Tender For Repairs To Certain B/R And E/M Works At No 5 Bn, Att, Hor, Swimming Pool, Jtt And Rakesh Sharma Block And Certain Bldgs At Nda Khadakwasla
Tender Value
35 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Certain B/R And E/M Works At No 5 Bn, Att, Hor, Swimming Pool, Jtt And Rakesh Sharma Block And Certain Bldgs At Nda Khadakwasla
BOQ
| Sl. No. | Item Description |
| 1 | M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:3:6 type C1 grade design mix and setting in cement mortar (1:6) all as specified and as directed |
| 2 | Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superficial area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to disturbed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as specified and directed |
| 3 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting exc. 20 cm in girth(area of C/S in cutting not exc 8 cmx6 cm) complete all as specified and directed . |
| 4 | M& L for cutting holes in brick wall / stone wall / PCC block walls exc one brick but not exc two brick in cement mortar for inserting holdfasts and making good dismantling portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed . |
| 5 | M&L for 16 to 18 mm thick granite (of any type any colour) work (table rubbed 7 polished ) in window door cills/jambs, platform like in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as directed. |
| 6 | M&L for 16 mm thick granite both side polished for urinal partition / vertical surfaces etc. in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as directed. |
| 7 | S & F in repairs of 2nd class Hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc 3 but not exc. 6 sqcm complete all as specified and directed. |
| 8 | S & F in repairs 2nd class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 Sq. cm and not exceeding 13 Sq. Cm complete all as specified and directed. |
| 9 | S & F of 2nd class Hard wood clean sawn battens at 30 cm centre, sectional area exc 5 and n.exc 15 Sqcm complete all as specified and directed. |
| 10 | S&F in repairs 2nd class hardwood timber in clean sawn battens or fillets complete all as specified directed. |
| 11 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and directed. |
| 12 | S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-1, section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 13 | S&F 30 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed. |
| 14 | S&F 30 mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 15 | Taking down existing aluminum chowkats or frames of any description and in any position not exceeding 4 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed. |
| 16 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 17 | Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 18 | Taking down shutters of any description not exceeding 1.0 Sqm each complete all as specified and directed. |
| 19 | Resecuring or easing & adjusting and refixing in same opening including taking down shutters if necessary, necessary grinding, sanding, repair/repair of damaged rail/panel of any description n.exc 2 sqm each complete all as specified and directed. Note : (i) Rate deemed to be inclusive of 1st class hardwood plain panel, style, rail required to be replaced of size matching wih existing and making the surface good by necessary polishing/painting/oiling. (ii) The rates for necessary scaffolding required shall be deemed to be included. |
| 20 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. |
| 21 | S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.. |
| 23 | M& L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 24 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing as per specification & drawing on SI page No. 161 of SSR Part-II complete all as specified and directed. |
| 25 | S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. |
| 26 | S&F PVC door frame of size 50mm x 47mm made out of 5mm but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified & directed |
| 27 | S&F in repairs aluminium anodized barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 28 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 29 | S&F in repairs 300 mm long stainless steel sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 30 | S&F in repairs Brass, sliding door bolt 300 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 31 | Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 32 | S&F in repairs 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 33 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 34 | S & F 75 mm Stainless steel Butt hinges, heavy weight, cold rolled with screws complete all as specified and directed. |
| 35 | S & F 100 mm Stainless steel Butt hinges, heavy weight, cold rolled with screws complete all as specified and directed. |
| 36 | S & F 125 mm Stainless steel Butt hinges, heavy weight, cold rolled with screws complete all as specified and directed. |
| 37 | S & F in repairs 100 mm Stainless steel Butt hinges, heavy weight, cold rolled with screws complete all as specified and directed. |
| 38 | S & F in repairs 125 mm Stainless steel Butt hinges, heavy weight, cold rolled with screws complete all as specified and directed. |
| 39 | S&F 150 mm extruded anodised Aluminium alloy plate handles ‘D’ type, fabricated type and fixed complete all as specified and directed. |
| 40 | S&F in repairs 150 mm Aluminium handles,'D' type fabricated type, anodised and fixed complete all as specified and directed. |
| 41 | S&F in repairs stainless steel curtain rod 25mm dia including fancy type brackets and end caps-02 No for each rod complete for fixing in repair etc all as specified and as directed. |
| 42 | S&F in repair stainless steel tubular towel rail 20mm dia 600 mm long between flanges ‘D’ type of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. |
| 43 | S&F in repairs heavy duty high grade stainless steel wall mounted towel rack 600mm long with lower hanferan hooks fixed on wall complete etc all as specified and as directed. Make : Cera cat Part No F5003101 Ormond range, Parryware, Hindusthan sanitary ware industries or equivalent |
| 44 | S&F in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places screw all as specified etc all as specified and as directed. |
| 45 | S&F in repairs Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width of and of weight between 61 to 80 Kg. (extruded section) complete all as specified and directed. |
| 46 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 47 | S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 48 | Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 49 | Supply and fix in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 50 | S & F Mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tank and similar work confirming to Fe-290 Gde E-165 Complete all as specified and as directed. |
| 51 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 52 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions.(Note: Floor door spring and sheet glass shall be measured and paid separately). |
| 53 | Checking of aluminium joinery Door/window/ventilator etc area n.exc 4 Sqm removing from position and fixing in same location requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, rubber gasket, plug etc. to make it functional complete all as specified and directed. (Note: New aluminium section items required to be replaced shall be paid under respective items). |
| 54 | Material & labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 55 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions false ceiling including sunk or raised moulding pattern approved by GE fibre fixed to & including the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to Gl frame work for (605 mm x 605 mm) seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl thin layer of putty with gypsum binder, sanding the surface till smooth surface is obtained and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 56 | S&F in repairs 1mm Plain, galvanised, mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pieces can be cut) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 57 | S&F in repairs 1mm Plain, galvanised, mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pieces can be cut) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender