Tender For Construction Of Co- Location Of Common Service Centre With Panchayat Bhawan For Sivanthipantti Village Panchayat.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
3 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Co- Location Of Common Service Centre With Panchayat Bhawan For Sivanthipantti Village Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Co- location of Common service centre with Panchayat Bhawan for Sivanthipantti Village Panchayat. |
| 2 | Earth work excavation for foundation in all soils and subsoils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layersw of not more than 15cm thick well rammed and consolidated and depositing the surplus earth in all places shown by departmental officers with initial leae and lift etc, complete complying with standard specifiacfion and as directed. |
| 3 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 4 | Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete. |
| 5 | Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 6 | Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement and in all floors for R.C.C Column,footing column pedestals plinth beam, grade beam raft slabs, stair case steps bed blocks, critical pier etc, using mild steel sheets of size 90x60x10cm gauge stiffened welded with mild steel angles of size 25x25x3 mm for boarding laid over silver oak joists of size 10cmx6.50cm spaced at about 90 cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete cimplying with standard specification and as directed. |
| 7 | Suplying fabricating and placing in position mild steel or ribbed for steel for all reinforced centre concrete works as per the design given including cost of steel and binding wire in all floors etc, complete complying with standard specification. TThe binding wire shall be supplyed by the contractor. |
| 8 | Cement concrete 1 : 1.5 : 3 using 20 mm gauge machine crushed HGBS Jelly for all RCC itmes of wodrks excluding cost of reinforcement and fabricating charges centring and like for lambs in the R.C.C Floor or roof slabs, wherever necessary and bearing of walls sides and bottoms of the slabs, beams etc, complete complying with standard specification. The rate including vibration charges. |
| 9 | Brick work in cm 1:5 using country bricks ground moulded of size 23x11x7cm for the following including curing etc. complete complying with standard specification. |
| 10 | Supplying and erecting for sides and soffits including supports and strutting up to 3.29m height for plane surfaces in all cross bracing using mild steel sheets of size 90x60cm and 10 gauge stiffered welded with mild angles of size 25x25x3mm for boarding laid over silver oak joists of size 10cmx65cm dia spaced at 75cm centre to centre etc, complete complying with standard specification and as directed for the following items, R.C.C. floor slab, rectangular, square beams, lintel stair case like all RCC works. |
| 11 | Supplying and fixing of steel door of size 1.20x2.10m including all labour charges for fixing etc, complete complying with standard specification. |
| 12 | Supplying and fixing of steel window of size 1.20x1.30m including all labour charges for fixing etc, complete complying with standard specification. |
| 13 | Labour charges for fixing steel door |
| 14 | labour charges for window fixing |
| 15 | Supply and fixing of cuddapah slab 25mm thick including all labour charges etc. |
| 16 | Weathering course concrete using best quality of broken jelly of size 20 mm uniform gauge in pure slaked lime (No sand to be used) over in a single layer and consolidated to the required sesign and finished thick ness, breating the concrete with wooden beaters of approved pattern, keeping the surface constantly wested by sprinking lime jaggerey directed by the departmental officers. |
| 17 | Finishing the top of roof with one course of pressed tiles of size 20x20x2cm size of approved quality, It laid with cm 1:3 , 10mm thick and pointing with same mortar the mixed with water proof compound 1kg mixed with one cement kg etc. complete complying with standard specification and as directed. |
| 18 | Plastering with cement mortar 1;5, 12mm thick in all floors including curing etc. complete complying with standard specification and as directed. |
| 19 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 20 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 21 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). |
| 22 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 23 | Painting two coats of new iron works such as steel doors, windows ventilators, window bars balustrads etc, with best approved first quality of synthetic enamal paint of approved colour over the existing priming coat etc, complete complying with standard s |
| 24 | Supply and fixing of 110mm PVC 4ksc rain waterpipe |
| 25 | Filling the 40mm metal for rain water harvesting pit |
| 26 | Wring with 2x1.5 sqmm (22/0.3) Pvcinsulated sc cu Conductor of 1100V grade in surtable PVC rigid pipe on wall and celling with PVCaccessorles with TW switch box with 5A ft switch with painting of suitable colour for open PVC light point / fan point SD 25 |
| 27 | Supply and run of 2 of 1.5sqmm (22/0.32)PVC insulated SC unsheathed CU. Conductor of 1100V grade on 7/20 Gi bearer wire for service connection mains.SD NO:64 |
| 28 | Supply and fixing of fsingle box type 4'40 W flu fitting complet with copper chock and condensor with TW round blocks on wallcelling with flu tube with PVC unsheathed copper leads from terminals to the fitting. SD NO:88 |
| 29 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender