Tender For Welcome Maintenance And Repair To Kitchen Cabinates, Cupboards, Windows, Toilet Repair And Other Misc B/R Works To Offrs Md Accn In Manekshaw Marg, Urban Village, Cassel Road Etc In The Aor Of Age B/R-I Under Ge (East) Delhi Cantt-10
Tender Value
49.95 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
20 days left
EMD
99900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance And Repair To Kitchen Cabinates, Cupboards, Windows, Toilet Repair And Other Misc B/R Works To Offrs Md Accn In Manekshaw Marg, Urban Village, Cassel Road Etc In The Aor Of Age B/R-I Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of old decorated brick/concrete /plastered/un-plastered surfaces of walls, pillers, cornices etc by washing, brooming & rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including removing the nails etc and cracks/holes in surface filling with white putty and sanding, surface free from dust, loose paint etc complete all as specified and directed. |
| 2 | Description all as per Srl Item No 1 above but on celling suraface etc complete all as specified and directed. |
| 3 | M & L for applying for 1 mm average thickness wall care putty on internal wall/ceiling surface any type and sanding the putty surface thus prepairing surface even and smooth to recieve further finishes complete all as specified and all as directed. |
| 4 | M & L for applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, applied over a coat of primer and all coat applying with roller brush on internal wall/ceiling surface, complete all as specified and directed by Engineer-in-Charge. |
| 5 | M & L for applying one coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including applying with roller brush on internal wall/ceiling surface, complete all as specified and directed by Engineer-in-Charge. |
| 6 | M & L for applying two coats of oil bound distemper on internal wall/ceiling surface of required shade and colour complete, as per manufacturer's specification and using roller brush, complete all as specified and directed by Engineer-in-Charge |
| 7 | M & L for applying one coats of oil bound distemper on internal wall/ceiling surface of required shade and colour complete, as per manufacturer's specification and using roller brush, complete all as specified and directed by Engineer-in-Charge |
| 8 | M & L for complete removal of existing treatment from internal surfaces of wall/ceilling by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying uniform thickness (avg 2mm thick) wall care putty on internal surfaces of wall/ceilling including preparaing the surface even and smooth by sander machine etc and providing two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, applied over a coat of primer and all coat applying with roller brush, complete all as specified and directed by Engineer-in-Charge |
| 9 | M & L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed. |
| 10 | M & L for preparation of old Steel and Iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed. |
| 11 | Material and labour for Writing letters or figures (Block. Roman, Italic or Indian) not exc. 30 cm high ® PER 10 NOS complete all as specified and directed by Engineer-in-Charge |
| 12 | Material and labour for Stops, commas, short lines, dashes, hyphens, brackets, etc. complete all as specified and directed by Engineer-in-Charge |
| 13 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed. |
| 14 | Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed. |
| 15 | Taking down shutters of any description exceeding 2.00 Sqm each complete all specified and directed. |
| 16 | Refixing doors shutters in same opening any description not exc 2.0 sqm. complete all specified and directed. |
| 17 | Refixing doors shutters in same opening any description exc 2.0 sqm. complete all specified and directed. |
| 18 | S&F flush door shutter 30 mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed. |
| 19 | S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats |
| 20 | S&F Plain framed panelled shutters of second class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed. |
| 21 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm prelam coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 22 | S & F of factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam coloured PVC Sheet on both face, supplying & fixing in frame at site as per secification & drawing |
| 23 | S & F anodised aluminium frame for doors, windows, ventilators, partations etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 24 | S & F anodised aluminium door shutters, poweder coiating of any colour aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 25 | S & F Anodised aluminium window and ventilator shutters, poweder coiating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 26 | M&L Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated frames sliding track, bottom , sides and top weighing not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, including taking down old existing window complete all as specified and as directed. |
| 27 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 4.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge.(Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 28 | S & F in repair 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations, fixed with SS screws to hinges and timber/steel frame work for kitchen cupboards, shelves, including tape on edge's & including frame work etc including taking down old any type cupboards, shelves etc all as specified and directed. |
| 29 | M & L for Fabrication & fixing to Modular kitchen cabinate/ wardrobe/ cupboard made out of 17/18 mm thick HDHMR boards with glossy/maat colour laminate sheet on front face and white laminate on other face of approved quality and texture on all front shutters & exposed sides with edge band including providing cabinet for keeping baskets/ drawers, including and fixing auto hinzes, modular G/C/J profile handls etc. and including taking down old any type cupboards, shelves etc all as specified and directed. (Design and pattern as approved by GE). (Make :Action tesa or equivalent) |
| 30 | M & L for Fabrication & fixing to 10-12 mm thick HDHMR boards with white laminated colour on both sides, fixing in Modular wardrobe, cupboard partitions, bottom, back side etc of Modular kitchen cabinet & wardrobe/ cupboard including taking down old any type cupboards, shelves etc all as specified and directed. (Make :Action tesa or equivalent) |
| 31 | S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 32 | S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 33 | S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed. |
| 34 | S & F in repair 250 mm long Stainless steel bright polished sliding door bolts, plate type, stove with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to door complete all as specified and as directed |
| 35 | S & F 150 mm size Stainless steel bright polished barrel tower bolts,for doors with bright bolt |
| 36 | S & F 100mm size butt hinges stainless steel complete all as specified and as directed. |
| 37 | S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed |
| 38 | S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 39 | S & F 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed |
| 40 | S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed. |
| 41 | Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads. |
| 42 | S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square not exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 43 | S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square not exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 44 | S & F 4 mm thick sheet glass , ordinary quality and glazed with oil putty in square not exc 1 Sqm in each pane fixed complete all as specified and directed. |
| 45 | S & F 8 mm thick sheet glass , ordinary quality and glazed with oil putty in square not exc 2 Sqm in each pane fixed complete all as specified and directed. |
| 46 | S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 47 | S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 48 | M&L for repair to existing steel rolling shutters by repairing/welding/oiling/greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs complete all as spd and directed. |
| 49 | Providing services on related to welding & black smith work for reapir to steel windows, shutters , grills , doors , rolling shutters, and other steel works etc including taking down, easing and refixing in the same position as required etc complete all as specified and directed. Note- (1).The above task shall be carried out by deploying minimum 01 welder having black smith skills on day basis From 900 hrs to 1700 Hrs.(2) In case contractor fails to complete the above task as per scheduled programme a damage of Rs 1000/- per day shall be deducted from his payment.3) Necessary T&P, ladders,minor consumable viz welding rods/extras, welding machine , equipments and safety gear shall be provided by the contractor.4) All replacement material/ accessories/Items as required shall be issued from MES store to complete the task and dismantled old unserviceable material shall be deposited to MES store yard.(5) The above work /task will also include for High rise bldgs and shaft area of high rise bldgs. |
| 50 | M&L for Coloured Glazed ceramic tiles/ vitrified tiles in floor / wall, reapir in patches, area not exc 5 sqm including taking down and removing and cleaning old tiles, preparing beds and laying or setting, jointing with matching new tiles with existing tiles over backing coat of 10mm thick rendering CM (1:4) as approved by Engr-in-Charge, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | M&L for Coloured Glazed ceramic tiles/ vitrified tiles in floor / wall, reapir in patches, area not exc 5 sqm including taking down and removing and cleaning old tiles, preparing beds and laying or setting, jointing with matching new tiles with existing tiles over backing coat of 10mm thick rendering CM (1:4) as approved by Engr-in-Charge, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender