Tender For Internal Electrification Of Aecs-Iv Phase-2 And Associated Works In Anupuram Township.
Tender Value
2.44 Crore
Estimated cost
Bid Submission
23 Sep 2026
9 days left
EMD
4.88 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Electrification Of Aecs-Iv Phase-2 And Associated Works In Anupuram Township.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+) Less (-) Tender Inviting Authority: Chief Engineer, Engineering Services Group, GSO, Kalpakkam. Name of Work: Internal Electrification of AECS-IV Phase-2 and associated works in Anupuram Township. Tender No: GSO/CTC/ESD/350/2026 Name of the Bidder/ Bidding Firm / Company : PART-II (FINANCIAL BID) Note : 1) This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. 2) Bidders are allowed to enter the Bidder Name and Values only.3) Rates quoted should be inclusive of GST @ 18% and any other taxes as applicable. NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Item.No. Item Description Item Code / Make Quantity Units Estimated RateinRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE including all taxes in Figures to be entered by the Bidder inRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Rates in words Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Unit for Rate TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Supply, installation, testing and commissioning of Power Distribution panels / MCC as per the detailed specification. |
| 3 | 415V Class - IV Power Control Centre - PCC as per dwg no. GSO/ESG/ESD/ATS/AECS-IV /PH-II/01. (Refer Sec.V Part B) |
| 4 | 415V Class - IV MCC as per dwg no. GSO/ESG/ESD/ATS/AECS-IV/PH-II/02. (Refer Sec.V Part B) |
| 5 | 415V Class - IV MDB-1 as per the dwg no.GSO/ESG/ESD/ATS/AECS-IV PH-II/03. (Refer Sec. V Part C) |
| 6 | 415V Class - IV MDB-2 as per the dwg no.GSO/ESG/ESD/ATS/AECS-IV PH-II/04. (Refer Sec. V Part C) |
| 7 | Design, Manufacture, Assembly, Inspection, Packing, Supply and Delivery at site, Installation, Testing, Commissioning and Handing over of 1360Kgs / 20 Passenger MRL Lift complete as per Detailed Specification. (Refer Section-V Part-D) |
| 8 | Design, manufacturing, testing at manufacturer's works packing, transportation, delivery, unloading, storage, erection, testing and commissioning of 5 kVA True On-Line UPS with Batteries as per the detailed specification and as directed by Engineer-in-charge. ( Refer Sec-V Part-E) |
| 9 | Design, Manufacturing, Supply Installation, Testing and commissioning of Wall mountable Sanitary Napkin Incinators with Smoke Control Unit as per the detailed specification and as directed by Engineer-in-charge. ( Refer Sec-V Part-F) |
| 10 | Supply, open installation, testing and commissioning of the following sizes of VTPN DBs with MCCB & MCB on MS frame work (MS frame will be measured separately) as per the scope of work. (Refer Sec VI, Clause No.15.1). |
| 11 | DB VTPN 8 Way (8 Plus 24) IP 43 - IK 09 with 1No. 160A, 4 Pole DPX3 MCCB (for Incomer) and 6 Nos. 63A,3P MCB (for outgoing), Cat No:507747 or equivalent. The scope includes suply of 1 No. spare MCCB of same make and rating as per section V Part A) |
| 12 | Supply, open installation, testing and commissioning of the following sizes of cable end termination box on MS frame work (MS frame will be measured separately) as per the scope of work. (Refer Sec VI, Clause No.15.1.15). |
| 13 | VTPN,8 way Cable end box, Cat No: 5079 38 or equivalent suitable for VTPN, 8 way with MCCB incomer Distribution Board Cat No:5077 47 |
| 14 | Supply, open installation, testing and commissioning of the following sizes of DBs with RCCB & MCB on MS frame work (MS frame will be measured separately) as per the scope of work. (Refer Sec VI, Clause No.15.1). |
| 15 | Stage PDB as per dwg no. GSO/ESG/ESD/ATS/AECS-IV /PH-II/05 and detailed specification (Refer Sec. V Part A) |
| 16 | Lighting Control DB as per dwg no.GSO/ESG/ESD/ATS/AECS-IV /PH-II/06 and detailed specification (Refer Sec. V Part A) |
| 17 | Supply, open installation, testing and commissioning of the following Remote Panel / Power Control Panel on MS frame work (MS frame will be measured separately) as per the detailed specification and as directed by Engineer-In-Charge. |
| 18 | Supply, installation, testing and commissioning of Fire Water Pump remote push button box as per dwg no.GSO/ESG/ESD/ATS/AECS-IV /PH-II/07 and detailed specification (Refer Sec. V Part A) |
| 19 | Supply, installation, testing and commissioning of Play Court Power Control Panel as per Drawing No. GSO/ESG/ESD/ATS/AECS-IV /PH-II/08 and Play Court Remote Push Button Station as per the Dwg No. GSO/ESG/ESD/ATS/AECS-IV /PH-II/09. and as per the detailed specifications. (Refer Sec. V Part A) |
| 20 | Supply, installation, testing and commissioning of Change over switch (CO10630OSOO ) as per detailed specification (Refer Sec. V Part A) |
| 21 | Assembling, installation, testing and commissioning of MCB DB enclosure already embedded in the wall including supply of Engraved Circuit Identification Plate and Danger Board as per the detailed specification for the following size of MCB DBs. (Refer Sec VI, Clause No.15.3). |
| 22 | SPN, 4/6/8 Way Distribution Board |
| 23 | SPN, 12/16 Way or TPN 4/6 Way Distribution Board |
| 24 | TPN, 8 Way Distribution Board |
| 25 | TPN, 12 Way Distribution Board |
| 26 | Supply Installation testing and commissioning of the following MCB on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2). |
| 27 | 6-32 Amps SP MCB (Type-C) |
| 28 | 6-32 Amps DP MCB (TYPE-C) |
| 29 | 40-63Amps, FP MCB (TYPE-C) |
| 30 | Supply fixing testing and commissioning of the following RCBOs on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2). |
| 31 | RCCB DP 25A 30mA, TYPE AC |
| 32 | RCCB DP 25A sensitivity 30mA, TYPE Hpi |
| 33 | RCCB DP 40A 30mA, TYPE AC |
| 34 | RCCB DP 63A 30mA, TYPE AC |
| 35 | RCCB FP Pole, 63 Amp, 300mA sensitivity Type AC |
| 36 | Supply, embedment and flush mounting of DP Cat No:507791/ FP Cat No:507793 Metal enclosure (M/s Legrand/BCH or equivalent make) for MCBs, RCCBs, RCBOs including chipping and finishing as per the detailed specification. (Refer Sec VI, Clause No.15.5). |
| 37 | Supply, embedment and flush mounting of FP RCBO Metal enclosure Cat No:507794 (M/s Legrand/BCH or equivalent make) Metal enclosures for MCBs, RCCBs, RCBOs including chipping and finishing as per the detailed specification. .(Refer Sec VI, Clause No.15.5). |
| 38 | Wiring for lights / fans /sensors/ Timer /Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18) |
| 39 | Wiring for Light/Sensor/Fan Points with 2 Runs of 1.5 Sq.mm copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for Earth from MCB Distribution Board to Primary light/sensor/fan point through Control Switch Box including 6Amps modular switch. |
| 40 | Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to switch box and further to Light point including 1 No 6A modular switch |
| 41 | Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Light point/Ceiling fan including 1 No 6A modular switch |
| 42 | Wiring for fan point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Fan point including 1 No 6A modular switch and 1 No Fan regulator suitable for BLDC Fan |
| 43 | Wiring for Light point ( 2 way control) with 3 Runs of 1.5 Sq.mm copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for Earth from Control switch box to light point through Control Switch Box including 2 Nos of 2 way 6A modular switch. Board to Primary light point through Control Switch Box including 2 Nos of 2 way 6A modular switch |
| 44 | Wiring for Exhaust fan point up to 3Mtr height with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch board to Power point including supply of 3 pin 6A shuttered type Socket, 2Nos. 2 Modular plate and 1 No 6A modular switch. |
| 45 | Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Light point to Light point /sensor/contactor |
| 46 | Wiring for Power Points with 2 Runs of 4.0 Sq.mm Copper wires for Phase, Neutral and 1 Run of 2.5 Sq.mm Copper wires for Earth from MCB Distribution Board to Single Phase Metal Clad Socket. |
| 47 | Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from MCB Distribution Board to Power point through Control Switch Box including 16A modular switch, 6/16 Amps combined shuttered type Socket and 6A modular switch & 3 pin, 6A shuttered type Socket, Modular Plate. |
| 48 | Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from Control Switch Box to control switch box including 6A modular switch & 3 pin 6A, shuttered type Socket and 16A modular switch & 6/16A combined shuttered type Socket, Modular plate |
| 49 | Wiring with 1 Run of 1.5 Sq.mm Copper wire |
| 50 | Wiring with 1 Run of 2.5 Sq.mm Copper wire |
| 51 | Supply and fixing following Modular front cover plate on existing modular metal/plastic boxes etc. as required. (Refer Sec VI, Clause No.15.7). |
| 52 | One/Two module |
| 53 | 3 Module |
| 54 | 4 Module |
| 55 | 6 Module |
| 56 | 1 Modular dummy plate |
| 57 | Supply and Installation of following sizes of Surface Mounting Plastic Boxes as per the detailed specification. (Refer Sec VI, Clause No.15.6). |
| 58 | Surface Mounting Plastic Boxes 6 Module |
| 59 | Surface Mounting Plastic Boxes 3 Module |
| 60 | Surface Mounting Plastic Boxes 1/2 Module |
| 61 | Supply and Installation of 1 No16A Switch on modular plate and termination of wires to the switches as per the detailed specification (Refer Sec VI (MNC), Clause No.5). |
| 62 | Supply and Installation of 1 No 6A 3 Pin shuttered type Socket on modular plate and termination of wires to the switches as per the detailed specification (Refer Sec VI (MNC), Clause No.5). |
| 63 | Supply and Installation of 1 No 6/16A 3 Pin combined shuttered type Socket on modular plate and termination of wires to the switches as per the detailed specification (Refer Sec VI (MNC), Clause No.5). |
| 64 | Supply and external installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with all the required accessories like round JBs, Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc. as per the detailed specification. .(Refer Sec VI, Clause No.27). |
| 65 | 25mm dia 1.8mm wall thickness Heavy Duty, Hot Dip Galvanised/ ERW Conduits with 50mm deep junction boxes. |
| 66 | Supply and installation of following sizes of Heavy Duty, PVC circular rigid Conduits for Electrical & Communication System with all the required accessories like round JBs, Solid Long Bends, Couplings, GI wire etc, on roof slab, column, beams etc as per the detailed specification.(Refer Sec VI, Clause No.27). |
| 67 | 25mm Dia, 2mm wall thick PVC heavy duty conduit with 63mm deep Junction box |
| 68 | Supply and Installation of following sizes of PVC trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the detailed specification.(Refer Sec VI, Clause No.29) |
| 69 | 25 x 12 mm size of PVC Mini trunking |
| 70 | Supply and installation of 80 X 50 mm size of U-PVC trunking including all the required accessories joints, flat angle,junctions, External & Internal angle, partition separation and end cap as per site requirements. Make: Legrand, Model: DLP (Refer Section V) |
| 71 | Supply & Installation of Power point with one way 20A modular switch (5734 10), 6/16 Amps combined shuttered type Socket (5734 71) and one way 6A modular switch (5734 00)& 5 pin, 6A shuttered type Socket (5734 70), 6 Modular frame & Plate (0109 61) suitable for fixing in legrand DLP truncking. Make : Legrand, Model : Arteor or equivalent. |
| 72 | Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 73 | 3/3.5/4 Core x Upto 25 sqmm |
| 74 | 3/3.5/4 Core x above 25 & up to 120 sqmm |
| 75 | 3/3.5/4 Core x above 120 & up to 240 sqmm |
| 76 | 3/3.5/4 Core x above 240 & up to 400 sqmm |
| 77 | Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 78 | 3/3.5/4 Core x upto 25 Sqmm |
| 79 | 3/3.5/4 Core x above 120 & up to 240 sqmm |
| 80 | 3/3.5/4 Core x Above 240 sqmm to 3/3.5/4Core X 400 sqmm |
| 81 | Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of PVC insulated & Sheathed, armoured control cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification.(Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 82 | Upto 14 Core 2.5 sqmm |
| 83 | Above 14 Core & Upto 37 Core 2.5 sq mm |
| 84 | End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1). |
| 85 | 4 Core x 10 Sqmm |
| 86 | 4 Core x 16 Sqmm |
| 87 | 3.5/4 Core x 35 sq.mm |
| 88 | 3.5/4 Core x 50/70 sq.mm |
| 89 | 3.5/4 Core x 120 sq.mm |
| 90 | 3.5 Core x 185 sq.mm |
| 91 | 3.5 Core x 400 sq.mm |
| 92 | End termination of 1100 Volts Grade XLPE/PVC insulated, control cables of the following sizes using Single Compression, Heavy Duty, Siemens type Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Dowell |
| 93 | 4 Core x 2.5 Sq.mm including cable gland earthing |
| 94 | 19 Core x 2.5Sqmm |
| 95 | Supply, transportation, installation, testing and Commissioning of the following luminaires as per the specification. (Refer Sec VI, Clause No.16.1) |
| 96 | Supply, transportation, installation, testing and Commissioning of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WAND K 30W 5700K code SLWKY03057NDWEP04C22 -SURFACE LIGHTS NONDIM WITH CUSTOMIZED CLAMP OF 30 DEG. TILT WHITE (PC) 4FEET- PRIME or equivalent and Lamp Type LED |
| 97 | Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WAND K 9W 5700K Code - SLWKB00957NDWEP0002C01 - 2 feet Batten PRIME or equivalent and Lamp Type LED |
| 98 | Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires.(Refer Sec VI, Clause No.16.1). - Catalogue No : SM261C LED20S 4000 PSU WH or equivalent and Lamp Type LED |
| 99 | Supply, transportation, installation, testing and Commissioning of the following type of Wall (surface) mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WT202W LED6S CW PSU S2 PC or equivalent and Lamp Type LED |
| 100 | 36 Watts (max), 4600 Lumen, surface mounting decorative LED flat panel Luminaires with PDC aluminium housing and PC Diffuser as per the detailed specification. |
| 101 | Supply, Installation, Testing and Commissioning of following Flood light luminaries on RCC/Metalic poles of height from 7 M to 12 M as per per the detailed specification. (Refer Sec VI, Clause No.16.1). - Catalogue No : BVP 281 LED085 CW FG SY5WB 70W PSU or equivalent and Lamp Type LED |
| 102 | Supply, cleaning the floor, proper pasting and installation of following insulating mat as per specification. (Refer Sec VI, Clause No.25). |
| 103 | 2.0 mm thickness, Max useable voltage 3.3kV, AC Proof voltage 10kV for 3 minutes, AC dielectric strength 30kV RMS Insulating Mat confirming to IS:15652 |
| 104 | Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11). |
| 105 | MS fabrication 1 coat primer & 2 coats synthetic enamel paint |
| 106 | GI: MS fabrication With hot dipped galvanising. |
| 107 | Supply, installation and testing of GI Pipe Earth Electrode as per IS: 3043 including RCC Chamber and RCC cover slab as per Drawing Nos. IGC/ESD/5060/1007/1 & IGC/ESD/5060/1008/1 are enclosed. (50 Kg. Each Bentonite & Charcoal shall be provided for each earth pit). (Refer Sec VI, Clause No.12.4). |
| 108 | Supply and installation of the following sizes of copper wires in built in trench as per the detailed specification.(Refer Sec VI, Clause No.12.8) |
| 109 | 8SWG copper wire |
| 110 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9). |
| 111 | 50 x 6 mm GI flat |
| 112 | 25 x 6 mm GI Flat |
| 113 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats including excavation and refilling as per the detailed specification. No cutting or drilling permitted after galvanisation.Refer Sec VI, Clause No.12.9). |
| 114 | 50 x 6 mm GI flat |
| 115 | 25 x 6 mm GI Flat |
| 116 | Supply and open installation of following Sizes of MS boxes as per the detailed specification. (Refer Sec VI, Clause No.15.10). |
| 117 | FRP Junction Box (Street light JB) |
| 118 | Supply and Installation of laminated Hylam sheet of 3mm thickness over the boxes and as per the detailed specification. (Refer Sec VI (MNC), Clause No.5. ) |
| 119 | Supply, Installation, testing and commissioning of 1200 mm size of BLDC Ceiling Fans with suitable safety steel rope with 3 Core, 1.5 Sq.mm flexible copper cable including earth connection.Supply and fixing of regulator is not included in the scope of this item. (Refer Section -V Part A for supply & Sec VI, Clause No.17.1 for Installation). |
| 120 | Supply, installation, testing and commissioning of following sizes of Wall Mounting Exhaust Fans including supply of Aluminium grill bracket with Stainless Steel Bolts for mounting of Exhaust Fan & Aluminium grill bracket and 3 Core, 1.5 Sq.mm PVC insulated & FRLS sheathed copper flexible cable of required length as per the detailed specification. (Refer Sec VI, Clause No.17.2). |
| 121 | 230 mm dia Medium duty , Double ball bearing exhaust fan |
| 122 | 300 mm Dia Turbo Heavy Duty Exhaust Fan |
| 123 | Supply, installation, testing and commissioning of following sizes of Wall Mounting Fans as per the detailed specification. (Refer Sec VI, Clause No.17.4). |
| 124 | 600mm dia Industrial wall Mounting fan |
| 125 | 400 mm sweep MAXX AIR TPW wall mounting fan |
| 126 | Excavation in hard soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2) |
| 127 | Supply, installation, testing and commissioning of IP54 Outoor Isolation box as per the drawing no.GSO/ESG/ESD/ATS/AECS-IV /PH-II/10 and as per the detailed specification (Refer Sec. V Part A) |
| 128 | Supply and fixing of 300 mm long Lightning Air Termination made out of 25mm GI Rod welded with 125 x 125 x 10mm GI Base Plate including supply of 4 Nos. of M10 stainless steel bolts, nuts and washers as per the detailed specification. |
| 129 | Supply, Installation, testing and commissioning of following Electrical accessories as per the detailed specification and as directed by the Engineer-In-Charge. |
| 130 | Supply, Installation, testing and commissioning of 9 inch dia, 230V, 50Hz industrial Gong Bell with suitable connecting leads as per the detailed specification and scope of work. |
| 131 | Supply and installation of Automatic School Bell Ringing Sytem as per the detailed specificaiton. |
| 132 | Supply and Installation of 3 Core x 2.5 Sq.mm PVC Insulated, PVC round sheathed Multicore, Flexible Copper Conductor Cables in HDPE pipe as per the detailed specification and as directed by Engineer incharge. |
| 133 | Supply, Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of 1.1 KV grade of following size of the cable through direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required.(Refer Sec VI, Clause No.3) |
| 134 | 4C x 10 sqmm 1.1kV grade Aluminium conductor HRPVC insulation flat wire armour FRLSH PVC outersheath |
| 135 | Supply, Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade following sizes of cables in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification.(Refer Sec VI, Clause No.3) |
| 136 | 4C x 10 sqmm 1.1kV grade Aluminium conductor HRPVC insulation flat wire armour FRLSH PVC outersheath |
| 137 | Retrieval of the already laid one number PVC/HRPVC/XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following sizes laid direct in ground including removal of end termination, excavation of trenches, retrieving of bricks, back filling and Re - laying the same cable direct in ground by using retrieved bricks including transportation of cables, excavation and backfilling of soil, supply of sand & shortage bricks etc as per the detailed specification. (Refer Sec VI, Clause No.7) |
| 138 | 3/3.5/4 Core Above 25sqmm & upto120 sqmm |
| 139 | 3/3.5/4 Core Above 120sqmm & upto 240 sqmm |
| 140 | Retrieval of the already laid one number PVC/HRPVC/XLPE insulated and PVC sheathed power cable of 11 KV grade of following sizes laid direct in ground including retrieval of end termination, excavation of trenches, retrieving of bricks, back filling and Re - laying the same cable direct in ground by using retrieved bricks including transportation of cables, excavation and backfilling of soil, supply of sand, shortage bricks etc as per the detailed specification. (Refer Sec VI, Clause No.7) |
| 141 | 3 Core Above 120 & Upto 240 sqmm |
| 142 | Retrieval of the already laid one number 11kV (E), 3 Core, Aluminium Conductor, XLPE insulated Power cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of GI spacer, clamps etc and relaying the same cable in built-in trenches, on walls, poles and through embedded pipes using the retrieved Spacer & clamp & supplying the shortage Spacer & clamp if any as per the detailed specification. (Refer Sec VI, Clause No.7) |
| 143 | 3 Core Above 120 & Upto 240 Sqmm |
| 144 | Supply, installation, testing and commissioning of Raychem make the following Heat Shrinkable Cable end Termination without gland for 3 Core Aluminium Conductor, 11 kV, XLPE insulated cables of following sizes. (Refer Sec VI, Clause No.10.5). |
| 145 | 3 Core x 185 Sq.mm XLPE (Indoor) |
| 146 | Supply, installation, testing and commissioning of the following Raychem make Heat Shrinkable Cable Straight Through Jointing Kits (Mechanical Connector type/Crimping type) Rayfit tubing for 3 Core Aluminium Conductor, 11 kV (E), XLPE insulated cables of following sizes including excavation of soil, backfilling etc as specified. (Refer Sec VI, Clause No.10.6). |
| 147 | Straight Through Joint (Crimping type) for 3 Core x 185 Sq. mm |
| 148 | Supply and installation of following size Hot dip Galvanised Perforated type Cable Tray on Walls / MS support as per the detailed specification and as directed by the Engineer-In-Charge. |
| 149 | Supply and installation of 300mm(W) x 100mm(H) x 3mm thick Hot dip Galvanised Perforated type Cable Tray with 2 Nos. Coupler Plates and required accessories viz. Elbow, Bends, Tee, Cross and Reducer, etc as per the detailed specification. |
| 150 | Supply and installation of 150mm(W) x 100mm(H) x 3mm thick Hot dip Galvanised Perforated type Cable Tray with 2 Nos. Coupler Plates and required accessories viz. Elbow, Bends, Tee, Cross and Reducer, etc as per the detailed specification. |
| 151 | Supply, Installation, Testing and Commissioning of following area lighting luminaries as per the detailed specification and as directed by the Engineer-In-Charge. |
| 152 | Supply, Installation, Testing and Commissioning of area lighting luminaries on Metalic poles of height from 2.5 Mtr to 4 Mtr as per per the detailed specification. (Refer Sec VI, Clause No.16.1). - Catalogue No : LPTO-40-CDL and Lamp Type LED |
| 153 | Supply, Installation, Testing and Commissioning of following street light luminaries on RCC/Metalic poles of height from 7 M to 12 M as per per the detailed specification. (Refer Sec VI, Clause No.16.1) - Catalogue No : BRP501 LED078 CW R5CPSU S1or equivalent and Lamp Type LED |
| 154 | Supply and Installation of 3.75mtr Area lighting poles With PU painting (Pedestal type). (Refer Sec VI, Clause No.13.3 & 13.4). |
| 155 | Post top Lantern pole including supply and embedment of Cast Aluminium Junction Box with FRP cover as per the drawing No: - IGC/ESD/2021/6001/1-R1. 3.75mtr 50NB GI pole with PU painting, cable entry pipe, cable termination arrangements etc. including providing of 1:4:8 mudmat and 1:3:6 foundation PCC conforming to the detailed specification 1mtr 16mmDia SS rod with SS wire (2 runs) equivalent to 8SWG and as per Drawing No. - IGC/ESD/2021/6001/P2-R1. |
| 156 | Supply and Installation of 7/9meter Single arm/Double arm GI pole. (Refer Sec VI, Clause No.13.1 & 13.2). |
| 157 | Supply & Installation of 7 meters high Hot dipped G.I street light pole including painting with PU paint, foundation EP, heavy duty GI cable entry pipe in 1:3:6 PCC foundation, excavation and refilling etc as per the drawing no:IGC/ESD/4013/5005/1-R1 for single arm GI pole and drawing no:IGC/ESD/4013/5005/3-R1 for Double arm GI pole including supply of GFRP boxas per the drawing no: IGC/ESD/2021/6001/3, 40 NB heavy duty GI pipe,40 NB heavy duty long bend, Clamp for JB with 25 x 6mm Alu. flat ,1mtr 16mm Dia SS rod with SS wire (2 runs) equivalent to 8SWG , 3C x 1.5 sqmm copper flexible cable, fixing fasteners etc as required |
| 158 | Supply & Installation of 9 meters high Hot dipped G.I street light pole including painting with PU paint, foundation EP, heavy duty GI cable entry pipe in 1:3:6 PCC foundation, excavation and refilling etc as per the drawing no:IGC/ESD/4013/5005/1-R1 for single arm GI pole and drawing no:IGC/ESD/4013/5005/3-R1 for Double arm GI pole including supply of GFRP boxas per the drawing no: IGC/ESD/2021/6001/3, 40 NB heavy duty GI pipe,40 NB heavy duty long bend, Clamp for JB with 25 X 6mm Alu. flat ,1mtr 16mm Dia SS rod with SS wire (2 runs) equivalent to 8SWG , 3C X 1.5 sqmm copper flexible cable, fixing fasteners etc as required |
| 159 | Supply, Installation, Testing and Commissioning of following Flood light luminaries on RCC/Metalic poles of height from 7 M to 12 M as per per the detailed specification. (Refer Sec VI, Clause No.16.1). - Catalogue No : LT Transformer G20 M2 400W or equivalent and Lamp Type LED |
| 160 | Supply, Installation, Testing and Commissioning of following Flood light luminaries on RCC/Metalic poles of height from 7 M to 12 M as per per the detailed specification. (Refer Sec VI, Clause No.16.1) - Catalogue No : LT Transformer G20 200W or equivalent and Lamp Type LED |
| 161 | Loading, Transportation, Unloading at site, installation, Testing and Commissioning of one number of armoured Telephone cable of following sizes direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required.(Note: Cable will be issued free of cost by the department). (Refer Sec VI, Clause No.3) |
| 162 | Above 20 Pair & Upto 50 Pair |
| 163 | Above 50 Pair & Upto 200 Pair |
| 164 | Loading, Transportation, Unloading at site, installation, Testing and Commissioning of one number of armoured PIJF 0.5mm (minimum) dia Telephone cable of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc, and as per the detailed specification.(Note: Cable will be issued free of cost by the department). (Refer Sec VI, Clause No.3) |
| 165 | Above 20 Pair & Upto 50 Pair |
| 166 | Termination of the following sizes of PVC Sheathed, jelly filled, Flat/wire armoured PIJFUG Cable using Single Compression, Heavy Duty Gland connecting the cable to the equipment Telephone DBs etc. The rate shall include the cost of supply of Cable Gland. The Contractor shall arrange for drilling of holes wherever necessary for the completion of the work. (Refer Sec VI, Clause No.10.2). |
| 167 | Above 20 & upto 50 Pair |
| 168 | Wiring and termination for Telephone point with 1 Run of 0.5mm (minimum) dia, 250 V grade PVC insulated, twin twisted, two pair, tinned copper wire from Telephone Junction Box to Telephone points in concealed conduit/ PVC Trunking including supply of wire and 2 Nos. 1 module Jack type Telephone Socket with Shutter with Modular plate. (AECS Phase-II) (Refer Sec VI, Clause No.18) |
| 169 | Wiring and termination for Telephone point with 1 Run of 0.5mm (minimum) dia, 250 V grade PVC insulated, twin twisted, two pair, tinned copper wire from Telephone Junction Box to Telephone points in concealed conduit/ PVC Trunking including supply of wire and 2 Nos. 1 module Jack type Telephone Socket with Shutter with Modular plate.(AECS Phase-I) (Refer Sec VI, Clause No.18) |
| 170 | Wiring and termination for Telephone point with 1 Run of 0.5 mm (minimum)dia, 250 V grade PVC insulated, twin twisted, single pair, tinned copper wire from Telephone Junction Box to Telephone points in concealed conduit/ PVC Trunking including of supply of Telephone wire (Refer Sec VI, Clause No.18) |
| 171 | Wiring with 1 Run of Twin twisted, Double pair (1/0.5mm) (minimum) |
| 172 | Supply and installation of 8 Ways Brass Neutral Link, 8 Screw Terminal Grounding Bar Block for wire looping and earthing with P.B.T insulator Base. (Refer Section-V) |
| 173 | Supply and open installation of following Sizes of MS boxes as per the detailed specification. (Refer Sec VI, Clause No.15.10). |
| 174 | 600(W) x 400(H) x 200(D)mm, 1.8mm thick sheet MS Box |
| 175 | Supply and installation of following sizes of HDPE Pipes Direct in Ground. |
| 176 | Supply and installation of PLB 40/33mm HDPE Ducts including excavation for routing of Power /Telephone Cables as per the detailed specification. (Refer Sec VI, Clause No.4.1 & 4.2). |
| 177 | Supply and installation of following sizes of PLB HDPE pipes in Built-in -trench as per detailed specification. (Refer Sec VI, Clause No.4.1 & 4.3). |
| 178 | Supply and installation of 40/33mm HDPE Ducts in Built in trench for routing of Power /Telephone Cables as per the detailed specification. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Less (-) 0.0 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Government of IndiaDepartment of Atomic EnergyGeneral Services Organization Centralised Tender Cell TENDER DOCUMENT FOR Internal Electrification of AECS-IV Phase-2 and associated works in Anupuram Township. Tender No: GSO/CTC/ESD/350/2026 Part – II : Financial Bid (Section - VIII) INDEX S.No. Title Page No. |
| 179 | GENERAL INFORMATION FOR GUIDANCE OF TENDERERS |
| 180 | The schedule of quantities is to be read for the purpose of pricing in conjunction with the special conditions, general rules for the guidance of contractors, conditions of contract, specifications, scope of work (Section V), and General Specification (Section VI, VI MNC), drawings, schedule of supply of materials and the appendices for complete interpretation of this scope of work quantity wise. |
| 181 | The prices inserted in the schedule of quantities shall be inclusive of value of the work described including all cost and expenses, which may be required in and for the construction of the work described together with the general risks, liabilities and obligations not forth or implied in the documents on which the tender is to be based. |
| 182 | The quantities stated are to be considered approximate only and the unit prices entered in the schedule of quantities and prices shall apply only to the actual quantities measured in the completed work in accordance with the specifications. |
| 183 | Items of work described in brief are detailed under specification of Work.The scope of work will not be estimated from the brief description of this schedule. |
| 184 | Rate quoted must include all components required for meeting the specification and performance requirements of the item irrespective of whether they are specifically brought out in this schedule or not. |
| 185 | All the materials other than those shown in schedule of supply of materials in section VII are to be arranged by the contractor and his rates should account for the same. |
| 186 | Rates quoted for all items in this tender shall include cost of all materials. Department will not supply any materials other than materials stipulated in Section - VII of the tender and as such the rates quoted must be all inclusive. |
| 187 | If contractors need any clarification they are required to contact the ‘Head, CTC, GSO, Kalpakkam – 603 102, Chengalpattu district, Tamilnadu (Ph – 044 - 27481238 and 044-27480500 Extn. 84299,87345,85803,85532) during office hours. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender