Tender For Laying In Take Pipeline From Rd 152340/L Of Narwana Branch Along With Construction Of Sump Well And Haudi
Tender Value
45 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying In Take Pipeline From Rd 152340/L Of Narwana Branch Along With Construction Of Sump Well And Haudi
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. mechanical means. |
| 2 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 3 | Plain/Reinforced cement concrete grade M30 in sub-structure with batching Plant, Transit Mixer and Concrete Pump complete as per drawing and technical specifications with Height up to 5m. |
| 4 | Supplying,fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing & technical specification |
| 5 | Providing surface treatment to external / internal wall with water resistant grade, anti fungal, anti rusting, antifoaming, high percentage acrylic binder washable surface with two coats to be provided with spatula over one coat cement primer including preparation of surface with water resistant grade match colour complete as per specifications and to the entire satisfaction of engineer- in- charge. |
| 6 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 7 | Cement Conc. 1:4:8 with brick balast 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 8 | Cement Conc. 1:2:4 (for bed) With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type |
| 9 | First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth |
| 10 | 10 mm thick plaster with cement mortar 1:4 on bed & top of side walls |
| 11 | 10 mm thick plaster with cement mortar 1:4 on side walls (inner Side) |
| 12 | RCC slab 1:2:4 with 80 kg steel per cum |
| 13 | Foot Rest for Manhole. Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design. |
| 14 | Providing of D.I. Pipe and cost of rubber ring as per IS 8329 DI-K7 500 mm i/d pipe |
| 15 | Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage,.D.I. Pipe as per IS 8329 DI-K7 500 mm i/d pipe lines laid complete |
| 16 | Dismantling metalling or dry brick ballast |
| 17 | Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 18 | Granular Sub-Base (Table 400-1) Construction of granular sub-base by providing material as per grading-III ( Table 400-I of MORT&H 5th revision), mixing in a mechanical mix plant at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications |
| 19 | Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-inCharge |
| 20 | Precast Cement Concrete kerb Providing and laying factory made rubber moulded smooth finish cement conc. Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement morter 1:2 |
| 21 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge).Class PN-1.6 as per ISI Special quality Sluice Valve of premium range such as make kirlosker as approved by Engineer-in-Charge.500mm i/d Sluice Valves flanged. |
| 22 | Earth work Excavation for pipe line in trenches and pits up to 1.5 meters depth in open area where disposal of surplus earth is done alongwith alignment, including trimming and dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, refilling; consolidation and watering of refill in 15cm layers and Restoration of unmetalled or unpaved surface to its original condition excluding cost of shoring and timbering but including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, watching, fencing etc. |
| 23 | Providing and fixing of DI fitting mechanical joint collar size 500mm as per IS 9523-2000 (K-12) including flange drilling & all other necessary accessories, complete in all respect |
| 24 | Providing & fixing 45 degree double socket DI bend for DI pipes in riser main including all nuts,bolts,flanges etc. complete in all respect size 500 mm |
| 25 | Providing & fixing 22.5 degree double socket DI bend for DI pipes in riser main including all nuts,bolts,flanges etc. complete in all respect size 500mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender