Tender For Surfacing Work With Providing Laying Spreading And Compaction Of Gsb 15 Cm Thick, Wbm 100 Mm Thick, Wbm 75 Mm Thick, Dbm 50 Mm Thick, Bc 30 Mm Thick, Prime Coat, Tack Coat And Road Marking With Thermoplastic Paint 2.5 Mm Thick Between Km 0
Tender Value
12.96 Crore
Estimated cost
Bid Submission
19 Sep 2026
5 days left
EMD
9.73 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuensang → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Surfacing Work With Providing Laying Spreading And Compaction Of Gsb 15 Cm Thick, Wbm 100 Mm Thick, Wbm 75 Mm Thick, Dbm 50 Mm Thick, Bc 30 Mm Thick, Prime Coat, Tack Coat And Road Marking With Thermoplastic Paint 2.5 Mm Thick Between Km 0.00 To Km 11.00 On Road Tuensang-Mon Under 100 Rcc/15 Brtf Under Project Sewak In Nagaland State
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying & compaction of 150 mm thick (compacted) GSB (Granular Sub Base) conforming to Clause 401 of MORT&H Specifications for Road and Bridge Works (Fifth Revision) as specified in particular Specifications and notes of Sch ‘A’ and as directed and approved by Engr-In-Charge. |
| 2 | Scarifying Existing Bt surface in the manner to avoid any horizontal shear failure with over laid WBM work. |
| 3 | Providing, laying & compaction of WBM 100 mm (compacted) conforming to Clause 404 of MORT&H Specifications for Road and Bridge Works(Fifth Revision) as specified in particular Specifications and notes of Sch ‘A’ and as directed and approved by Engr-In-Charge. |
| 4 | Providing, laying & compaction of WBM 75 mm (compacted) conforming to Clause 404 of MORT&H Specifications for Road and Bridge Works(Fifth Revision) as specified in particular Specifications and notes of Sch ‘A’ and as directed and approved by Engr-In-Charge. |
| 5 | Application of Prime Coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer @7.5 Kg per 10 sqm by mechanical means conforming to clause 502 & table 500-03 of MORT&H specifications for Road and Bridge Works (Fifth Revision) as specified in Particular Specifications and notes of Sch ‘A’ and as directed and approved by Engr-In-Charge |
| 6 | Providing and applying of Tack Coat by using suitable low viscosity paving bitumen of bitumen of appropriate grade @ 2.5 Kg/10 Sqm conforming to table 500-5 of MORT&H specifications for Road and Bridge Works (Fifth Revision). on existing bituminous surface after cleaning all complete as per Clause 503 of MoRT&H Specifications for Road and Bridge Works (5th Revision) |
| 7 | Providing, laying and compaction of 50 mm thick (Compacted) DBM (Dense Bituminous Macadam) layer over WMM Surface with pre-coated stone chips grading confirming to Table: 500-10 and aggregates satisfying the physical requirement of table 500-08 of MORT&H specifications of Road and Bridge Works (Fifth Revision) mixed with minimum 4.5% bitumen (bitumen of appropriate grade as per particular specifications Para 8.2.1) by weight of total mix and 2% filler by weight of total mix grading requirement conforming to clause 500-09 of MORT&H specifications of Road and Bridge Works (Fifth Revision) complete in all respect and all as specified and directed by Engineer-in-Charge. |
| 8 | Providing and Mixing of stone aggregate in Hot Mix Plant, laying mix BC by paver and 30 mm thick (Compacted) BC (Bituminous Concrete) layer Pre-coated aggregate physical requirement/grading/mix composition confirming to Table: 500-16 and aggregates satisfying the physical requirement of table 500-17 of MORT&H specifications of Road and Bridge Works (Fifth Revision) mixed with minimum 5.4% bitumen (bitumen of appropriate grade as per particular specifications Para 8.2.1) requirement as per Clause 507 of MoRT&H Specifications for Road and Bridge Works (5th Revision) |
| 9 | Road Marking with Thermoplastic Paint (2.50 mm thick) conforming to Section 803 of MoRT&H Specifications for Road and Bridge Works (5th Revision) and IRC:35-2015 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender