Tender For Repair To Drain, Path, Culvert, Hardstanding & Other Misc B/R Works In Central Sector And Repair/Maint Of Security Wall, Compound Wall & Other Misc B/R Works To Certain Units Under Age B/R-I At Kota Mil Stn
Tender Value
80 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
4 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Drain, Path, Culvert, Hardstanding & Other Misc B/R Works In Central Sector And Repair/Maint Of Security Wall, Compound Wall & Other Misc B/R Works To Certain Units Under Age B/R-I At Kota Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82586/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: REPAIR TO DRAIN, PATH, CULVERT, HARDSTANDING & OTHER MISC B/R WORKS IN CENTRAL SECTOR AND REPAIR/MAINT OF SECURITY WALL, COMPOUND WALL & OTHER MISC B/R WORKS TO CERTAIN UNITS UNDER AGE B/R-I AT KOTA MIL STN CA NO: CWE/KOTA- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles. |
| 3 | M&L for Walling of random rubble uncoursed,well bonded bedded and solidly hearted built in CM 1:6 including finishing the joints, flush as the work proceeds complete. |
| 4 | M&L for Walling of random rubble uncoursed,well bonded bedded and solidly hearted built in CM 1:6 including finishing the joints, flush as the work proceeds but except stone complete all as specified as directed. |
| 5 | M&L for brick work with fly ash modular bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6). |
| 6 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses not exceeding 40mm depression complete all as specified. |
| 7 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 8 | M&L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. |
| 9 | M&L rendering 15 mm thick in CM 1:4 on on stone masonry surfaces finished even and smooth without using extra cement. |
| 10 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removal all rubbish material outside of MD Land complete all as specified and directed. |
| 11 | M&L providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate) in copings, kneelers, apex stones, bed plates, and the like including weathering, slightly rouinded for chamfered angles and throating,including necseeary formwork as directed. |
| 12 | M&L for preparation of newly plastered surfaces of wall and applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacescomplete all as specified and directed. |
| 13 | M/L Complete removal of existing treatment of old plastered surfaces of walls aand applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacescomplete all as specified and directed. |
| 14 | S&F 100 mm bore PVC (SWR) pipes single socketd, in any length with rubber ring joints laid in trenches or in floors as in weep holes complete all as specified & directed. |
| 15 | Dismantling of posts struts (wood, steel or RCC) any section incl taking out embedded portion in concrete or brick and making good. |
| 16 | Dismantling of old fencing wire/barbed wire, any type |
| 17 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50 m in hard/dense soil complete all as specifed and as directed. |
| 18 | M&L Plain Cement Concrete Type C2 1:3:6 using 40 mm graded stone aggrgate as in foundation filling and mass concrete complete all as specified and as directed. |
| 19 | S&F Mild steel work of angle iron or flat iron etc for railings, balusters, nosing to steps including embedding in concrete and screwing etc, flat iron for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290 complete all as specified and directed. |
| 20 | Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 21 | Supply only Chain Link MS galvanized fencing any size and any type complete all as specified and as directed |
| 22 | Fixing only Chain Link MS galvanized fencing including wires any mesh, size and any type of standards rails, straining bolts etc including provision of binding wires complete all as specified and as directed. |
| 23 | S&F Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured) including demolition of old barbed wire complete all as specified and directed. |
| 24 | Mild steel screw bolt 11 to 15 mm shank dia neck (machine made) with hexagonal or square head at one end and screws the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square not exc 5 cm long complete all as specified and as directed. |
| 25 | Dismantling wrought iron of mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 26 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 |
| 27 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed |
| 28 | M & L for preparation of old or previously treated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 29 | M&L preparation new or previously untreated steel surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed |
| 30 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 31 | M&L 450x300x7 mm thick glazed ceramic coloured tiles as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L 10 mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed by Engineer - in - Charge. |
| 33 | Supply and installation of cladage 6mm thick exterior grade UV protected for wall/ceiling G-Quality panels of standard size. Cladage interior panels are High-Pressure Laminates (HPL) as per EN-438-7, type EDF manufectured using patented Technology (NT), Panels are double hardened including acrylic polyurethane resin which is thermally cured under high pressure & high temperature. Termite free, water resistant. Explanation NT : Non fading High performance acrylic polyurethane surface technology.Installation of cladage Panels will be done by 40x40mm size square MS pipe pipe as per direction of Engr-in-Charge. Rate of MS pipe is included in quoted rate. Installation of cladage panels will be done using rear ventilated principles only which is ensured by providing 200 SQCM/ meter (For free flow of Air behind the facage) for the facade and using the framework with no horizontal section, complete all as specified and directed.MAKE : Oreo/ Alstone / Greenlam etc |
| 34 | M&L for polished plain acrylic sheet having thickness 2mm use in Italian / bold letters of use 450mm long and 60mm thick with LED dotted lights, fixed with SS Screw on ACP cladding all as specified and directed by Engr-in-Charge. |
| 35 | S & F in renewal of Stainless steel work in decorative type tubular pipe, chain and alphabet letter work/figure etc as required including all fixing arrangement complete all as specified and directed. |
| 36 | M&L providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) as in surface channels and drains complete all as specified and as directed. |
| 37 | M&L for Dismantling of reinforced concrete drain pipes, any dia jointed in cement mortar and taking out of trenches, if required complete all as specified & directed. |
| 38 | M&L for 300 mm dia Reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars all as specified & directed. |
| 39 | M&L for 450 mm dia Reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars all as specified & directed. |
| 40 | M & L for providing precast cement concrete 1:2:4 type B-1 (nominal mix) using 20mm graded crushed stone aggregate as in cover slab (for man holes etc) and the like and set in cement mortar 1:6 complete all as specified and directed. |
| 41 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slabs, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to TMT bars complete all as specified and directed. |
| 42 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material outside of MD Land complete all as specified and directed. |
| 43 | M &L 100 mm thick PCC (1 :4:8) type D2 using 40mm agg as in sub base |
| 44 | Dismentling of Stone slabs and tiles of any description or thickness infloors, aprons etc laid bedded and pointed in any mortar |
| 45 | M&L for Chequered cement concrete tiles 30cm X 30cm X30 mm thick, set and jointed in neat cement slurry in floor and pointed with grey cement and pigment complete all as specified & directed. |
| 46 | M&L Machine pressed precast concrete interlocking paver block glossy finish with grey cement and pigments any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade complete all as specified & directed. |
| 47 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 48 | M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified & directed. |
| 49 | Schedule of Credit Total in Figures 0.0 0.0 -174904.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus One Lakh Seventy Four Thousand Nine Hundred & Four Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender