Tender For Construction Of Vss Building At Tikilipada Of Jamankira Wl Range Under Bamra Wl Division
Tender Value
10.81 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
9 days left
EMD
10810
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Vss Building At Tikilipada Of Jamankira Wl Range Under Bamra Wl Division
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation of foundation in hard or gravelly soil within initial lead of 50m and initial lift of 1.5m including dressing the sides, leveling the bed and depositing the excavated materials away from the work site, shoring etc if required, complete the item of work in all respect as per direction of the Engineer-in-charge. |
| 2 | Filling foundation and plinth with filling sand laying in layers including ramming, watering, compacting including cost, conveyance and royalty of sand from approved quarry and other . if any with all leads, lifts, T&P etc complete the items of work in all respect as per specification and direction of Engineer in charge. |
| 3 | CC (1:4:8) using 40 mm size and down graded crusher broken HG stone metal free from weathered surface of approved quality from approved quarry in foundation and plinth including laying concrete in layers with due compaction, watering and curing including cost, conveyance, royalty and . of all materials with all lead, lifts and delifts, T&P etc required for completion of the work in all respect as per direction of the Engineer-in-charge. |
| 4 | Brick work with Fly Ash Brick in cement mortar (1:6) in foundation & plinth including cost, conveyance, royalty, . of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge. |
| 5 | RCC work of M-20 grade with 20 mm and down grade black hard granite chips including cost, conveyance, royalty and all . of all materials with all leads, lifts, T&P etc including rigid and smooth centering, shuttering and dismantling the same after the curing of RCC work for 28 days complete the item of work in all respect as per specification and direction of Engineer-in-charge. |
| 6 | Column base & Footing |
| 7 | Plinth Bend |
| 8 | Column & Beam |
| 9 | Lintel Bend |
| 10 | Chhaja |
| 11 | Staircase |
| 12 | Roof Slab |
| 13 | Supplying, straightening coiled or bent up MS rods including cutting, bending and welding if required and tying the grills, laying and placing in proper position as per design including cost, conveyance, , . etc of tested MS/TS rod with testing data of required specification & cost of binding wires of 18 to 20 gauge, labour, T&P required for the work complete and as per the specification and direction of the Engineer-in-charge. |
| 14 | Brick work with Fly Ash Brick in cement mortar (1:6) in superstructure including cost, conveyance, royalty, . of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge. |
| 15 | Brick work with Fly Ash Brick in cement mortar (1:4) in foundation & plinth including cost, conveyance, royalty, . of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge. |
| 16 | 2.5 cm thick grading concrete in CC (1:2:2) on roof slab with all cost, carriage, royality etc. complete. |
| 17 | 6 mm thick cement plaster in cm (1:4) over RCC Surface with all cost conveyancy Royality etc. complete. |
| 18 | 16mm thick cement plaster (1:6) in cement mortar finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and direction of Engineer in charge. |
| 19 | 12mm thick cement plaster (1:6) in cement mortar finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and direction of Engineer in charge. |
| 20 | Supplying of MS grill gate, MS angle chowkhat of approved specification for doors and windows welded with MS sheet shutters of 18 to 20 gauge thick, openable and electrically welded with all necessary fittings including cost of all materials, labour, T&P, transportation to worksite etc all complete in all respect. |
| 21 | 2.5 cm thick Artificial Flooring in CC (1:2:4)Including cement Punning using 12mm size HG chips with all cost, carriage, royality etc. complete. |
| 22 | 12 mm thick cement plaster in cm (1:4) including Cement Punning with all cost conveyancy Royality of all materials, T&P complete etc. as per specification and direction of Engineer in charge. |
| 23 | Water Bound Cement Priming one coat and shade including cleaning the surface with cost, conveyance, royality etc. complete. |
| 24 | Finishing to Distempering wall with distemper over one coat primer after finishing wall surface of weather coat paint of approved brand and approved colour including cleaning the surface with cost, conveyance, royalty . of all materials labour T&P and scaffolding as required for the work and as per specification and direction of Engineer-in-charge. |
| 25 | Finishing to walls with two coats weather coat over one coat primer after finishing wall surface of wall with weather coat paint of approved brand and approved colour including cleaning the surface with cost, conveyance, royalty . of all materials labour T&P and scaffolding as required for the work and as per specification and direction of Engineer-in-charge. |
| 26 | Painting two coats of synthetic enamel paint over a coat of primer of approved quality, brand and shade including smoothening the surface by sand paper and filler etc complete with cost, conveyance, royalty, . of all materials, labours T&P required as per specification and direction of Engineer-in-charge. |
| 27 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90m C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for completion of work in all respect as per direction of Engineer-in-charge. |
| 28 | PH Work 1) Supplying all materials, labour, T&P for fixing to walls, ceiling and floor PVC pipes class confirming to ASTM-D-1785/89 (Sch. 80) and pipe fittings of the following nomial bore with clamps including making good the wall, ceiling & floor etc. complete as per specification and direction of the Engineer-in-charge. a) 15mm ( 1/2\\" dia ) b)20mm ( 3/4\\" dia ) 2) Supplying all materials, labours, T&P & fitting & fixing U-PVC SWR soil waste ventilating pipes & fittings of the following outside diameter confirming to IS: 4985/2000 to wall with nail, bobbins and woden plug or laying in trenches including jointing with supply of approved rubber lubricant by non heat appplication method as per manufacturer's specification, testing etc. complete as per specification and direction of the Engineer-in-charge. ( Eath work in excavation in all kinds of soil and refilling of trenches to be measured and paid separately) a)110mm dia PVC Pipe b)90mm dia PVC Pipe c)110mm Dia PVC Door Bend d)110mm Dia PVC Plain Bend e)90mm Dia PVC Plain Bend f)110mm Dia PVC Vent Cowl. 3)Supplying all materials, labour, T&P and fiixng 500 mm x 440mm size Orissa Pan with cement concrete ( 1:4:8 ) using hard granite metal all complete as per specification and direction of the Engineer-in-charge. 4)Supplying all materials, labour, T&P and fiixng 10 Ltr. capacity low level flushing cistern (Slim line) with a pair of PVC braket complete with fittings such as siphonic arrangement, 15mm nominal size PVC ball valve with polythene float, PVC handle, unions, couplings for connection with inlet, out let and over flow pipes, 40mm dia PVC flush bend, 12mm dia PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc complete as per specification and drection of the Engineer-in-charge. 5)Supplying all materials, labour, T&P and fiixng 100mm size 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar 1:1 as per specification and diection of the Engineer-in-charge. 6) Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge a)500 Ltr. Capacity double layers cylindrical vertical water storage tank 7)Supplying all labour, T&P and fixing of 15mm dia CP bib cock/ Taper cock/ Long body bib cock polished bright of the following nominal sizes as per specification complete and as per the direction of the Engineer-in-charge. a)15 mm dia ( CP long body bib cock )(Parry ware) 8)Supplying all labour, T&P for fixing of brass or GMFW valve of the following nominal size with wheel as per specification etc. complete and as per the direction of the Engineer-in-charge. 9) Construction of 6'x 6' x 5' size of Septic Tank |
| 29 | EI Work 1) Surface/recessed wiring to light point with ISI marked 1.5 Sq.mm PVC S/C Al multistand copper wire in 20 mm dia PVC conduit and S/F of 5A switch mounted on M.S. Board (a) Short Point - 5 Nos. (b) Medium Point - 4 Nos. (c) Long Point - 4 Nos. 2) Surface/recessed wiring to fan point with ISI marked 1.5 Sq.mm PVC S/C Al multistand copper wire in 20 mm dia PVC conduit and S/F of 5A switch mounted on M.S. Board (a) Medium Point-3 Nos. 3) Surface/recessed wiring to 5 pin 5A plug point with ISI marked 1.5 Sq.mm PVC S/C Al multistand copper wire in 20 mm dia PVC conduit and S/F of 5A flush type socket with switch mounted on M.S. Board (a) Medium Point (b) On existing board 4) Surface/recessed wiring to sub main with S/F of ISI marked 2 x 2.5 Sq.mm PVC S/C Al/Copper wire in 20mm dia PVC conduit 5) Surface/recessed wiring to sub main with S/F of ISI marked 2 x 4 Sq. mm PVC S/C Al/Copper wire in 20mm dia PVC conduit 6) S/F of ISI marked BK angle holder with shade out without bulb - 5 nos. 7) S/F of BH Fitting with Tube - 3 Nos. 8) S/F of 1 x 20 watt streep (FL) type fitting complete with tube (Bajaj/Philips) with electronics choke, T5 Box Fitting LED (Havels) 9) S/F of ISI marked 6A M.C.B with busbar (a) 2 way 10) S/F of ISI marked 32A ICDP main switch on MS Board 11) S/F of 48\\" AC ceiling fan with regulator- 3 Nos. (Usha/Bajaj-Elegence make) 12) S/F of standard earthing as per Govt. Specification 13) S/F of service connection wire 2 X 6 Sq.mm with GI wire 14) S/F of Electronic fan Regulator-3 Nos. 15) S/F of 10A Fuse Kit Kat/Indicator -3 Nos. 16 ) S/F of 9w LED bulb -5 Nos. 17) S/F of 12\\" Exhaust fan - 1Nos. 18 ) S/F of T-5 (4x24 watt) Fitting complete. Havels/ Bajaj /Philips make. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender