Tender For Repair / Maintenance Of Comprehensive B/R Repairs Including Internal Wiring In Certain Md Accn And Otm Accn In Northern Sector And Central Sector At Kota Mil Stn
Tender Value
69.86 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
1 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Comprehensive B/R Repairs Including Internal Wiring In Certain Md Accn And Otm Accn In Northern Sector And Central Sector At Kota Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82585/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: REPAIR / MAINT OF COMPREHENSIVE B/R REPAIRS INCLUDING INTERNAL WIRING IN CERTAIN MD ACCN AND OTM ACCN IN NORTHERN SECTOR AND CENTRAL SECTOR AT KOTA MIL STN CA NO: CWE/KOTA- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Demolition of cement (un-reinforced) concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 3 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar |
| 4 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 5 | M&L for 450x350x7 mm thick glazed ceramic coloured tiles as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-Charge. |
| 6 | M & L for 25 mm thick PCC 1:2:4 type B-1, using 25 mm graded stone aggregate as in sub base of floors, surfaces finished fair and even complete all as specified and directed. |
| 7 | M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 8 | M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 9 | M&L for 10 mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed by Engineer - in - Charge. |
| 10 | M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 11 | M&L for non skid ceramic tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for non skid ceramic tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed by Engineer-in-Charge. |
| 13 | M & L for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base lad and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 14 | M & L for Machine cut Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 15 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 16 | M&L Green Marble of work 18 to 20mm thick (table rubbed and polished) in cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade. |
| 17 | Taking down existing roof treatment including lime concrete/PCC padding over roof, removing complete layer of bitumen under lime concrete/PCC padding, cement mortar & felt cleaning the surface by hacking to receive plaster and removing demolished material outside MD land complete all as specified and directed. |
| 18 | M &L for PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as spd and directed. |
| 19 | M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm complete all as specified and directed. |
| 20 | M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:3, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid As per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.(Note : Water proofing liquid shall be measured and paid separately) |
| 21 | Supply and fixing APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm , black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions complete all as specified and as directed.Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimum) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimney/other vertical surfaces and polymeric membrane inserted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate. |
| 22 | M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane , minimum 3 mm thick and weighing not less than 3.0 kg/ sqm , black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid separately |
| 23 | M&L PCC 1:5:10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors etc complete all as specified. |
| 24 | Supply only Integral water proofing Liquid |
| 25 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge. |
| 26 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge. |
| 27 | Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 |
| 29 | S&F 35mm thick factory made IInd Class Hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge |
| 30 | S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge.(Note :- S & F Glass/gauge shall be measured and paid for separately) |
| 31 | Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 32 | S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and as per specification & drawing as applicable to item 08100A given in SSR Part – II (2020). (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 33 | S&F for factory made 30mm thick 100 % solid factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EIC. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 34 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 35 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 36 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed. |
| 37 | S & F 150 mm long Aluminium tower bolts fixed complete all as specified and directed |
| 38 | S&F 150mm size aluminium handles, cast type anodized completed all as specified and directed. |
| 39 | S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F 100 mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type B-21 complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame. Fixed in repair complete all as spd & directed. |
| 42 | S&F 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 43 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm & fixed with tinned tacks or galvanized wire staples in door and steel window all as spd and directed |
| 44 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm & fixed with tinned tacks or galvanized wire staples in door and steel window all as spd and directed |
| 45 | S&F in repair aluminum door closer ( aluminum extruded section) hydraulically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg. |
| 46 | S&F Aluminium Mortice lock, vertical type, size 100 mm of 4 levers |
| 47 | Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips and fixing new ones complete all specified and as directed. |
| 48 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 49 | M&L for 4.0 mm thick sheet glass ordinary quality and glazing in aluminium frames in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 50 | S & F 3 mm thick figured glass pin head type and glazing with oil putty n exc 0.5 Sqm in each pane. |
| 51 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 53 | M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F Powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. NOTE : Powder coating should be of Black/Dark Brown colour |
| 55 | S & F aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. (Note :- 1. Wire cloth & Glass pane shall be measured and paid for separately) |
| 56 | S&F Anodized aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer in- charge. |
| 57 | Supply only 4.0 mm thick Sheet glass, ordinary quality and glazing in Aluminium windows completed all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates under respective items.) |
| 58 | M&L for Walling of random rubble uncoursed,well bonded bedded and solidly hearted built in CM 1:6 including finishing the joints, flush as the work proceeds complete all as specified as directed. |
| 59 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses not exceeding 40mm depression complete all as specified. |
| 60 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge. |
| 61 | M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed. |
| 62 | M&L for 15mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed. |
| 63 | M&L for rendering 10 mm thick in CM 1:3 as on concrete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 64 | M&L for preparing newly plastered surfaces and Providing and applying wall putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two or more coats of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. |
| 65 | M&L for preparation of newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 66 | M&L for Complete removal of existing treatment of old plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 67 | M&L for preparation of newly plastered surfaces & applying three coats of white wash on ceilings complete as spd & directed |
| 68 | M&L for preparing old surface of ceiling, plastered or unplastered & applying Two coat of white wash etc complete all as specified & as directed. |
| 69 | M&L for complete removal of existing treatment on walls, chhajja etc by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and preparation of old plastered surfaces and applying two coats of distemper oil emulsion white or tinted over and including 2mm thick wall care putty complete all as specified and directed |
| 70 | S & F of 18/19 mm thick Medium density fibre board exterior grade fixed to timber work with screw including 1 mm thick PVC EDGE being pasted to edges complete all as specified and directed by Engineer-in-Charge. |
| 71 | S & F 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified and directed |
| 72 | S & F brass alloy handle, fabricated type, 100 mm size, nickel chromium plated finish as per service grade number 2 of IS 1068: 1993 complete all as specified and as directed. |
| 73 | Dismantling boarding, any description, fixed in any position fixed with nails complete all as specified and directed by Engineer-in-Charge. |
| 74 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material outside of MD Land complete all as specified and directed. |
| 75 | M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection/path/paving laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed |
| 76 | M &L for 100 mm thick PCC (1 :4:8) type D2 using 40mm agg as in sub base |
| 77 | M&L for Sand filling under floors or in foundations including watering and consolidation . |
| 78 | M&L Machine Pressed precast concrete interlocking paver block glossy finish with grey cement and pigment any shape and size confirming to IS- 15658-2006 of 60 mm thickness M-35 grade. |
| 79 | M&L Pre-cast cement concrete block masonry with solid blocks Type B1 1:2:4 (20 mm graded aggregate, exc. 10 cm in width and setting in mortar, complete |
| 80 | M&L for Chequered cement concrete tiles 25cm X 25cm X25 mm thick, set and jointed in neat cement slurry in floor and pointed with grey cement and pigment complete all as specified & directed. |
| 81 | Demolition of RCC / PVC over head tank cap exc 250 ltrs & n.exc500 lts & removal of all retrieved material |
| 82 | Demolition of RCC / PVC over head tank cap exc 500 ltrs & n.exc1000 lts & removal of all retrieved material |
| 83 | Demolition of RCC / PVC over head tank cap exc 1000 ltrs & n.exc 2000 lts & removal of all retrieved material |
| 84 | S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. (Note : PVC tanks shall be ISI marked , white colour and having three layers) |
| 85 | S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. (Note : PVC tanks shall be ISI marked , white colour and having three layers) |
| 86 | S&F 2000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. (Note : PVC tanks shall be ISI marked , white colour and having three layers) |
| 87 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 88 | Taking up or down 15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge |
| 89 | Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge |
| 90 | S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 91 | S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 92 | Dismantling of 100mm bore cast iron drain pipe/PVC (SWR) pipes/RCC Pipes alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. |
| 93 | Dismantling of 75mm bore cast iron drain pipe/PVC (SWR) pipes/RCC Pipes alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed . |
| 94 | S&F PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed. |
| 95 | S&F100mm dia Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed. |
| 96 | S&F 75 mm dia Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed. |
| 97 | S&F cast iron 100mm bore bends any radius complete all as specified and directed. |
| 98 | S&F cast iron 75mm bore bends any radius complete all as specified and directed. |
| 99 | S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 100 | S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 101 | S&F in repairs chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed. |
| 102 | S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 103 | S&F in repair 15mm bore angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 104 | S&F in repair 15 mm dia stop cock fancy type, chromium plated with long shank and cup (concealed type)for iron pipe or for unions and fixed (set in CM 1:4). |
| 105 | S&F in 15mm bore Wall mixture chromium plated fancy type for wall in two/three pin fixed to iron pipe all as specified in CA complete all as specified and as directed. |
| 106 | S&F in repair 20mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 107 | S&F in repair bib taps 15mm bore cast copper alloy with crutch or butterfly handle, long body, screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 108 | S & F in repair vitreous china squatting pan \\" ORISSA PATTERN\\" of size 580mm x 440mm white with integral foot rest or back inlet incl PCC 1:2:4 type B-1 for making good the floor complete all as specified |
| 109 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with \\"P\\" or \\"S\\" Trap front or back inlet fixing bolts, PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and making all necessary connection complete as directed. |
| 110 | S&F in repair 15mm bore WHB mixture valve single Lever chromium plated fancy type centre hole fixed to iron pipe complete all as specified and as directed. |
| 111 | S&F in repair, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed . |
| 112 | S&F in repair, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including CI brackets all s directed. |
| 113 | S&F in repair pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 114 | S&F in repair grating round 100 mm size of PTMT. (Minimum weight 50gms) |
| 115 | S&F in repair 600 x 450mm beveled edge mirror 5.5 - 6mm thick selected quality glass flaw less, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified & directed. |
| 116 | S&F in repair shower rose 125 mm size brass chromium plated with swivel joints including fixing steel pipe or unions complete all as specified and directed |
| 117 | S&F in repair toilet paper holder of steel chromium plated with CP brass screw |
| 118 | S&F in repair Soap dish, Stainless steel, embedded in the wall approximate size 160x160x90mm complete all as specified and directed. |
| 119 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 120 | S&F vitreous china Urinal white, half stall type excluding waste coupling and waste pipe. |
| 121 | S&F Urinal Spreader of PTMT White colour fixing to 15 mm bore pipe. |
| 122 | Cleaning and removing all scale and dirt, etc. from PVC/RCC tanks Exc 250 but not exc 500 ltr capacity and from mouths of circulating pipes, complete all as specified and directed by Engineer-in-Charge |
| 123 | Cleaning and removing all scale and dirt, etc. from PVC/RCC tanks Exc 500 but not exc 1000 ltr capacity and form mouths of circulating pipes, complete all as specified and directed by Engineer-in-Charge |
| 124 | S&F in repair harrison rails/curtain rod 25 mm dia stainless steel chromium plated including brackets fixed with brackets complete all as directed. |
| 125 | Resecuring or easing and adjusting without taking down shutter of any description exc 1.0 sqm and not exc 2.0 sqm each, complete all as specified and directed |
| 126 | Resecuring or easing and adjusting without taking down shutter of any description and re-fixing in same opening not exc 1.0 sqm each complete all as specified and directed. |
| 127 | Dismantling wrought iron or mild steel work of any description |
| 128 | S&F roof trusses (Framed), trussed, purlins,crane gantries , rail and fastenings and heavy bracket framing (post, beam, tee, angle, channel or flat section) including distance pieces, cleats etc confirming Fe 410-W (Gde E-250 quality B) all as specified and directed. |
| 129 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed . |
| 130 | S&F for Welded steel wire fabric (Weight per square metre N exc 4kg) to steel members complete all as specified and directed by Engineer-in-Charge. |
| 131 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering |
| 132 | S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 133 | Taking Down Wall panelling and similar work complete all as specified and directed. |
| 134 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 135 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 136 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge. |
| 137 | S&F for anodized aluminium snap grid frame work for false ceiling including hanging 6mm dia (upto 1200mm length), adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long complete all as specified and directed. |
| 138 | S&F for 6mm thick non asbestos fibre cement building fixed or laid / inserted to timber/GI aluminium framework with screw fixed in ceiling complete all as specified and directed. |
| 139 | Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified. |
| 140 | M&L for Reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as in chajjas and the like, all as specified and directed by Engr-in-Charge. |
| 141 | Use and waste of formwork to chullah hoods,chajjas,troughs and similar items including edges for fair finished surface of concrete, all as specified . |
| 142 | M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 143 | S & F stack clamps made of flat iron 20x5 mm with iron rod of 16 mm dia for bore of pipe 100 to 110 mm fixed to walls with nails of suitable sizes complete all as directed |
| 144 | S & F stack clamps made of flat iron 20x5 mm with iron rod of 16 mm dia for bore of pipe 75 mm fixed to walls with nails of suitable sizes complete all as directed |
| 145 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc |
| 146 | Dismantling unserviceable main switch/DBs incl wooden board and deposit to MES store yard including making good disturbed surface of wall. |
| 147 | Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces. |
| 148 | M & L for Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable FRLS of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box/modular box of 1.2 mm thick and phenolic laminated sheet cover 3.0 mm thick and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified .Note : Cutting chases (if required) and making good to match with the adjoining surface shall be included in the unit rate. for following point wiring :-(a) One light point controlled by one, one way switch |
| 149 | Description all as per Item No 147.00 above but One ceiling /exhaust fan point controlled by one switch, Note : - Rate shall be included for connection of ceiling rose to fan by using 3 core flexible copper wire in white colour. |
| 150 | Description all as per Item No 147.00 above but One 3 pin 5 amp socket out point on the same board with other switches. |
| 151 | Description all as per Item No 147.00 above but One 3 pin 5 amps socket out let point on independent board |
| 152 | Description all as per Item No 147.00 above but One bell/buzzer point controlled by one bell push. |
| 153 | Description all as per Item No 147.00 above but One light point controlled by two 2-way switches |
| 154 | Description all as per Item No 147.00 above but one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire. |
| 155 | Supply and fixing switch piano flush type 5A, SP one way. |
| 156 | Supply and fixing switch socket combination, 5 and 15 Amps, 230 volt, multi pin, flush type universal all as specified |
| 157 | S&F switch piano flush type 5 A 2 way all as directed |
| 158 | S&F Socket outlet 5 Amp all as specified and directed. |
| 159 | S&F Switch Flush type 15 Amps |
| 160 | S&F Socket Flush type 15 Amps |
| 161 | Supply and fixing switch socket combination, 5 Amps, 230 volt, multi pin, flush type universal all as specified |
| 162 | M&L for Concealed Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable FRLSH of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in PVC medium grade concealed conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and phenolic laminated sheet cover 3.0 mm thick/ PVC board of suitable modules for mounting of switches & sockets and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified .Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate. for following point wiring :-(a) One light point controlled by one, one way switch |
| 163 | Description all as per Item No 161.00 above but One ceiling /exhaust fan point controlled by one switch and regulator, Note : - Rate shall be included for connection of ceiling rose to fan by using 3 core flexible copper wire in white colour complete all as directed and specified. |
| 164 | Description all as per Item No 161.00 above but One 3 pin 5 amp socket out point on the same board with other switches. |
| 165 | Description all as per Item No 161.00 above but One 3 pin 5 amps socket outlet point on independent board |
| 166 | Description all as per Item No 161.00 above but One light point controlled by two 2-way switches |
| 167 | Description all as per Item No 161.00 above but one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire. |
| 168 | S&F of Switch one way 6 Amps, 1 module 240 V complete all as specified and as directed. |
| 169 | S&F socket 3 pin 5 Amps 240 V flush type complete all as specified and as directed. |
| 170 | Supply & Fixing socket outlet, 5/6 and 15/16 Amps, 230 volts, multi pin, universal, ISI marked, 2 module, complete all as specified and directed. |
| 171 | Supply & Fixing switch 15/16 Amps, 230 volts, single pole, one way, ISI marked, 1 module, complete all as specified and directed. |
| 172 | Supply & Fixing type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed. |
| 173 | Supply & Fixing of bell push piano, flush type 5/6 Amps, 230 volts AC, single pole, complete all as specified and directed. |
| 174 | S & F in replacement switch socket combination, with Enclosure box PVC material, 5/6 Amps, 230 volt, multi pin, flush type, universal, ISI marked, complete all as specified and directed. |
| 175 | S & F in replacement switch socket combination, 5/16 Amps, with Enclosure box PVC material 230 volt, multi pin, flush type universal, ISI marked, complete all as specified and directed. |
| 176 | S&F in replacement of modular Switch one way 6 Amps, 1 module 240 V complete all as specified and as directed. |
| 177 | S&F modular socket 3 pin 5 Amps 240 V flush type complete all as specified and as directed. |
| 178 | Supply & Fixing in replacement of modular type socket outlet, 5/6 and 15/16 Amps, 230 volts, multi pin, universal, ISI marked, 2 module, complete all as specified and directed. |
| 179 | Supply & Fixing in replacement of modular type switch 15/16 Amps, 230 volts, single pole, one way, ISI marked, 1 module, complete all as specified and directed. |
| 180 | Supply & Fixing in replacement of Modular stepped type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed. |
| 181 | Supply & Fixing in replacement of modular bell push piano, flush type 5/6 Amps, 230 volts AC,single pole, complete all as specified and directed. |
| 182 | S&F Lamp Holder(ISI Marked) PVC/Polycarbonate type with back plate suitable for batten fittings, Make : |
| 183 | S&F Ceiling rose, surface Bakelite 65x50 mm three terminal |
| 184 | S&F Call bell AC-230 Volt single pole ding dong |
| 185 | S&F bell push piano flush type 5A |
| 186 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc all as directed |
| 187 | S&F modular metal flush box 8 module |
| 188 | S&F modular metal flush box 6 module |
| 189 | S&F modular metal flush box 4 module |
| 190 | S&F modular metal flush box 3 module |
| 191 | S&F modular metal flush box 1//2 module |
| 192 | S&F White cover plate with frame 8 module |
| 193 | S&F White cover plate with frame 6 module |
| 194 | S&F White cover plate with frame 4 module |
| 195 | S&F White cover plate with frame 3 module |
| 196 | S&F White cover plate with frame 1/2 module |
| 197 | S&F Sub main wiring power/circuit using FRLSH PVC insulated unsheathed, stranded copper conductor cable 2 runs of size 6.00 Sqmm, earth continuity conductor of size 6.00 Sqmm to be drawn through and including PVC conduit 20 mm dia concealed in walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 6.00 sqmm and one wire of 6.0 sqmm and one run of PVC conduit shall be measured as one unit. |
| 198 | Description all as per Item No 196.00 above but size of cable 4.00 Sqmm |
| 199 | S& F of LED flexible premium rope light of CL/WW light having not less than 120LED/Mtr along with adoptors,IP65 as per site requirement incl fixing with necessary PVC tags, clips complete all as specified and directed. |
| 200 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 201 | S & F in replacement decorative wall mounting light fixture suitable for 9 to 12 watt including LED lamp/bulb B22 base connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Note: Contractor shall submit the samples of lights and get it duly approved by Garrison Engineer. |
| 202 | Supply and fixing round/flat shape up to capacity 15 Watt, 220 volts ,AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof/wall ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 203 | Supply and fixing in replacement Emergency LED fittings ,4 feet long, 20 watt, 240 Volts, integrated LED batten ,230volt, ,minimum backup 3 hours of battery backup with all accessories powder coated steel with internally pre wired and including connecting up to ceiling rose including dismantling / taking down serviceable fitting any type all as specified and directed. |
| 204 | S&F in replacement 20 watt LED light fitting with aluminum housing complete all as specified and directed. |
| 205 | S&F in replacement of 10 watt LED light batten fitting 2 feet in length complete all as specified and directed. |
| 206 | Supply and fixing LED Bldg light 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, along with GI bracket1.2 Mtr with 120 degree angle bending position fixed with clamps with complete with IP 65/66 protection complete all as specified and directed. |
| 207 | S&F MCCB VTPN DB vertical type made of sheet steel, phosphatised powder painted, with neutral bus bar 200 A, neutral link, IP-43-IK09 protection grade, 415 Volts AC, TPN with 6 way, Double door, including one MCCB FP 200 Amps, 16 KA 415 volts as incomer with adjustable thermal and magnetic release complete all as specified and directed. |
| 208 | Supply and fixing MCB TPN DB made of sheet steel phosphatised, powder painted with neutral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door complete all as specified and as directed. |
| 209 | M&L for MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 415Volts SPN with 08 way Double door all as specified & directed. |
| 210 | Supply and fixing SPN 32 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning of SPN 32 Amps. |
| 211 | Supply and fixing rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning of SP 6 to 32 Amps. |
| 212 | Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning of TPN 63 Amps. |
| 213 | Supply and fixing in renewal exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 MM all as specified and directed.Note:- Old Unsv Exhaust Fan shall be deposited to E/M Store Yard. |
| 214 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp. |
| 215 | Schedule of Credit Total in Figures 0.0 0.0 -160889.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus One Lakh Sixty Thousand Eight Hundred & Eighty Nine Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender