Tender For special Repair Of Bldg No T-159 (Civ Staff) In repair of Ge Kargil And T-37 (Or Living) In repair of 17 Madras Under Ge Kargil
Tender Value
15.18 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
19 days left
EMD
31000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No T-159 (Civ Staff) In repair of Ge Kargil And T-37 (Or Living) In repair of 17 Madras Under Ge Kargil
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed by the Engg-in-Charge. |
| 2 | S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and directed by the Engg-in-Charge. |
| 3 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in ceiling or sloping portion complete all as specified and directed by the Engg-in-Charge. |
| 4 | Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F second clas soft wood fillets square or rectangular in section sectional area exceeding 13sqcm and nexc 25sqcm as in scantling secured with nails or brads complete all as specified and directed by the Engg-in-Charge. |
| 6 | S&F second class softwood fillets square, rectangular or triangular in section sectional area not exceeding 3sqcm clean sawn, secured with nails or brads bullnosed, splayed, chamfered or rounded on one edge or face as in cover fillets complete all as specified and directed by the Engg-in-Charge. |
| 7 | S&F second class softwood moulding as in cornices, picture rails and the like sectional area not exceeding 6 Sqcm fixed with nails complete all as specified and directed by the Engg-in-Charge. |
| 8 | M&L for preparing old steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed by the Engg-in-Charge. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by the Engg-in-Charge. |
| 10 | M&L for colored joint free Non - skid Ceramic tiles 9 to 10mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed by the Engg-in-Charge. |
| 11 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square / rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and set and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15 thick screed bed in CM (1:6) complete all as specified and directed by the Engg-in-Charge. |
| 12 | M&L for Glazed ceramic coloured tiles of size 450x300x7mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for 25mm thick PCC 1:2:4. type B-0 (using 12.5mm graded aggregate) as subbase to floor tiles or similar works complete all as specified and directed by the Engg-in-Charge. |
| 14 | M&L for prepration of old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed by the Engg-in-Charge. |
| 15 | Demolition Cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed by the Engg-in-Charge. |
| 16 | M&L for 100mm thick PCC (1:3:6) type C2 as in sub base to floor or similar works complete all as specified and directed by the Engg-in-Charge. |
| 17 | Demolition of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified and directed by the Engg-in-Charge. |
| 18 | M&L for Precast cement concrete Type C1 (1:3:6) (using 20mm graded crushed stone agg) block masonary with solid blocks exc 10cm in width and setting in CM 1:4 complete all as specified and directed by Engr-in charge. |
| 19 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finishing of surface even and smooth with out using extra cement complete all as specified and directed by the Engg-in-Charge. |
| 20 | S&F solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as specified and directed by the Engg-in-Charge. |
| 21 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing complete all as specified and directed by the Engg-in-Charge. |
| 22 | S&F 75mm butt higes medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed by the Engg-in-Charge. |
| 23 | S&F 100mm long aluminium anodized, barrel tower bots extruded section & fixed complete all as specified and directed by the Engg-in-Charge. |
| 24 | S&F aluminium handles cast type anodised size 100mm complete all as specified and directed by the Engg-in-Charge. |
| 25 | Taking down Chowkhats or frames n exc 1.5sqm with shutters (without taking off shutters from the frames) complete all as specified and directed by the Engg-in-Charge. |
| 26 | Taking down Chowkhats or frames exc 1.5sqm but nexc 4sqm with shutters (without taking off shutters from the frames) complete all as specified and directed by the Engg-in-Charge. |
| 27 | S&F 2nd class soft wood Plain, solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by the Engg-in-Charge. |
| 28 | S&F 30mm second class soft wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F 30mm second class soft wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by the Engg-in-Charge. |
| 30 | M&L for preparation of new wooden surfaces of any dscription over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by the Engg-in-Charge. |
| 31 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified and directed by the Engg-in-Charge. |
| 32 | S&F 100mm but hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed by the Engg-in-Charge. |
| 33 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300mm long complete all as specified and directed by the Engg-in-Charge. |
| 34 | S&F 150mm long alluminium anodized, barrel tower bolts extruded section & fixed complete all as specified and directed by the Engg-in-Charge. |
| 35 | S&F aluminium handles cast type anodised size 150mm complete all as specified and directed by the Engg-in-Charge. |
| 36 | M&L for prepration of new wooden surfaces of any description, not otherwise descri-bed over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by the Engg-in-Charge. |
| 37 | S&F in repair curtain rails anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by the Engg-in-Charge. |
| 38 | Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed. |
| 39 | S&F sheet glass 3mm thckness pin headed type and glazing with oil putty n exc 0.5 Sqm in each pane complete all as specified and directed by the Engg-in-Charge. |
| 40 | S&F in repair 15mm bore PVC connection 600mm long both ends screwed with brass cap complete all as specified and directed by the Engg-in-Charge. |
| 41 | S&F in repairs bib tap 15mm bore chromium plated copper alloy with crutch or butterfly handle screwed donw screwed for iron pipe or brass ferrule complete all as specified and directed by the Engg-in-Charge. |
| 42 | S&F in repairs Stop valves/Angle Cock cast copper alloy, screw down high pressure with crutch or butterfly handly for 15mm bore pipe complete all as specified and directed by the Engg-in-Charge. |
| 43 | S&F in repair pillar tap 15mm bore chromium plated screwed down, thigh pressure with or without lettered (hot or cold) with long screwed shkes and fly nuts scrrewed for inor pipe complete all as specified and directed by the Engg-in-Charge. |
| 44 | S&F in repair brass CP tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed by the Engg-in-Charge. |
| 45 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20mm dia pipes complete all as specified and directed. |
| 46 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 25 mm dia pipes complete all as specified and directed. |
| 47 | S&F 25mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by the Engg-in-Charge. |
| 48 | All as per Srl item No.47 above but 32mm outer diameter complete all as specified and directed by the Engg-in-Charge. |
| 49 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by the Engg-in-Charge. |
| 50 | S&F in repairs vitreous china wash hand basin (flat black) white of size 550x400mm with pedestal excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified and directed by the Engg-in-Charge. |
| 51 | S&F in repairs 32mm dia Waste coupling of CP brass for WHB including waste pipe complete all as specified and directed by the Engg-in-Charge. |
| 52 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device to be approved by Engr in Charge, complete all as specified and directed. |
| 53 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed by the Engg-in-Charge. |
| 54 | S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by the Engg-in-Charge. |
| 55 | M&L PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed by the Engg-in-Charge. |
| 56 | Taking down PVC pipe, eaves and gutters (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by the Engg-in-Charge. |
| 57 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by the Engg-in-Charge. |
| 58 | S&F 110mm bore PVC (SWR) bends with oval access door any radius complete all as specified and directed by the Engg-in-Charge. |
| 59 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by the Engg-in-Charge. |
| 60 | S&F Angle Iron (and FI, staging for water tank and the like including caps bases splices etc built up from two or more beam or channel section angle with plate including all lattice bars stiffenes gusset plate etc (Fe-290quality A) complete all as specified and directed by the Engg-in-Charge. |
| 61 | M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of red-oxide primer including preparation of surface complete all as specified and directed by the Engg-in-Charge. |
| 62 | Dismantling water storage tanks of capacity exc 500 & nexc 1000 ltrs and removing to store complete all as specified and directed by the Engg-in-Charge. |
| 63 | S&F rotational moulded polytheline water storage tank 1000 Ltrs capacity (cylinercial/vertical with closed top) hoisted and fixed in position complete all as specified and directed by the Engg-in-Charge. |
| 64 | S&F 110mm bore PVC (SWR) 'P’ trap complete all as specified and directed by the Engg-in-Charge. |
| 65 | Dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings complete all as specified and directed by the Engg-in-Charge. |
| 66 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engg-in-Charge. |
| 67 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engg-in-Charge. |
| 68 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by the Engg-in-Charge. |
| 69 | M&L for 75mm thick PCC 1:3:6. type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or similar works complete all as specified and directed by the Engg-in-Charge. |
| 70 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by the Engg-in-Charge. |
| 71 | M&L for hardcore with broken stone or boulders of guage exc 63mm but nexc 100mm deposited, spread and levelled in layers n exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by the Engg-in-Charge. |
| 72 | M&L rendering 15mm thick cement plaster in cement mortor (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all as specified and directed by the Engg-in-Charge. |
| 73 | M&L for two coats of Oil bound distemper on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed by the Engg-in-Charge. |
| 74 | M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed by the Engg-in-Charge. |
| 75 | S&F 35mm thick second class softwood (KAIL) Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by the Engg-in-Charge. |
| 76 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by the Engg-in-Charge. |
| 77 | S&F anodised aluminium barrel tower bolt extruded sections 150 mm size complete all as specified and directed by the Engg-in-Charge. |
| 78 | S&F in repair Harrison rails anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by the Engg-in-Charge. |
| 79 | M&L for Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc. |
| 80 | M&L for Point wiring for light/fan with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point controlled by one switch. |
| 81 | All as per Srl item No.66 here in before but for one 3 pin 5 Amps socket outlet on same board. |
| 82 | All as per Srl item No.66 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board. |
| 83 | All as per Srl item No.66 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board. |
| 84 | S&F Switch piano flush type 5 Amps, single pole one way complete all as specified and directed by the Engg-in-Charge. |
| 85 | S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type complete all as specified and directed by the Engg-in-Charge. |
| 86 | S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type complete all as specified and directed by the Engg-in-Charge. |
| 87 | S&F Socket Outlet 2 in 1, 5 Amp flush type complete all as specified and directed by the Engg-in-Charge. |
| 88 | M&L of ceiling rose on PVC square blocks surface bakelite 3 terminal complete all as specified and directed by the Engg-in-Charge. |
| 89 | S&F in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engg-in-Charge. |
| 90 | S&F LED lights fitting, surface mounting general purpose ultra slim economical LED batten of 1x 18W, lumen out put 100lm/wattt, CCT:6500K/3000K , PF>0.9, in extruded PC housing and round/square shaped diffuser including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by the Engg-in-Charge. |
| 91 | S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required complete all as specified and directed by the Engg-in-Charge. |
| 92 | S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing complete all as specified and directed by the Engg-in-Charge. |
| 93 | S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required complete all as specified and directed by the Engg-in-Charge. |
| 94 | S&F in replacement 240V, 10KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing complete all as specified and directed by the Engg-in-Charge. |
| 95 | S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 6 to 32 Amp in the MCB DB complete with connection testing complete all as specified and directed by the Engg-in-Charge. |
| 96 | S&F LED flood light 70watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete including connecting to to celling rose with suitable size cable complete all as specified and directed by the Engg-in-Charge. |
| 97 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, Copper winding of sweep 250 mm including making arrangement for fixing complete all as specified and directed by the Engg-in-Charge. |
| 98 | M&L for submain wiring comprising single core 2 Runs of 6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 2mm thick PVC Casing Caping ISI Marked(heavy duty) and its fittings on surface/recessed complete including 1X6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS including taking down old UNSV submain wiring and making good the disturbed surface complete all as specified and directed by Engr-In-charge.(Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) |
| 99 | M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel and connected to main switch board or equipment, including watering arrangement with GI medium grade 20mm bore watering pipe with funnel and wire mesh with PCC chamber CI cover with frame including 15mm dia GI pipe light grade for protection of earthing lead etc including necessary excavation in any type of strata, returning, filling, removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I, connected to earthing test point all as specified or indicated including testing on completion.Notes : (i) Earth continuity conductor including protection pipe upto 7.5 meters from earth electrode will be include in unit rate,(ii) Arrangement for earth resistance test should be carried out by the contractor. No extra payment shall be provided for the same. |
| 100 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sq. mm 2 core complete all as specified and directed by the Engg-in-Charge. |
| 101 | Note : Deduction for amount of Rs. 38,299.70 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender