Tender For Rate Contract For Supply Installation Testing and Commissioning of Monoblock Pump Set In Various Te Building/ Colonies In Ba Dehradun
Tender Value
5.82 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
6 days left
EMD
11646
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rate Contract For Supply Installation Testing and Commissioning of Monoblock Pump Set In Various Te Building/ Colonies In Ba Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | S/I/T/C of 5 HP Centrifugal Monoblock pump set with Mechanical seal & Cast Irom Impller suitable for a water discharge of Approx. 8.5-5.8 LPS against a total head of 18-34 mtr. from all cause having 2840 RPM suitable for operation on 3 Phase 415V, 50HZ , AC Supply having suction and delivery sizes of 65mm x 50mm , fixed on existing angle iron frame and necessary nuts and bolts ,washer complete i/c dismantling of existing motor pump set with all accessories etc as reqd [M/S Kirloskar KDS /KDI 538 + /Crompton or SS make ] |
| 2 | S/I/T/C of 3 HP centrifugal Monoblock pump set with mechanical seal and Cast Iron Impller suitable for a water discharge of 5.7 -2 LPS against a total head of 12-36 mtr. from all cause with mechanical seal ,having 2840 RPM suitable for operation on 3 Phase 415V, 50HZ , AC Supply having suction and delivery sizes of 65mm x 50mm,fixed on existing angle iron frame i/c necessary nuts and bolts ,washer and complete i/c dismantling of existing motor pump set with all accessories etc as reqd [M/S Kirloskar KDS 325++ /Crompton or SS make ] |
| 3 | Providing C.C. foundation for Pump Set with 1:2:4 P.C.C. ratio (One cement: 2 Coarse sand : 2 graded stone aggregate of 20mm nominal size) of reqd. size i/c suitable M.S. angle of size 25X25X3mm all around edges of foundation , plastering, centering and shuttering etc as may be reqd. |
| 4 | S/F of 65mm dia ( 2 1/2\\") U PVC Socket type Column pipe suitable for 10 kg/cm2 hydrostatic pressure for suction line i/c coupler socket , threading etc. complete as reqd. |
| 5 | S/M connection of the pump with following dia 'B' class ISI Marked GI pipe for suction/delivery line with all ISI mark accessories like tee, union, bend/ elbow ,socket, flanges ,reducer nipple i/c cutting, threading, welding & rubber gasket i/c painting complete as reqd. |
| 6 | S/F of following size ISI marks Valves I/c fitting the same in suction /discharge line etc as reqd (Make Sant /leader or SS) |
| 7 | 25 mm dia Bronze Gate valve screwed type class -1 |
| 8 | 50 mm dia Bronze Gate valve screwed type class -1 |
| 9 | 50mm dia Bronze Horizontal lift check valve screwed type class -1 |
| 10 | 63 mm dia Bronze Screwed foot valve |
| 11 | S.I.T.C of floor mounted cubical type Pump motor starter panel suitable for operation on 415V,3 phase 4 wire,50 Hz A.C. Supply with dust & vermin proof ,made out of 16SWG M.S. Sheet with powder coating paint with constitute of following accessories I/c interconnection with suitable size pvc insulated copper conductor cable as per specifications and drawing attached . |
| 12 | a)100 Amp 4 pole MCCB ,Icu=10KA at 415 V with separate terminal - 1 No |
| 13 | b) 20 Amp TP MCB \\"C\\" curve for each pump.-2 No |
| 14 | c) 4 strip 60 CM long 200 amp alu bus bar-1 Set |
| 15 | d) Digital Voltmeter size 96mmx96mm square flush LED display with inbuilt selector switch suitable for work on 415 V 3 phase AC supply class 1 accuracy etc -1 No |
| 16 | e) Digital ammeter 96mmx96mm square flush LED display with inbuilt selector switch suitable for CT operated AC supply class 1 accuracy etc -1 No |
| 17 | f) 100/5 wound CT - 3 No |
| 18 | g) 22.5 mm dia LED type Indication lamp suitable for 230V AC Supply -5 No |
| 19 | h) DOL Starter in SS enclosure suitable for 5H.P. Monoblock pump and suitable for work on 3 phase ,415 volts ,50 Hz AC supply system with SPP feature with over load relay range 6 to 10 A etc complete -2 No |
| 20 | j) One no 32A TPN MCB 'C\\" Curve ,and 6 No 6-16 A SPMCB with \\"C' Curve and Neutral link and 4 No 32A 4 pole Stud type connector i/c interconnection wiring etc |
| 21 | 1. Note -Drawing for the panel shall be got approved from Engineer-in-charge before fabrication of panel. The panel shall be fabricated as per specification attached |
| 22 | 1. Note -Drawing for the panel shall be got approved from Engineer-in-charge before fabrication of panel. The panel shall be fabricated as per specification attached |
| 23 | S/F of following MS items to be used for for frame work I/c Cutting, welding painting etc. as required. |
| 24 | 50mmx50mmx5mm Angle Iron Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender