Tender For special Repair To Drain At 1811 Pioneer Unit And Provn Of Certain Sanctioned Minor Works And Revenue Works In The Area Of Age B/R-Ii Under Ge(West) Delhi Cantt-10
Tender Value
48.90 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
0 days left
EMD
97800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Drain At 1811 Pioneer Unit And Provn Of Certain Sanctioned Minor Works And Revenue Works In The Area Of Age B/R-Ii Under Ge(West) Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortor including all quoins, arches, pillars etc. complete all as specified and directed. |
| 2 | M&L brick work with subs class old burnt \\"B\\" bricks straight or curved on plan exc 6 mtr mean radius built in cement mortor (1:6). complete all as specified and directed. |
| 3 | All as per Srl item no 02 above but except bricks |
| 4 | M&L brick work with sub class old burnt \\"B\\" bricks, straight or curved on plan to any radius in half brick wall, built in cement mortor (1:4) complete all as specified and directed. |
| 5 | Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and as directed. |
| 6 | M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar 1:4 surface finished even and smooth complete all as specified and as directed. |
| 7 | M&L preparation of newly plastered surfaces of wall and applying two coats of white wash complete all as specified and as directed. |
| 8 | Cleaning of drains of inner width uptp 0.75 m and depth upto. 1.2mtr by removing mud, garbage, debries, sludge, vegitation etc by manually or machnically including shifting of drain cover before and after work complete all as specified and directed. |
| 9 | M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate)as in surface channels and drains incl all moulds and forms all as spd and directed. |
| 10 | Extra for forming fair finished drain or channel inner girth n.exc 30 CM in cement, concrete using extra cement including forms, moulds, mitred/stopped ends etc complete. |
| 11 | M&L for cutting of road as required for laying RCC pipe line including repair/make good with filling of earth, boulders, WBM, BM etc. with top surface finished with 30mm thick ready mixed patch filter, complete all as specified and as directed. |
| 12 | S&F 300 mm dia reinforced concrete pipes, class NP2 with collar per length of pipe laid in trenches complete all specified and directed. |
| 13 | M&L for 200 mm nominal size Double wall corrugated HDPE pipes stiffness class SN 8 high density,polyethylene pipe resistent to chemicals,easy and light weighted,long living, low friction,flexible,sun resistant pipe and laid in trenches including taking down of any type of old pipe complete all as specified and as directed. |
| 14 | M&L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair (75mm thick) with using extra cement , laid in bays, joints filled with mixture of bitumen and sand ( 1:1) complete all as specified and as directed. |
| 15 | M&L for PCC 1:4:8 type D-2 (40mm gde stone agg) as in concrete bed to RCC drain pipes including packing under and hunching against side of pipes with concrete after they are laid and join ted, dia of pipe 300mm complete as specified and directed by Engr-in-Charge. |
| 16 | Excavation in trenches width n'exc 1.5 m and not exceeding 1.5m deep and getting out in soft / loose soil all as specified and directed.Note:-Insurance of workmen & cleaning of site, removal of all hinderance's/obstractions unforseen item, Electric cable, Gas Pipe line etc permisssion from other department should be responsibility of contractor (MES will only assist in getting permission etc) restoring and getting the same constructed/Repaired/Replacement complete & nothing extra shall be payable. |
| 17 | Material and labour for 75 mm thick PCC (1:4:8) type C2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed. |
| 18 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including demolition of old paver block or stone slab complete all as specified and as directed. |
| 19 | M &L for 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 20 | M&L for Chequred cement concrete tiles (300x300x25mm thick) with grey cement & pigment set jointed and pointed in neat cement slurry in floors including demolition of PCC tiles and removing debrish beyond MOD land complete all as specified and directed. |
| 21 | M&L for preparation of new surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and as directed. Note : Colour / shade as approved by GE. |
| 22 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping/bed block including weathering slightly rounded or chamfered angles and throating as directed and including necessary form work required complete all as specified and as directed. |
| 23 | M&L for Hardcore of broken stones of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed. |
| 24 | Returning ,filling in, includidng spreading , levelling , watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 25 | Removing excavated materials exc 250m and n exc 500 m and depositing where directed, complete all as specified and directed. |
| 26 | Demolition of cement concrete (reinforced) of any description and as in Drain/Manhole cover, shelves, RCC Chajja etc not other specifically provided for complete all as specified and directed. |
| 27 | S&F factory made 75mm thick SFRC manhole/ Drain covers with frame (heavy duty) HD-20 graded designation, confirming to IS-12592, area not exc. 0.90 Sqm each, fixed in cement concrete 1:2:4 using 20mm graded stone aggregate complete all as specified and directed. |
| 28 | M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in foundation filling, sub base for floors etc complete all as specified and directed by Engr-in-Charge. |
| 29 | Use & waste of formwork to sides of concrete foundations,footings,bases or column,raft and raft beams,sides and soffits if any of foundations and plinth beams and similar work,vertical or batter for flat rough finished surface of concrete complete all as specified and directed by Engr-in-Charge. |
| 30 | Use & waste of formwork to sides of pillars,posts,struts,piers,columns and stanchions etc rough finished for square/rectangular or polygonal surfaces of concrete complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L of TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 32 | Ditto all as per item No 31 above but 5 mm dia and over upto and including 10 mm dia in stirrups spaces and binders complete all as specified and directed. |
| 33 | M&L for 10mm thick cement plaster in cement mortar 1:6 on brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for Preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of chalk whiting primer complete all as specified and directed. |
| 35 | S&F rolled mild steel work in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed. |
| 36 | S&F of Fe 410-W(Gde-E-250) quality-A mild steel plates, plain or chequered , 5mm thick or over in thickness in available sizes complete all as specified & directed. |
| 37 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long diameter of neck 11 to 15mm complete all as specified and as directed. |
| 38 | S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet (150 GSM) 0.50 mm thick of any colour as approved by GE having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as spd & directed. |
| 39 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet(150 GSM) 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as spd & directed. |
| 40 | Designing providing and fixing 4mm thick Aluminium composite cladding over RCC/BRICK/steel surfaces either segmental/straight in plan wherever specified with extruded aluminium u sections ,angles,cleats ,weather sealants, backer rods of required size stainless steel screws, rivets , brackets, drilling and fixing the cladding to either masonary or reinforced cement concrete including frame work as required and as per manufacturer's instructions, complete the work in all respect including all necessary accessories. At all soffits aluminium cladding shall be bend 90 degree and joints at corner or edges will not be acceptable on horizontal surface, the size also converted the shape in awning to the face as approved desiged complete all as per manufacturer's specifications and as directed. |
| 41 | M&L for preparation of new steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as spd & directed. |
| 42 | Taking up or down 15 mm bore dia steel tubing and connections, including cleaning for refixing or removal to store including cutting chasis if required complete all as specified and as directed. |
| 43 | S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor including taking down complete in all respect as specified. |
| 44 | Taking up or down 20mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 45 | S&F 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor including taking down complete in all respect as specified. |
| 46 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, including dismantling water tank complete all as specified and directed. |
| 47 | S&F 1000 ltrs capacity rotational molded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, including dismantling water tank complete all as specified and directed. |
| 48 | Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and directed. |
| 49 | S&F Aluminium door single leaf with powder coated aluminium frame of section 62.5x37x1.5mm thick, shutter with bottom & middle rail of section 112.50x 37x1.5mm thick and styles & top rail of section 83x37x1.5mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5mm thick frosted glass including necessary fittings, fixtures & aluminium snap beads, complete all as specified and directed. |
| 50 | Taking down door/window/ventilator frames with shutters exc 1.50 sqm but not exc 4.00 sqm each.(without taking off shutters from frame) complete all as specified and directed. |
| 51 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, complete all as specified and adirected. |
| 52 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded etc. with suitable PVC sheet beading including hinges etc complete all as specified and directed. |
| 53 | S&F anodised aluminium ventilator with aluminium anodised frame of aluminium section 62.50 mm x 37 mm x 1.5mm thick and with top hung shutter having style and rails of aluminium section 47.62 mm x 44.45 mm x 1.5 mm thick and shutter wire gauzed and bottom half portion of shutter fixed type and glazed glass pane without sash bars including necessary joining cleats,glazing clips,rubber packing, anodized, aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long, handles and 100mm long SS hinges etc complete all as specified and directed. |
| 54 | S&F powder coated aluminum sliding windows three track section (size 92mm x 31075mmx 2.00mm) weight not less than 1.864 Kg/m and shutter size 14.70mmx43mm with aluminium anodised frame (chowkhat) of aluminium section 104.00mmx44.45mmx1.80mm thick and two shutter having 14.80 nn thick tinteg glass and one shutter stainless steel wire of dia 0.36 mm and average width of aperture 1.40 mm complete all as specified and directed. |
| 55 | Dismantling of asbestos cement (corrugated semi corrugated sheet & ridge in roof covering complete all as specified and directed. |
| 56 | Dismantling wrought iron or mild steel work of any description not otherwise provided for steel and iron work complete all as specified and as directed. |
| 57 | M&L for false ceiling with 600mmx600mmx4mm thick 'E' board classic of M/S Eternit Everest Ltd or Charminar make as approved by GE, fixed with and including galvanized iron powder coated inverted 'Tee\\" or 'L' sections (concealed GI/aluminium frame work) of 'Cicage' metallic or equivalent suspended from ceiling with provision of galvanized iron wire 45 mm dia and self tapping screws including butterfly clips, hold down clips for fixing the boards to frame complete all as pe manufacturer's instructions and all as directed including demolition of old ceiling.(a) Size of Main Tee- 39x24.7x0.8mm(b) Size of Cross Tee- 29x24.7x0.8mm(c) Size of wall angle - 22.2x22.2x0.65mm(d) Butter fly clip(e) Hold down clip(f) Size of grid 1.22mx0.61m |
| 58 | S&F Aluminium Partition single leaf with powder coated aluminium frame of section 62.5x37x1.5mm thick, ACP panel shutter with bottom & top rail of section with rebate including jointing cleats, fixing of builders hardware fittings, necessary middle portion glazing with 5mm thick tinted/froasted /plain glass including necessary fittings, fixtures & aluminium snap beads, including demolition of old partition complete all as specified and directed. |
| 59 | M&L for 10mm thick rendering of ready mix plaster of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc and applying two coats of Oil Bound Distemper complete all as specified and directed. |
| 60 | M&L for 5mm thick rendering of ready mix plaster of approved make on soffit of Rcc slab/ceiling/beams, finish the surface even and smooth without using extra cement as whole or in patch etc and applying three coat of white wash complete all as specified and directed. |
| 61 | M&L Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:4) laying floor finish including dismantling of existing tiles or terrazo finish including cement mortar bedding of any thickness complete all as specified and directed. |
| 62 | M&L Glazed ceramic coloured joint free tiles of size 450mmx300mm ,300X600mm and 450X600 mm 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish beyond MOD land complete all as specified and as directed. |
| 63 | M&L for vitrified ceramic tiles light shade 7 to 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes including dismantling of existing tiles or terrazo finish complete all as specified and as direcetd. |
| 64 | Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level), removal of rubbish beyond MOD land complete all as specified and directed. |
| 65 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed. |
| 66 | S&F in repair Vitreous China urinals, Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including Urinal spreader of PTMT any colour forfixing with 15 mm dia pipe. (Minimum weight 60gms) including PVC Connection 15mm size 450mm length complete all as specified and as directed. |
| 67 | S&F in repairs Vitreous China wash hand basin, white, flat back, size 550X400mm excluding excluding taps, waste, chain and plug and porcelain stopper but including brackets and PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 68 | S&F in repair vitreous One peice (European type) water closet pan white with cast iron \\"P\\" or 'S\\" trap 220mm including provn of fixing bolt and plastic seat cover heavy duty with hinging device including provn of jet complete all as specified and as directed. |
| 69 | S&F in repair vitreous pedestal pattern (European type) water closet pan white with cast iron \\"P\\" or 'S\\" trap 100mm including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe including provn of jet complete all as specified and as directed. |
| 70 | S&F in repairs Vitreous China free standing pedestal wash hand basin, white, flat back, size 550X400mm excluding excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed. |
| 71 | S&F 32mm dia and 90 cm long PVC waste pipe complete all as specified and directed. |
| 72 | S&F CP brass 2-in-1 center Hole Basin Mixer with connection pipe and fittings complete all as specified and as directed. |
| 73 | S&F in repair 15mm dia wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. |
| 74 | S&F in repair sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed. |
| 75 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified |
| 76 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 77 | S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified. |
| 78 | S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 79 | S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Concealed type) with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 80 | S&F in repair 15mm bore bib taps chromium plated fancy type cast copper, screwed down, screwed for iron pipe or for brass ferrule & fixed for GI pipe including complete all as specified and directed. |
| 81 | S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union fixed in repairs complete all as specified and directed. |
| 82 | S&F in repairs 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 83 | M&L looking mirror size 600x450mm bevelled edge mirror of selected qualaity mounted on 6mm commercial plywood and fixed with brass screw and cup washer complete all as specified and directed. |
| 84 | S&F CP soap dish fixed to wall with brass screw complete all as specified and directed. |
| 85 | S&F tubular towel rails 20mm dia, D type 60cm long between flanges of brass chromium plated. |
| 86 | S&F 20mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified. |
| 87 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down pipes (any size or pattern), with all fittings viz. heads, shoes, bends, swan-necks etc, removal rubbish beyond MOD land complete all as specified and directed. |
| 88 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down pipes (any size or pattern), with all fittings viz. heads, shoes, bends, swan-necks etc, removal rubbish beyond MOD land complete all as specified and directed. |
| 89 | S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 90 | S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 91 | M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and as directed. |
| 92 | S&F Welded steel wire fabric weight n. exc 4kg per sqm complete to wood or steel members including cutting, welding, notching etc. complete all as specified and as direceted. |
| 93 | M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed. |
| 94 | S&F in repair 15 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 95 | S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 96 | S&F in repairs 20mm GI nipple suitable for HDPE water tank complete all as specified and directed. |
| 97 | S&F in repairs water tank lid for 500 ltr capacity complete all as specified and directed. |
| 98 | M&L for 10mm thick rendering in cm 1:4 on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. |
| 99 | M&L for preparation of new plastered surface of external wall and making the surface smooth with sand paper and priming the surface wih alkali resistance priming paint for external surface and applying two coat of cement base paint including curing , complete all as specified and directed. |
| 100 | Excavating in post holes (or similar holes) each n exc 0.50 cu. m, getting out, including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft / loose soil ,complete all as specified and directed. |
| 101 | S&F MS work as in post and struts in fencing work including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including flat iron fillets (for securing and fixing chain link fencing any type etc.) any size as per site requirement, including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 102 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed. stone aggregate) as in foundation filling and mass concrete complete all as specified |
| 103 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed. |
| 104 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 105 | S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed together or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Diameter of shank in 11 to 15mm complete all as specified and as directed. |
| 106 | M & L MS round bar 10mm dia and over cut to length, bent to shape required including cracking, bending spirally and including Mild steel wire not less than 0.9mm dia or securing with clips quality conforming to Fe-410-IS 432 (Part I) Part- I complete all as specified and as directed. |
| 107 | M & L for reinforced cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate (nominal mix) in foundations, including rafts, footings, foundation beams; Plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified as directed by Engineer-in Charge. |
| 108 | M & L for reinforced cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate (nominal mix) in columns, pillars, piers, posts and struts complete all as specified as directed by Engineer-in Charge |
| 109 | M&L for PCC 1:2:4 type B-1(Using 20 mm graded crushed stone agg) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified as directed |
| 110 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (FE 410-S) including old unserviceable wooden gate complete all as specified and directed. |
| 111 | M&L for 18 to 20mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing and making hole in the platform for gas connection complete and incl nosing of the edges half round complete all as specified and directed. |
| 112 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and as directed. |
| 113 | Excavation over areas not exceeding 1.5m deep and getting out in soft/ loose soil complete all as specified and directed. |
| 114 | Excavating over areas exceeding 1.5m but n. exc 3.00m in depth and gating out in soft/ loose soil complete all as specified and directed. |
| 115 | Excavating over areas exceeding 3.00m but n. exc 4.50m in depth and gating out in soft/ loose soil all as specifed. |
| 116 | Material and labour for brickwork with old size sub class `B' bricks straight orcurved on plan not exceeding 6m mean radius as in walls in cement mortar 1:6 complete all as specified and directed. |
| 117 | M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and directed. |
| 118 | M&L for RCC (Nominal Mix) type B1 1:1 1/2:3 (20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 119 | M & L for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exceeding 200mm thk horizontal or sloping, flat and rough finished surface of concrete complete all as specified. |
| 120 | High strength steel deformed TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. Complete |
| 121 | M&L for 300 mm nominal size Double wall corrugated HDPE pipes stiffness class SN 8 high density, polyethylene pipe resistent to chemicals, easy and light weighted, long living, low friction, flexible, sun resistant pipe and laid in trenches including taking down of any type of old pipe complete all as specified and as directed. |
| 122 | M&L for cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) in bed of drain pipe 300 mm bore pipe including forming cradles at joints complete all as specified and as directed. Note : Thickness of bed below the barrel of pipes 100 mm for pipes 300mm dia and width D+300mm. |
| 123 | S&F factory made RCC GT Cover of Size 400mm x 500mmx 50mm thick or as per site requirement with 01 No handle and 150mm dia notch at one side of cover at center at 500mm long side complete all as specified and as directed. |
| 124 | M&L for 15mm thick cement plaster in cement mortar 1:6 on brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 125 | M&L for PCC 1:2:4 type B-1 (20 mm graded stone aggre) as in bed blocks for gola, hold fast, roof padding/flooring, coping bedding rounded or chamfered and similar work etc., complete all as specified and directed. |
| 126 | Cutting into existing manholes for connecting new drains 150mm dia,making good to pipe & rendering,cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished & reforming benching as required complete all as specified and directed. |
| 127 | M&L point wiring with PVC insulated FRLSH 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor two run and drawing in & including PVC casing and caping on surface, FRLSH grade, ISI marked, terminal box of suitable thickness and with 3 mm thick hylam sheet cover as required cutting for terminal boxes also including provision of earth wire PVC insulated FRLSH 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly and making good to the disturb surfaces with cement, matching with existing color by painting all as specified for the following:- One light/fan/bell point controlled by one by one way switch (switch to be measured and paid separtely) |
| 128 | Material & Labour for point wiring with 2.5 sqmm (nominal size) single core, 1100 Volts grade, multi stranded, PVC insulated, unsheathed FRLSH electrolytic copper conductor cable conforming to IS 694:2010 with and including continuous earth wire of size 2.5 sqmm (nominal size) single core, 1100 Volts grade, multi stranded, PVC insulated, unsheathed, FRLSH electrolytic copper conductor cable and connected to earth dolly, colour coded as per IS 11353:1985 drawn through an including concealed medium grade, PVC conduit of 20 mm dia (Nominal bore) or higher, minimum wall thickness 1.6 mm conforming to IS 9537(Part 3):1983 for conduits complete with and including all conduit accessories (conforming to IS 3419:1988 for conduit accessories) and factory made not less than 1.2 mm thick sunken modular flush sheet galvanised metal enclosure having zinc coating not less than 120 GSM conforming to IS 14772:2000 having bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover plate with frame and making good of disturbed surfaces of wall/ceiling/floor etc complete all as specified in IS 732:2019 and directed by Engr-in-Charge at site for the following :- |
| 129 | One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. (Switch and socket to be measured and paid separately) |
| 130 | S&F Modular switch 1 way 6A,1 module, 230V, 50 Hz complete all as specified and directed. |
| 131 | S&F Modular socket 6A- 3 pin combined 2 module,230V, 50 Hz complete all as specified and directed. |
| 132 | S&F in repair , 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC armoured, PVC sheathed 6 sq. mm nominal cross section, 2 core complete all as specified and directed. |
| 133 | S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. |
| 134 | S&F of surface mounting LED aluminium Batten 20W LED light. Fixture should have minimum efficacy at system level >=110 lumens/Watt, life of fixture not less than 50K Hrs,CCT 4000-6500K & CRI>80, PF≥0.90. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
| 135 | S&F of factory made epoxy polyester powder coated distribution board SP & N 4 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 2 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 including taking down old DBs all as specified and directed.NOTE :-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 136 | S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity conforming to IEC 60898-1:2002 complete all as specified and directed. |
| 137 | S&F of SPN MCB 32 Amps, 240V, 50 Hz AC made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10KA breaking capacity conforming to IEC 60898-1:2002 complete all as specified and directed. |
| 138 | S & F 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor copper wound, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.50, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS 374:2019), THD less than 10%, remote unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete. |
| 139 | S&F wall mounting fan 450 mm sweep, suitable for operation on 230 Volts, 50 Hz, single phase AC supply, energy efficient, copper wound motor with double ball bearing, oscillating type, complete with aerodynamically balanced aluminium/PP blades, powder coated safety guard, pull cord/knob for oscillation, wall mounting bracket, capacitor, speed regulator, necessary hardware for fixing, internal connections, testing and commissioning complete all as specified and directed. |
| 140 | S&F of 35 watts 230 V AC outdoor type with High efficient LED Building security light fitting with high pressure die cast Aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 protection, complete with bracket made out of 40 mm GI pipe light grade 1.2 mtr long bend to shape with clamps and fixing bolts all as specified and directed. |
| 141 | M&L in replacement of earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.50 m below GL) connected with GI earth lead wire 4.0 mm as earthing leads by means of bolts, nuts, check nuts and washers all joints as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1 chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodaySep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender