Tender For Emergent Work Of Aluminium, Flooring Etc At Different Floors Of Nabanna Building In The District Of Howrah During The Year 2026-27.
Tender Value
24.33 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
13 days left
EMD
48665
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emergent Work Of Aluminium, Flooring Etc At Different Floors Of Nabanna Building In The District Of Howrah During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | 21.1Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sideswith required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : 21.1.1For fixed portion 21.1.1.1Anodised aluminium (anodised transparent ordyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) |
| 2 | 21.1.1.3Polyester powder coated aluminium (minimumthickness of polyester powder coating 50micron) |
| 3 | Float glass 6mm thick substrate with reflective costing on face # 2 (outer side), + 12mm Airgap + 6mm Clear Glass (inner side) both glass fully toughened of approved make having properties as visible light transmittance (VLT) of 35- 55 %, Solar Heat Gain Coefficient of not more than 0.50 and U value of not more than 3 W/m2 degree K etc. for north having latitude more than or equal 15 degree. |
| 4 | 21.3Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): 21.3.2With float glass panes of 5 mm thickness (weight not lessthan 12.50 kg/sqm) |
| 5 | 26.45Supplying and installation of moisture resistant/fire resistant cement boardas per standard sizes fixed with self-drilling / taping screws. Screws shallbe of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge oflength varying from 25 to 45 mm. 26.45.1Cement Fiber Board 6 mm thick as per IS 14862:2000 oftype B (High pressure Steam Cured) |
| 6 | 9.21Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board constructionwith frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on bothfaces of shutters:9.21.230 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws |
| 7 | 9.40Providing and fixing wooden moulded beading to door and windowframes with iron screws, plugs and priming coat on unexposed surfaceetc. complete : 9.40.1.250 x 20 mm |
| 8 | 9.127Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protectivesurface layer and reverse side of adhesive bonding quality conforming toIS : 2046 Type S, including cost of adhesive of approved quality. 9.127.21.0 mm thick |
| 9 | 9.1Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fast lugsor with dash fasteners of required dia & length (hold fast lugs or dashfastener shall be paid for separately). 9.1.2Sal wood |
| 10 | 9.53Providing 40x5 mm flat iron hold fast 400 mm long including fixing to framewith 10 mm diameter bolts, nuts and wooden plugs and embedding incement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size). |
| 11 | 9.74Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete : 9.74.3150x10 mm |
| 12 | 9.81Providing and fixing bright finished brass handles with screws etc.complete: 9.81.1125 mm |
| 13 | 9.83Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossedon the body, door weight upto 35 kg and door width upto 700 mm), withnecessary accessories and screws etc. complete. |
| 14 | 9.76Providing and fixing bright finished brass 100 mm mortice latch andlock with 6 levers and a pair of lever handles of approved quality withnecessary screws etc. complete. |
| 15 | 9.95Providing and fixing ISI marked aluminium butt hinges anodised (anodiccoating not less than grade AC 10 as per IS: 1868) transparent or dyed torequired colour or shade with necessary screws etc. complete:9.95.4100x63x4 mm |
| 16 | 9.96Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868), transparentor dyed to required colour or shade, with nuts and screws etc. complete : |
| 17 | 14.1Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5sq.meters and under, including cutting the patch in proper shape, rakingout joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground, all complete as perdirection of Engineer-in-Charge. 14.1.1With cement mortar 1:4 (1 cement : 4 fine san |
| 18 | 13.80Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 19 | 13.85Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content.13.85.3With water thinnable cement primer on wall surface havingVOC content less than 50 grams/litre |
| 20 | 11.41AProviding and laying Vitrified tiles in floor in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS:15622, of approved brand & manufacturer, in all coloursand shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarsesand) jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cutwith the zero chipping diamond cutter only . Laying of tiles will be donewith the notch trowel, plier, wedge, clips of required thickness, levelingsystem and rubber mallet for placing the tiles gently and easily.11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size11.41A.3.2 Size of Tile 600 x 1200 mm |
| 21 | 8.31Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge, in skirting, risers of steps anddados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm, includingpointing in white cement mixed with pigment of matching shade complete. |
| 22 | 13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required, toachieve even shade and colour.13.82.2 Two coats |
| 23 | 12.52Providing and fixing tiled false ceiling of specified materials of size595x595 mm in true horizontal level, suspended on inter locking metal gridof hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm,both side inclusive) consisting of main “T” runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mmthick (minimum) sheet, spaced at 1200 mm center to center and cross“T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600 mm center to center to forma grid of 1200x600 mm and secondary cross “T” of length 600 mm andsize 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlockedat middle of the 1200x600 mm panel to form grids of 600x600 mm andwall angle of size 24x24x0.3 mm and laying false ceiling tiles of approvedtexture in the grid including, required cutting/making, opening for serviceslike diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T”runners to be suspended from ceiling using GI slotted cleats of size 27 x37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dashfasteners, 4 mm GI adjustable rods with galvanised butterfly level clips ofsize 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T,bottom exposed width of 24 mm of all T-sections shall be pre-painted withpolyester paint, all complete for all heights as per specifications, drawingsand as directed by Engineer-in-charge.12.52.3 12.5 mm thick square edge PVC Laminated GypsumTile of size 595x595 mm, made of Gypsum plasterboard,manufactured from natural gypsum as per IS 2095 part I andlaminated with white 0.16 mm thick fire retardant PVC filmon the face side and 12 micron metalized polyester on theback side with all edges sealed with the face side PVC filmwhich goes around and wraps the edges and is bonded tothe edges and the back side metalized polyester film so as tomake the tile a completely sealed unit. |
| 24 | fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointingcompound in 3 layers covering upto 150 mm on both sides of joint and twocoats of primer suitable for board, all as per manufacturer’s specificationand also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed,all complete as per drawings, specification and direction of the Engineerin Charge but excluding the cost of painting with : 12.45.112.5 mm thick tapered edge gypsum plain board conformingto IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 25 | Using correction factor on DSR-2023 on account of GST @ 0.973 |
| 26 | Cost Index @ 22.00% on DPAR'2023 items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender