Tender For Mtps-I - Tm - Unit -Iii- Removal Of Insulation And Providing Re - Insulation To Pipe Lines, Valves, Deaerator Main Flange, Gland Steam Cooler, Low-Pressure Heater, Flash Tanks And Its Accessories And Disposal Of Waste Insulation Materials
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Sep 2026
4 days left
EMD
4200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mtps-I - Tm - Unit -Iii- Removal Of Insulation And Providing Re - Insulation To Pipe Lines, Valves, Deaerator Main Flange, Gland Steam Cooler, Low-Pressure Heater, Flash Tanks And Its Accessories And Disposal Of Waste Insulation Materials For Unit-Iii Annual Overhaul During 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Charges for removal of insulation and providing reinsulation to Flash Tank and its accessories. This work involves removing insulation around the flash tank and connected drain Water lines and flanges and providing reinsulation to the required area and also Providing plastering work over the insulation. |
| 2 | Charges for removal of insulation and providing re-insulation to Gland Steam Cooler-I . This work involves removing insulation around the water box side, inlet and Outlet flanges and providing reinsulation to the removed portion and fitting Aluminum sheet over it. |
| 3 | Charges for removal of insulation and providing reinsulation to Low Pressure Heaters. This work involves removing the insulation on the flange side, inlet and outlet of the LPH and side and finally providing re-insulation to the removed portion. |
| 4 | Charges for removal of insulation and providing re-insulation to Vent Condenser. This work involves removing insulation around the water box side, inlet and outlet flanges and providing re-insulation to the removed portion and fitting Aluminum sheet over it. |
| 5 | Charges for fabrication and fixing of new insulation boxes for valve Size 300 / 250 mm including charges for cutting the Aluminium sheet, Bending to required shape. |
| 6 | Charges for fabrication and fixing of new insulation boxes for valve size 65, 100, 150, 200, 250 mm etc including charges for cutting the Aluminium sheet, bending to required shape & all consumables, T&P etc., |
| 7 | Charges for removal and renewal of insulation and repairing the insulation boxes to 300, 400, 500 mm valves. |
| 8 | Charges for removal and renewal of insulation and repairing the insulation boxes to 200, 250 mm valves |
| 9 | Charges for removal and renewal of insulation and repairing the insulation boxes to 65, 100, 150 mm valves. |
| 10 | Removal and Re Insulation in damaged portion of Pipe Lines.a) Charges for removal of insulation and Aluminium sheet and providing Scaffolding arrangement wherever necessary for pipe lines.This work involve removing exiting damaged insulation in HD Drip Lines, DW, ES, MC, AS Lines. |
| 11 | b) Charges for providing re-insulation with Ceramic blankets /wool mattress and Aluminium sheet wherever necessary for pipe lines. This work involve removing exiting damaged insulation in HD Drip Lines , ES,MC,AS Lines and Deaerator damaged pipe lines, cutting of mattress for required size and putting back after removing the existing wool blankets. |
| 12 | Replacement of damaged Aluminium sheet over pipe line insulation.Charges for cutting new Aluminium sheet at required size, bending the sheet at required shape, providing locking grooves fitting Aluminium sheet on the insulation and positioning The sheets intact with suitable fasteners. (Where the Aluminum is not available location for HD/AS/ES Lines). |
| 13 | Providing CAT 9 Cement plastering for damaged pipe line insulation.Transporting the cement from pocket store to work spot, Mixing the cement with water, Plastering the cement on the insulation and finishing the cement and cleaning the waste Cement on the floor. Providing suitable thermal safety appliances for handling hot spots. |
| 14 | Disposal of waste insulation materials.Charges for transportation of waste insulation material from work spot to ear marked area to dump. |
| 15 | Consumables and T& P Charges For Item Sl.No: 1 to 14 Drive End/Heater Drip Pump/ Model: NU 411 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender