Tender For Beautification Of Park At Shibpur Public Liabrary Under Hmc.
Tender Value
38.49 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
11 days left
EMD
76998
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification Of Park At Shibpur Public Liabrary Under Hmc.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mCPWD Vol-I P-92 It-2.8.1 |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.CPWD Vol-I P-95 It-2.27 |
| 3 | Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete :With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5CPWD Vol-II P-301 It-16.12.1 |
| 4 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.16.91.2 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.CPWD Vol-II P-317 It-16.91.2 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)CPWD Vol-I P-158 It-4.1.3 |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources).CPWD Vol-I P-108 It-4.2.2 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns CPWD Vol-I P-109 It-4.3.1CPWD Vol-I P-109 It-4.3.1 |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.CPWD Vol-I P-127 It-5.22A.6 |
| 9 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksCPWD Vol-II P-769 It-1.25.2 |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new workCPWD Vol-II P-264 It-13.61.1 |
| 11 | Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge.CPWD Vol-I P-160 It-8.17 |
| 12 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubesCPWD Vol-I P-226 It-10.16.1 |
| 13 | Providing and fixing bolts including nuts and washers complete.CPWD Vol-I P-227 It-10.20 |
| 14 | Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old workCPWD VOL-II P-268 It-13.101.1 |
| 15 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) CPWD VOL-II P-262 It-13.47.1 |
| 16 | HORTILCULTURESpreading of Sludge Farm Yard Manure or/and good Earth cum 23.60 Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm yard manure or/and good earth to be paid for separately) (Reference to MORT&H's specification 308.3.2).PWD NH Wing P-227 It-8 |
| 17 | Planting and Maintaining of Flowering Plants and Shrubs (Reference to MORT&H's specification 307).Planting flowering plants and shrubs incentral verge.PWD NH Wing P-227 It-8 |
| 18 | Turfing lawns with fine grassing including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying doobs grass roots at 10 cm apart, including supplying and spreading of farm yard manure at rate of0.6 cum per 100 sqm (Reference to MORT&H's specification 307).PWD NH Wing P-174 It-5 |
| 19 | Maintenance Work (5 years)Cleaning works of Park premises with maintenance of Grass and Trees. Unskilled Worker (Mali, Grass Cutter, Jamadars) Rs. 399/day/each worker. 3 Nos woker X 4 weeks X 12 months X 5 years = Govt. Of W.B, No : 04/Stat/14/RW/24/2023/LCS/JLC, Dated : 09/12/2025 |
| 20 | Maintenance of flowering plants and shrubs in central verge for one year. |
| 21 | PART B (Electrical Work)Supplying & Erection of big size feeder pillar box of Size (1372 x 914 x 607 mm) made up of 3.15 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box willbe painted by 2 coats of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35x35x3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5\\" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C.Ref: UDMA/Elec.-Mech.works/2018/P-7/I-40 |
| 22 | Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor (Make: L&T/ABB/ Schneider/Simence/GE) having contact block of the following range. 32-55 AmpRef: UDMA/Elec.-Mech.works/2018/P-16/I-18(f) |
| 23 | Supply and delivery of Electronic Timer suitable for 240/ 360/415V, 50 Hz(Make: L&T/ABB/Schneider/Simence/GE/Minilic) of the following time (Second) range:12.0 to 120.0Ref: UDMA/Elec.-Mech.works/2018/P-19/I-31(b) |
| 24 | Supplying and fixing Sheet steel Main Switches on angle iron frame on wall 32A, Havells Make. 240V DP with fuse on L&Npwd(elec.)Vol-I nov-17 D-1/1-a |
| 25 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required( As per Drawing no. 470 of PWD Specification Book - May 1991)2 bar, 240 V, 63 Apwd(elec.)Vol-I nov-17 D-12/19-a |
| 26 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.2+4 way, Enclosure (DHDPSNODRW04), Havells Make.pwd(elec.)Vol-I nov-17 D-9/13 |
| 27 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and nécessary connection.32A, DP, Havels Makepwd(elec.)Vol-I nov-17 D-5/6 |
| 28 | supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection .6-32A, SP, Havells Makepwd(elec.)Vol-I nov-17 D-6/7 |
| 29 | Supply and fixing of Town Glow Post Top IP66/IK10 Post Top lantern with symmetric Light distribution complete with all accessories to be fixed on suitable pole incl. bolts and nuts incl making drilled holes etc to fixing up the landscape lighting pole complete.Make: Havells, 50W LEDRef: Unified Schedule Of Rates (M&E), Irrigation & Waterways Department/P-112/I-5.3-F-13.0.2 |
| 30 | Supplying & fixing of LED Bollard Light complete with all accessories.Make- Crompton 10 WattRef: Unified Schedule Of Rates (M&E), Irrigation & Waterways Department/P-112/I-5.3-F-14.0.4 |
| 31 | Distribution wiring in 1.1 KV single core stranded FR: PVC insulated & unsheathed copper wire. (Brand approved by EIC) in 20mm size PVC ngid conduit 'FR (Precision make) incl.necy. fittings as required 2 x 36/0.3(2.5 x sqmm) + 1 x 22 / 0.3 (1.5 sqmm) ECCpwd(elec.)Vol-I nov-17 E-14-1-a-2 |
| 32 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid Gl fish wire and making necy, connection as required 2 X 22/0 .3 (1.5 sqmm)pwd(elec.)Vol-I nov-17 E-9-a-2 |
| 33 | Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precon make) inct recy PVC clips, fittings etc 2 * 3603 2.5 sqmm)1 22/03 (1.5 sqmm)pwd(elec.)Vol-I nov-17 E-11-1-c |
| 34 | S/F M.S. loop box (14 SWG) of size 10 cm x 10 cm x 7.5 cm Each suitable for housing the water-tight switch and providing the wirelead in lead out arrangement for switch and lamp holder connection. One side of the cover lid of the box is to be hinged type and the other side with proper clamping and locking arrangement the box. The set is to be fixed in suitable ositionon iron leg on wall as per direction of Engineer-In-Charge.Ref: UD&MA/Electrical-Mechanical works/2018/P-6/I-32 |
| 35 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre. including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammedpwd(elec.)Vol-I nov-17 F-2/1-a |
| 36 | Supplying & wiring in 6.0 sqmm 'FR' stranded Copper wire single core inside feeder piller box as per direction of E.I.C.Ref: PWD/Elec.works/2017/P-K-2/Sl No.-73 |
| 37 | (i) Supplying & Delivery of LED Flood Light with pressure die cast aluminium housing,IP66 Protection,road way luminarie with high power LED. Type: 200 Watt LED Flood LightRef: KMDA/MED approved rate |
| 38 | (ii) Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structureRef: PWD/Elec.works/2017/P-C-3/I-20(a) |
| 39 | Supply and delivery of LT power cable Aluminium conductor, 2 core, 6 sqmm armouredRef: UD&MA/Electrical-Mechanical works/2018/P-11/I-1 |
| 40 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc as necy. mending good damages and paintingpwd(elec.)Vol-I nov-17 F-1/2-a |
| 41 | Supply and Fixing of 2 mm Polyvinyl glow sign board made of 22 SWG GI sheet box with 1”X1” aluminum channel for fixing the vinyl board after necessary cutting the letter as required & s\f LED tube light fittings along with all accessories.Ref: UD&MA/ Elec.-Mech works/ 2018/P-14/I-B4 |
| 42 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (hot Dip) wire (4 Mts.long), 13 mm dia x 80 mm long GI bolts, double nuts,double washers incl. S&F 15 mm dia GI pipe protection (1 Mt.long)to be filled with bitumen partly under the ground level and partly above groung level driven to an average depth of 3.65 Mts.below the ground level. By ISI-Medium G.I Pipe. Ref: PWD/Elec.works/2017/P-G-1/I-2(a) |
| 43 | Supply and fixing of SkyCove LED Strip Light (5M length) with driver and necessary connection.Make : Havells, LED Strip SKYCove 5M WW with driverRef: UDMA/Elec.-Mech.works/2018/P-112/I-5.3 F.12.01 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender