Tender For Repair And Maintenance Of External Water Distribution Lines, Pump Motors And Connected Works At Cgra And Dhq-7 Paradip Under Ge (I)(Cg) Bhubaneswar
Tender Value
23 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
5 days left
EMD
46000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of External Water Distribution Lines, Pump Motors And Connected Works At Cgra And Dhq-7 Paradip Under Ge (I)(Cg) Bhubaneswar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Sep-2026 | Corrigendum No 1 | BOQ | 21-Sep-2026 |
| 2 | 21-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft soil for laying pipes complete all as specified and directed. |
| 2 | Returning and filling in soils , including spreading ,levelling ,watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 3 | Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 4 | Material and labour for cutting the existing concrete/bituminous road surface width not exceeding 30cm and making good the surface with 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finished even and fair complete over 75 mm thick PCC 1:4:8 type D2 using 40mm grade stone aggregate over consolidated/rammed earth surface complete all as specified and directed. |
| 5 | Taking out sluice valve any type and size 80mm to 150 mm including re- facing, re- grinding of shutter and re - fixing the same including providing rubber insertion sheet , gland packing rope , nuts , bolts and washers etc to make the sluice valve leak proof and free. operational complete all as specified and directed for the following sizes .Note - :- Rate of rubber insertion sheet,nut,bolts,washers etc will deemed to be included in the item rate. |
| 6 | Supply and fix in replacement of CI sluice valve flanged of class PN 1.6 conforming to IS - 14846 complete with iron wheel head , SS spindle and check nut , including jointing material such as rubber insertion nuts, bolts and washers etc complete all as specified and directed of following size : Make - Kirloskar/upadhaya/Leader/ Zoloto or eqvlnt. |
| 7 | 80 mm dia |
| 8 | 100 mm dia |
| 9 | 150 mm dia |
| 10 | Supply and fix in replacement of CI Non - Return Valves 150 mm dia bore without by pass arrangement , ISI marked , heavy duty , flanged type including rubber sheet & nut bolts etc complete all as specified and directed for the following sizes. Make - Kirloskar/Upadhaya/Leader/Zoloto or equivalent |
| 11 | Supply and fix in replacement of existing foot valve as per IS-4038 of cast iron with brass diaphragm heavy duty screwing type complete all as specified and directed of the following sizes .Make-Kirloskar/Kartar/Leader/Upadhaya |
| 12 | 100 mm dia bore pipe |
| 13 | 80 mm dia bore pipe |
| 14 | 50 mm dia bore pipe |
| 15 | M & L for construction of valve chamber in replacement of existing broken chamber of internal size 1.0 mtr x 1.0mtr x 1.0 mtr with 100 mm thick PCC (1:4:8 ) type D-2 for foundation , brick walls built in cement mortor (1:4 ), PCC 1:2:4 type B1 for coping , rendering in cement mortor 1:4 , 15 mm thick both internally and externally upto 15 cm below GL including provision of MS sheet cover using angle iron 50 x 50 x 6 mm as a frame embedded in concrete and 3 mm thick MS sheet as in cover with necessary locking arrangements duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary earth work and excavation complete all as specified and directed. |
| 16 | All as above item no 9 but of size 900x900x1000 mm internal size. |
| 17 | All as above item no 9 but of size 600x600x750 mm internal size. |
| 18 | M&L for steel surface painting with two coats of synthetic enamel paint, after surface preparation and one coat of red oxide primer and complete all as specified and directed. |
| 19 | M&L for painting of wall of repaired / existing valve pits or in any description with two coats of white wash after preparation of surafces of any description and complete all as specified and directed. |
| 20 | S&F in Replacement of Galvanized Iron water tubing \\" Medium Grade\\" with all fittings laid/fixed in trenches/wall/ceiling or laid under floor etc for following sizes. The quted rate shall be inclusive of taking down cost all so complete all as specified and directed. Make - Jindal/Tata or equivalent |
| 21 | 25 mm dia bore pipe |
| 22 | 40 mm bore pipe |
| 23 | 50 mm bore pipe |
| 24 | 80 mm bore pipe |
| 25 | Taking up & down,rethreading and refixing on existing Position of GI tube and connected fittings for the sizes of 25 mm to 80 mm and Supply only the following galvanised iron fittings ISI marked of following sizes of approved make complete all as specified and directed. |
| 26 | GI UNION 25 MM |
| 27 | GI UNION 40 MM |
| 28 | GI UNION 50 MM |
| 29 | GI SOCKET 25MM |
| 30 | GI SOCKET 40 MM |
| 31 | GI SOCKET 50 MM |
| 32 | GI NIPPLE 25 MM |
| 33 | GI flange 80 mm |
| 34 | GI flange 100 mm |
| 35 | GI TEE 25x25x25 mm |
| 36 | GI TEE 40x40x25 mm |
| 37 | GI Elbow 25mm |
| 38 | GI Elbow 40x25mm |
| 39 | GI NIPPLE 50 MM |
| 40 | Supply and fix in replacement Gun metal globe or gate valve ISI marked high pressure with iron wheel head screwed both ends for iron pipe line and fixed properly complete all as specified and directed for following sizes. Make - Zoloto/Kartar/Lakshmi/Venus or equivalent. |
| 41 | 25 mm dia bore pipe |
| 42 | 40 mm dia bore pipe |
| 43 | 50 mm dia bore pipe |
| 44 | Supply and fixing in replacement of MS Hexagonal nut and bolts, heavy duty with washer of 12mm dia and 80mm long or of any other size as required complete all as specified and directed. |
| 45 | M&L for Maintenance ,Servicing and Rewinding of burnt out Monoblock type water pump motor of capacity 10 HP with existing gauge and size of copper wire with necessary repair replacement of pump shaft , impeller and ball bearings complete all as specified and directed. |
| 46 | M&L for Maintenance ,Servicing and Rewinding of burnt out Monoblock type water pump motor of capacity 5 HP with existing gauge and size of copper wire with necessary repair replacement of pump shaft , impeller and ball bearings complete all as specified and directed. |
| 47 | M&L for Maintenance ,Servicing and Rewinding of burnt out Monoblock type water pump motor of capacity 1/2/3 HP with existing gauge and size of copper wire with necessary repair replacement of pump shaft , impeller and ball bearings complete all as specified and directed. |
| 48 | Supply and Fixing in replacement of Panel mounted/ DOL Air Break Motor Starter 3 phase 415 volt 50 Hz Contactor Size 18 with overloading range of 13.0 Amps - 18.0 Amps to be fixed in existing panel Suitable for 10 HP 3 Phase Motor complete all as specified and directed. Make:- L&T/Havells/Legrand |
| 49 | Supply and Fixing in replacement of Panel mounted/ DOL Air Break Motor Starter 3 phase 415 volt 50 Hz Contactor Size 12 with overloading range of 7.0 Amps - 10.0 Amps to be fixed in existing panel Suitable for 5.0 HP 3 Phase Motor complete all as specified and directed. Make:- L&T/Havells/Legrand |
| 50 | S&F in replacement for 100 ltrs capacity FRP solution preparation cum settling tank fitted with lid, inlet / outlet connection, sludge deposition facility and S S – 316 agitator Make Rmco Model No: CDS – 100 with CHEMINJECT dosing pump electromagnetic, diaphragm type with accessories like: Foot valve, N R V, suction / discharge tube and capacity 10 lph / 10 kgs complete all as specified and directed. Make: Rmco Model: RB - 11 |
| 51 | M & L for replacement of gland packing of any size suiatble for existing pump complete all as specified and directed. |
| 52 | Suply only Crystal type white Amonia Alum Grade-1 quality suitable for water treatment plant complete all as specified and directed. |
| 53 | Suply only chemicals soda Ash suitable for water treatment plant complete all as specified and directed. |
| 54 | Suply only Sodium Hypochloride suitable for water treatment plant complete all as specified and directed. |
| 55 | M & L for Saddeling 3mm thick of water Supply Pipe Line 50 mm Dia up to 9 Story Building complete all as specified and directed. |
| 56 | M&L for Painting of 80/100/150 mm dia Pipe Line up to 9 story Building with two coats of synthetic enamel paint, Blue/Red Colour (1st quality) over a coat of primer by preparing the surface area by rubbing and scraping old rusted areas complete all as specified and directed. |
| 57 | M & L for closing water supply suction and delivery valve to the under ground sump of capacity 100000 ltr X 3 tank , cleaning and removing all dirty/muddy water from the sump using diesel driven non clogging pump, removing mud deposited on tank floor, scrubbing the inside walls using wire brushes, brooms to remove all fungus, scale formations, cleaning the inner surfaces of sump using bleaching powder and washing internal surface of the walls and applying one coat of white wash to the internal surface of sump writing details of tank like date of cleaning, due date of next cleaning and capacity of tank etc. on the out side of the tank with synthetic enamel paint with letter size 20 CM in white colour over black background of size 100x60CM complete all as specified and directed. |
| 58 | M & L for closing water supply suction and delivery valve to the under ground sump of capacity up to 100000 ltr , cleaning and removing all dirty/muddy water from the sump using diesel driven non clogging pump, removing mud deposited on tank floor, scrubbing the inside walls using wire brushes, brooms to remove all fungus, scale formations, cleaning the inner surfaces of sump using bleaching powder and washing internal surface of the walls and applying one coat of white wash to the internal surface of sump writing details of tank like date of cleaning, due date of next cleaning and capacity of tank etc. on the out side of the tank with synthetic enamel paint with letter size 20 CM in white colour over black background of size 100x60CM complete all as specified and directed. |
| 59 | M&L for Repairing ,Maintenance and Servicing of Monoblock type water pump motor of capacity 25 HP necessary parts replacement pump shaft , impeller ,winding and ball bearings complete all as specified and directed. |
| 60 | M&L for Repairing ,Maintenance and Servicing of Monoblock type water pump motor of capacity 60 HP necessary parts replacement pump shaft , impeller,winding and ball bearings complete all as specified and directed. |
| 61 | M&L for Repairing ,Maintenance and Servicing Jocky type Fire Fighting pump motor of capacity 15 HP necessary parts replacement of pump shaft , impeller and ball bearings complete all as specified and directed. |
| 62 | Supply & Fix water flow meter Suitable for 100 mm dia Pipe line complete all as specified and directed. |
| 63 | Supply & Fix water flow meter Suitable for 80 mm dia Pipe line complete all as specified and directed. |
| 64 | Material and labour for taking up unsrvicebale CI/DI water mains with spigot and socket ends of any class including all fittings 80mm dia bore pipe complete all as specified and directed. |
| 65 | Supply and lay pipe Cast iron pipes of size 80mm dia with spigot and socket ends centrifugally cast. Class A, in any length, laid in trenches for tyton joint or any length properly laid in trenches acomplete all as specified and directed. |
| 66 | Material and labour for caulking to the existing Rubber gasket joint complete to make it leak proof by insertion of lead wool of required quantity complete all as specified and directed for the following sizes .Note : - Earth work and excavation will be measured and paid separately. |
| 67 | 80 mm bore of pipe |
| 68 | 100 mm boer of pipe |
| 69 | 150 mm bore of pipe |
| 70 | Supply and fix CI fitting for spigot socketed pipe , bends ( any type , radius and angle ) tapers any type , (straight , bend increasing , decreasing or double socket etc ) tee pieces single branch , Y junction double branch , cross of size - up to 100 mm dia complete all as specified and directed. Note : - Earth work and excavation will be measured and paid separately. |
| 71 | Cutting of DI/CI mains in position for insertion of new tees, tail pieces , sluice valve of Size 80mm dia bore pipe etc complete all as specified and directed. |
| 72 | Supply and Fixing Pressure gauge 80mm dia 0-14 kgs complete all as specified and directed. |
| 73 | M&L for Repair, maintenacec and Servising of Iron Removal Plant and replacement of Following Items complete all as specified and directed. |
| 74 | Media ( gravels, Pabals) |
| 75 | Media coarse sand |
| 76 | Media fine sand |
| 77 | Activated carbon 900IV |
| 78 | Water Filter SP 30- Spun Cartridege size 2.5\\" x 30\\" Make:- Darlly Suitable for SS 407 SS housing to cummulate for 7 housing of 40 inch for flow 20000 Ltrs/Hr MOC SS 304 complete all as specified and directed. |
| 79 | M&L For Painting for iron removal Plant with two coats of synthetic enamel paint, Blue/Red Colour (1st quality) over a coat of primer by preparing the surface area by rubbing and scraping old rusted areas complete all as specified and directed. Please Enable Macros to View BoQ information |
| 80 | M&L For Painting for iron removal Plant with two coats of synthetic enamel paint, Blue/Red Colour (1st quality) over a coat of primer by preparing the surface area by rubbing and scraping old rusted areas complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 28, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender