Tender For Certain Repair/ Replacement To Doors, Windows And Ventilation And Kitchen Cabinets Etc Aor Under Age B/R-I Of Ge (East) Jrc (Tender Id No 2026_Mes_786440_1)
Tender Value
40 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair/ Replacement To Doors, Windows And Ventilation And Kitchen Cabinets Etc Aor Under Age B/R-I Of Ge (East) Jrc (Tender Id No 2026_Mes_786440_1)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each of any type steel/wooden all as specified. |
| 2 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm and not exc 4 Sqm each of any tpye steel/wooden all as specified. |
| 3 | Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each |
| 4 | S&F factory made 35mm thick IInd class hard wood plain framed paneled shutters with (2 panel ) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified. |
| 5 | S&F factory made 35mm thick glazed and skelton shutters open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a). |
| 6 | S&F 30mm thick flush shutter, solid core construction, with block board core and ply wood face pannel, commercial type both sides complete all as specified. |
| 7 | S&F factory made, solid panel PVC door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing. |
| 8 | S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing. |
| 9 | S & F for powder coated (50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.. |
| 10 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, sliding windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge |
| 11 | M&L for Mortice lock, vertical type, size 100mm 4 lever Brass body fixed in repair, complete all as specified and as directed. |
| 12 | S&F 5mm thick sheet glass, ordinary quality and glazing with oil putty in each panes complete all as specified and as directed. |
| 13 | S&F 3 mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter/partition complete all as specified and as directed. |
| 14 | S&F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work 25mm wide, 6mm thick 2nd class HW lipping on edges including dismantling complete all as specified and as directed. |
| 15 | S&F steel window/ventilator 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed and gauzed skelton shutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWRR box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to failed shutters (Hold fasts 150 mm long of 12 mm x 3 mm made to shape-04 nos per window. (b) Handle of Z sec 20 mm x 25 mm, 100 mm long-1 Nos of leaf (c) MS tower bolt 150 mm long 02 Nos per leaf. (d) Z sec 20 mm x 25 mm , 100 long of hollow square 15 mm x 20 mm x 63 mm welded to hinges – 01 Nos per leaf (f) MS pintal hinges of size 75mm x 12 mm -02 Nos per lear (g Fabrication and fixing arrangement as per drawing No CEJZ/TD -06/07 including taking down old wndow .Note Glass and painting shall be measured and paid separately under appropriate items. |
| 16 | Ditto as per description of item No 15 above but in gauzed shutters without sash bars all as directed by Engr-in-charge |
| 17 | S&F mild steel framed work such as guard bars/grills, grating etc with end of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, railings etc and similar works including one shop coat of zinc chromate primer complete all as specified. |
| 18 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks, complete all as specified and as directed. |
| 19 | Ditto all as per description of item No 18 above but fixed in repair, complete all as specified and as directed. |
| 20 | S&F 250mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 21 | S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and as directed. |
| 22 | S&F 100mm size stainless steel butt hinges for fixing to PVC doors complete all as specified and as directed. |
| 23 | S&F 200mm long mild steel tower bolt stove enamelled black with bright bolt complete all as specified and as directed. |
| 24 | S&F 150 mm mild steel pressed handles oval type, stove enamelled black complete all as specified and as directed. |
| 25 | M&L for preparation of new wood and wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 26 | M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 27 | S&F aluminium anodised barrel tower bolt of extruded section 200 mm long fixed with machine screws. |
| 28 | S&F aluminium anodised barrel tower bolt of extruded section 150 mm long fixed with machine screws. |
| 29 | S&F aluminium anodised bow handle 150 mm long fixed with machine screws. |
| 30 | S&F in repair mild steel 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete. |
| 31 | S&F in repairs Door closer hydraulically of aluminium extruded section body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 32 | S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, Complete all as specifed and as directed. |
| 33 | S& F Toughned glass 12.0 mm thickness as in hinged doors,partitions automic doors and similar work including fittings, cutting to shape ,drilling holes required, complete all as specified and as directed. |
| 34 | M&L for pressed steel frame of size 125x60mm as per IS specificaton for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate etc complete all as specified and as directed. |
| 35 | M&L for pressed steel frame of size 105x60mm as per IS specificaton for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate etc complete all as specified and as directed. |
| 36 | S & F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets. |
| 37 | S & F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors and Cabinets. |
| 38 | S&F auto hinges for cabinet case (Make ; KARF/HETICH) |
| 39 | S&F stainless steel self closing hinge of 75 mm size for PVC door shutter / kitchen cabinet complete as specified and as directed. |
| 40 | S& F 30mm width contnuous ( piano) hinges, mild steel brght finish or elecrogalvansed complete all as specified and directed |
| 41 | S&F 50 X 15 mm size magnet door catcher for closing for PVC shutter complete as specified and as directed. |
| 42 | S&F 100 mm size MS mat / glossy finish handle complete all as specified and as directed. |
| 43 | S&F magic eye brass best quality fixed in main door shutter approved by Engineer in charge complete all as specified and as directed. |
| 44 | S & F Hasp & Staple aluminium 100 mm , including bolt to hinge plate and fixed with screws with Cup Board shutter, complete all as specified and as directed. |
| 45 | Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads. |
| 46 | M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane,in fixed in repair complete all as specified and as directed. |
| 47 | M&L for 3.00 mm thick plain figured glass, pin headed type and glazing with in oil putty in sqaure n exc .5 sqm in each pane,in fixed in repair complete all as specified and as directed. |
| 48 | S&F aluminium floor door stopper 63 mm with two rubber legged complete all as specified and as directed. |
| 49 | S&F stainless steel plain basket of size 15”x18”x4” (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified and as directed. |
| 50 | S&F stainless steel plain basket of size 15”x18”x6” (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed. |
| 51 | S&F stainless steel plain basket of size 15”x18”x8” (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed. |
| 52 | S&F stainless steel partition of size 17”x20”x6” (Make: Everlite/ Slim line Peacock/Fabshine complete) all as specified & directed. |
| 53 | S&F stainless steel cutlery of size 17”x20”x6” (Make: Everlite/ Slim line Peacock/Fabshine) complete all as specified and as directed. |
| 54 | S&F stainless steel grain trolly with stand of size 21”x17”x10” (Make: Everlite/ Slimline Peacock/Fabshine) complete all as specified and as directed. |
| 55 | S&F stainless steel cup & soucer, trolly of size 15”x18”x4” (Make: Everlite/ Slim line Peacock/Fabshine) complete all as specified and as directed. |
| 56 | S&F stainless steel Plate basket of size 24\\"x30\\" (Make: Everlite/ Slim line Peacock/Fabshine) complete all as specified and as directed. |
| 57 | S&F 20” long telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed (Make: Nixon/Radol/Ozone Ultima or Equivalent) complete all as specified and as directed. |
| 58 | S&F in repair for stainless steel pipe 25 mm dia fancy typ curtain road fixed in the bracket and fancy type finials/side brackets (both side), shade as approved by GE complete all as specified and as directed. |
| 59 | S & F in repair 20mm dia curtain rails , stainless steel , chromium plated fixing in cup board with brackets, stops, rollers etc, complete all as specified and as directed. |
| 60 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and as directed. |
| 61 | Supply & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS: 14862) of size 595x595 mm and any one of the desin (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross \\"T\\" of size 15x32mm made of 0.30 mm sheet, spaced between main \\"T\\" at 600mm c/c to form a grid of 600X600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixures,smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin,etc with dash fasteners,GI adjustable rods of 3mm dia with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-Charge. |
| 62 | S & F PVC Wall lining 5mm thick consisting Hollow section plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications. |
| 63 | Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets as in roof coverings all as directed. |
| 64 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and as directed. |
| 65 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 66 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as spcifed and as directed. |
| 67 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails, post etc and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250 Quaity 'A' , complete all as specified and as directed. |
| 68 | Demolition of brick work built in cement mortar complete all as specified. |
| 69 | Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radious built in cement mortar 1:6 complete all as specified. |
| 70 | Ditto all as per description of serial item No 69 above, but except bricks complete all as specified and as directed. |
| 71 | Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls in CM 1:4 complete all as specified and as directed. |
| 72 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified and as directed. |
| 73 | M&L for non skid ceramic tiles/ non skid tiles (premium quality) coloured 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile,including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and as directed. |
| 74 | M&L for Non skid ceramic coloured tiles (premium quality) 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.. |
| 75 | M&L for Non skid ceramic coloured (premium quality) 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 Sqm on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and as directed. |
| 76 | M&L for glazed ceramic coloured tiles (premium quality) of size 450x300x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed. |
| 77 | M&L for 20 mm thick Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 78 | S&F in repairs bevelled edge looking mirror of selected quality glass, 5.5 mm thick of size 450 x 600 mm, PVC moulded case mounting on 6 mm thick AC building board or commercial ply wood on back and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs, complete all as specified and directed |
| 79 | S&F in repair, stainless steel kitchen rack of size 31”x36”x10” and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 80 | S&F in repair, Stainless Steel Sink with Drainage Board 1.0mm thick Overall size 915x460mm and Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 81 | S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender