Short Dated Tender - Tender For The Renovation Of The Dilapidated Garbage Collection Center Located On Nana Road (Zone-01, Ward-109).
Tender Value
6.06 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
0 days left
EMD
60632
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short Dated Tender - Tender For The Renovation Of The Dilapidated Garbage Collection Center Located On Nana Road (Zone-01, Ward-109).
BOQ
| Sl. No. | Item Description |
| 1 | 694-FS17004-DIMOLITION & DISMENTLING-Dismentling reinforced cement concrete or reinforced brick work including stacking of dismantled materials Dismentling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).-Rate-1200 per 1 Cum. |
| 2 | 691-FS17001-DIMOLITION & DISMENTLING-Dismantling sundries brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). Dismantling sundries brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).-Rate-110 per 1 Cum. |
| 3 | 2.8-FS4003-Earth Work-E/W in Excavation in trenches for foundation pipe cable etc in ordinary soil (loan clay or sand ) including 1.5left and 50m and dressing Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated soil as directed, within a lead of SOm.lncluding dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the All kinds of soil.-Rate-215 per 1 Cum. |
| 4 | .1.8-FS5005-Concrete/R.C.C. Work-4.1.8 Providing and laying In position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm (nominal size)-Rate-5740 per 1 Cum. |
| 5 | 5.2.2-FS5025-Concrete/R.C.C. Work-RCC work with cement approved coarse sand and 20mm approved stone ballast in proportion for raft foundation with 1:1.5:3 (1 cemnt 1.5 C. sand 20 mm size stone ballast) RCC work with cement approved coarse sand and 20mm approved stone ballast in proportion for raft foundation with 1:1.5:3 (1 cemnt 1.5 C. sand 20 mm size stone ballast) including bending binding and fixing of reinfocement in position casting cutting of wall and satisfaction of the engineer in charge including cost of all material etc all complete (ch-5, sn-15, ref- 5.2.2)-Rate-8600.00 per 1 Cum. |
| 6 | 10024-F10024-MILD STEEL & IRON WORK-S. or iron in plain work such as reinforcement concrete or reinforced brick work (when not icluding over rate ) wrought torequired shape as necessary including bending for proper complition of the work and including suply of steel its wastage bend hooks and authorized ocerlaping shall be measured up two floor two level (over all rate S. or iron in plain work such as reinforcement concrete or reinforced brick work (when not icluding over rate ) wrought torequired shape as necessary including bending for proper complition of the work and including suply of steel its wastage bend hooks and authorized ocerlaping shall be measured up two floor two level (over all rate-Rate-7400.00 per 1 Qtl |
| 7 | 13.5.1-FS13005-PLASTER AND PAINTING-13.5.1 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand) 15 mm cement plaster on rough side of single or half brick wall of mix:-Rate-232.00 per 1 Sqm. |
| 8 | NA-F13012-PLASTER AND PAINTING-Providing and applying white cement based putty of average thickness of 1mm of approved brand and manufacture over the plaster wall surface to prepare the surface Providing and applying white cement based putty of average thickness of 1mm of approved brand and manufacture over the plaster wall surface to prepare the surface even and smooth including cost of material labour-Rate-132.00 per 1 Sqm. |
| 9 | NA-S15027-PAINTING AND DISTEMPERING-New Finishing walls with exterior emulsion paint (Apex) Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/l0sqm including one coat of primer applld @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required fororooer comoletlon of work.for two coat.-Rate-132 per 1 Sqm. |
| 10 | 4.3.1-FS5013-Concrete/R.C.C. Work-Foundations, footings, bases for columns Centering and shuttering including strutting, propping etc. and removal of form work for (Upto 5thFloor) :-Rate-212 per 1 Sqm. |
| 11 | 3.2222-F5031-Concrete/R.C.C. Work-M-150 class brick work in 1:4 cement mortar with cement & C-sand including mat., Lab., T&P etc. all complete. M-150 class brick work in 1:4 cement mortar with cement & C-sand including mat., Lab., T&P etc. all complete.-Rate-3671 per 1 Cum. |
| 12 | 5.34.1-FS5027-Concrete/R.C.C. Work-All works upto plinth level Providing and laying In position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured In fully automatic batching plant and transported to site of work In transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, Including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures In recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-In-charge. (Note :- Cement content considered In this item Is @ 330 kg/cum.Excess/less cement used as per design mix Is payable/recoverable separately).-Rate-9560.00 per 1 Cum. |
| 13 | 10.6.2-FS10006-MILD STEEL & IRON WORK-10.6.2 80xl.25 mm M.S. laths with 1.25 mm thick top cover Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and Jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to 15: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.-Rate-2250.00 per 1 Sqm. 80 |
| 14 | 18@ gst /recoverable separately)all comp. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender