Tender For Construction Of Weighing Bridge Machine (Capacity-60Mt) With Road Pathway (120 Mtr) And Single Room (15X10ft) Under Ge E/M Lucknow.
Tender Value
38 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
3 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Weighing Bridge Machine (Capacity-60Mt) With Road Pathway (120 Mtr) And Single Room (15X10ft) Under Ge E/M Lucknow.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8 type D-2 as in foundation and mass concrete using 40 mm graded stone aggregates complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed. |
| 5 | Removing excavated material n. exc. 50 m and depositing where directed at a level n.exc 1.5m complete all as specified and directed. |
| 6 | M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and directed. |
| 7 | M&L for reinforced cement concrete (Nominal mix) 1:2:4 type B-1 (20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 8 | M&L for reinforced cement concrete (Nominal mix) 1:2:4 type B-1 (20mm graded stone aggregate) in Columns, pillars, piers, posts and struts and mass concrete complete all as specified and directed. |
| 9 | M&Lfor reinforced cement concrete (Nominal mix) 1:2:4 type B-1 (20mm graded stone aggregate) in Beams, cantilevers, bressummers and mass concrete complete all as specified and directed. |
| 10 | M&L for RCC (1:2:4) type B-1 ( using 20mm graded stone aggregete) as in slabs supported on walls and the like complete all as specified and directed. |
| 11 | M & L for formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed. |
| 12 | M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified. |
| 13 | M & L for formwork to small surfaces such as cantiliver ends, brackets, ends of steps, caps and bases of pilasters and the columns and the like complete all as specified. |
| 14 | M & L for form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 15 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia. |
| 16 | S&F TMT bars 5mm and over upto 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia. |
| 17 | M&L for Rolled mild steel in roof trusses (framed), trussed, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 19 | M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed . |
| 20 | M&L for rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces, finishing the surface even and smooth without using extra cement (Note: Water proofing compound shall be measured and paid seprately) complete all as specified and directed . |
| 21 | M&L for rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed . |
| 22 | Supply only water proofing compound of approved quality complete all as specified and directed . |
| 23 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer over and including 2mm to 3 mm thick wall care putty complete all as specified and directed . |
| 24 | M&L for preparation of new plastered surafce of walls and applying two coats exterior emulsion weather coat paint of make Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) over one coat primer including 1 mm thick wall care putty complete all as specified and directed. |
| 25 | M&L for Hardcore of gauge n exc. 63 mm, of broken bricks, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed . |
| 26 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as plinth protection/path and the like complete all as specified and directed . |
| 27 | M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg, as in florring, finished even and smooth without using extra cement complete all as specified and directed . |
| 28 | M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone agg, as in florring, finished even and smooth without using extra cement complete all as specified and directed . Please Enable Macros to View BoQ information |
| 29 | M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone agg, as in florring, finished even and smooth without using extra cement complete all as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender