Tender For Replacement Of The One (01) No. Old Lift Including Allied Electrical Works At S.N. Das Building Of Howrah District Hospital
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2026
13 days left
EMD
36000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of The One (01) No. Old Lift Including Allied Electrical Works At S.N. Das Building Of Howrah District Hospital
BOQ
| Sl. No. | Item Description |
| 1 | SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to relevant IS) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall/floor if any etc. to complete as required. |
| 2 | Make-OTIS/KONE/SCHINDLER Type: Passenger Lift. Load: 8 passenger /544 Kg. Control: Microprocessor based with serial communication controller in shaft & user interface in landing (VVVF) (Closed loop) Machine Room : Energy efficient machine, Gearless, with Machine Room Speed: 1.0 Mtrs./Sec Floor served: G+5 Landing: 6, all on same side Total rise: 21 mtr.(approx) Operation: Microprocessor based simplex full collective with or without attendant. Signals: Digital car position indicator, car travels direction indicator in car & at all landing withh call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button. Button: All buttons on car & landing shall be luminous, on /off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type: Colour LCD / Segmented LCD/LED Operation Push Button for lift maintenance & service should be on top of the car. Leveling accuracy: ± 5 mm (micro levelling arrangement) |
| 3 | CAR Car inside: 1300mm(W) X 1100mm(D) X 2100 mm (H) or as per OEM standard. Car Entrance: Clean Opening- 800mm (W) X 2000mm (H) protected with car door or as per OEM standard. |
| 4 | Car Finish & Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail. (a) Rear Mid Panel- stainless steel sheet (20 SWG) with hairline finish (b) Reae corner Panel- stainless steel sheet (20 SWG) with hairline finish (c) Side Mid Panel- stainless steel sheet (20 SWG) with hairline finish (d) Side Corner Panel- stainless steel sheet (20 SWG) with hairline finish (e) Front Panel- stainless steel sheet (20 SWG) with hairline finish. |
| 5 | Car Ceiling & Lighting:stainless steel sheet with hairline finish with LED lighting and Fan. |
| 6 | Car Ventilation: Cross flow pressure fan with anodised aluminium grill. |
| 7 | Car Flooring : Decorative granite flooring( as per direction of EIC and according to this Department's order). |
| 8 | Car Door: stainless steel centre opening( COPD) automatic door provided with AC V3F controlled door drive system with full height infrared curtain of light and mechanical force limiting device, with fire rating of minimum 120 minutes. Landing Door:stainless steel centre opening( COPD) automatic door provided with AC V3F controlled door drive system,with fire rating of minimum 120 minutes. Door Opening: Automatic power operated door with full length photocell assembly light curtain sensor/ infrared detector. |
| 9 | PROTECTIVE DEVICES & OTHER ACCESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of power failure/ single phasing/ others. Overload Protection: Fully loaded with overload protection on overloading the lift car will not start with door remaining open and give audio display indication Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom System: Battery operated intercom system in the Lift Car, Machine Room and Controll Room. Emergency Alarm: Battery operated alarm bell system in the lift car and controll room. Fireman Switch: Fireman switch at main landing terminal. Voice Synthesizer: Voice announcement system ( Voice synthesizer) in the car to announce the position of the elevator in the hoist way as the passes or stops at a floor served by the elevator. Car parking at top floor at idle condition. Main wire rope/Belt: As per manufacturer's standard conforming to respective applicable IS Hand Rail: stainless steel mirror finish hand rails on rear car panels Auto Fan cut off. |
| 10 | DIMENSION OF SHAFT & POWER SUPPLY Proposed shaft dimension- 1970mm (W) X1870mm (D) Proposed Pit depth: 1720 mm or as per actual site condition . Proposed Overhaed: 4648mm or as per actual site condition . Electric power supply: AC 415 Volt 3 phase, 50 Hz , terminated in machine room as per IS. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender