ recess mounting, 7 Segment 415volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, with provision to mount FP MCB incomer, DP MCB/RCCB sub-incomer in each phase and SP MCBs as outgoing (but without MCB ’s and incomer), complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachable gland plate, cable interconnections, including earthing etc. as required:-Make L&T, Hager,ABB as approved by Engineer-in -charge.(five year warranty) |
| 25 | Supplying and fixing of TPN Distribution box tripple pole and neutral of 6 way surface/ recess mounting, 7 Segment 415volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, with provision to mount FP MCB incomer, DP MCB/RCCB sub-incomer in each phase and SP MCBs as outgoing (but without MCB ’s and incomer), complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachable gland plate, cable interconnections, including earthing etc. as required:-Make L&T, Hager,ABB as approved by Engineer-in -charge.(five year warranty) |
| 26 | Supplying and fixing Cable junction box 1X4 Module IP 65 Protection with Din rail with all accessories including connections etc as required Make Hensel , Sintex as approved by Er in charge |
| 27 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 16205, Part 24 complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 40 mm dia (OD-40 mm & ID-32 mm nominal) |
| 28 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 29 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulatedcopper conductor single core cable in surface/ recessed PVC conduit heavy duty, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required |
| 30 | SITC Comercial profile light 3watt size 20 mm(W) X 600 mm (L) including Aluminium Base and cover of same size 3000/4000 k with all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts Make Philips, Wipro ,LT,panasonic as approved by Engineer in Charge. |
| 31 | Supplying and erection of following depth Indoor cubical panel, as per the standards IEC 61439-1&2 as tested assembly, IP 42 fabricated CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning& finishing complete with 7 tank process powder coating in approved shade,, DMC/ SMC bus bar supports,bottom base channel of MS section not lessthan100 mmx 50 mmx 5 mm thick, fabrication shall be done in transportable sections, form of separation shall be form 4b with metallic separation only,the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level, thick.The size of control wiring in cubical panel FR-LSH 1.5 sqmm.The panel should be approved /Tested from the CPRI lab. make of switcgear L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty).The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government. |
| 32 | 1000 mm Deep |
| 33 | Supplying and fixing 4 pole microprocessor ACB 1250 AMP , breaking capacity 50 kA confirm to IS/IEC 60947-2 and IEC 60947-2 electrically operated draw outversion, high short time fault with standing capacity Icu=Ics-low for 1 second for total selectivity, High mechnical and elecrtrical operting life protected through micro processor releases with on load test button inbuildt thermal memory, protection releases confirm to EMI/EMC standards, data communication and power management, breaker status and control thourgh MODBUS protocol (UN-CO module) Make:- L&T Legrand, Hager, ABB as approved by Engineer-in -charge. |
| 34 | Supplying and fixing Aluminium strip bus-bars suitable for 1200 Amp. 415 volts capacity 4 No. each of cross-sectional area (50X12 mm ),).in the existing enclosure with all accessories including connections etc. as required:-.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government. |
| 35 | Supplying Installaion Testing & commissiong of indicator set RY&B in existing cubicle panel board with 3 Nos Kit kat (LED type) to shown the three indicating in the existing pannel complete etc as required.Make L&T, Schneider,ABB as approved by Engineer-in -charge..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government. |
| 36 | Supplying Installaion Testing & commissiong of Multi Function Meter in existing cubical panel board with 3 Nos. Cast Resin CTs and MCBs including V, A ,F ,P.F, KW, KVA, RUN HOUR,KWH,(EV AND DG), OLD ENERGY, SELECTATBLE KWH-KVH parameters connections , testing, commissioning etc. as requiredMake:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) Make L&T, Schneider,ABB as approved by Engineer-in -charge..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender