Tender For Addition & Alteration To (P-6) Swagat Building Under Ge Navy Porbandar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Sep 2026
20 days left
EMD
82200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Porbandar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition & Alteration To (P-6) Swagat Building Under Ge Navy Porbandar
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deep & averaging 15 cm deep and getting out in Hard / dense soil complete all as specified. |
| 2 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/disintigrated rock complete all as specified. |
| 3 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/disintigrated rock complete all as specified. |
| 4 | Removing excavated soil n exc. 1.5 km but not exceeding 5 km depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 5 | M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) |
| 6 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified. |
| 7 | M & L RCC- M-30 (Design Mix) using 20mm graded aggregate for Foundation, Beams, columns Including rafts as Mass Concrete complete all as specified. |
| 8 | M & L RCC- M-30 (Design Mix) using 20mm graded aggregate for Column, Plinth Beam, chajjas and Slab |
| 9 | S & F CRS bars 10mm dia & over of Grade Fe 500D incl cutting, bending, binding & placing in position with binding wire. |
| 10 | S & F CRS stirrups bars 8mm dia of Grade Fe 500D incl cutting, bending, binding & placing in position with binding wire. |
| 11 | Use & Waste of form work for rough finished surfaces of concrete measured flat for foundation |
| 12 | M&L Squared rubble walling with Porbandar stone masonary in CM 1:6 brought to courses, complete all as specified & directed by Engr-in-charge. |
| 13 | M&L Rendering 10mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:6) to be finished even and smooth (without using extra cement) complete all as specified and directed. |
| 14 | M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) to be finished even and smooth (without using extra cement) complete all as specified and directed. |
| 15 | M&L for preparation of new plastered surface and applying two coat of acrylic external emulsion paint over a coat of primer complete as specified and directed. |
| 16 | M&L for applying two coats of Oil bound distember/water based distemper over a coat of primer including applying Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer in Charge |
| 17 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified. |
| 18 | M&L for 100mm thick hardcore of broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complte all as specified and as directed. |
| 19 | M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate in floors, sub floors complte all as specified and as directed. |
| 20 | M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate in plinth protection with finished even & smooth without using extra cement complte all as specified and as directed. |
| 21 | M & L for Glazed ceramic tiles, coloured (light colour as approved), of size 300x 600 OR 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 22 | M & L for Non Skid Ceramic coloured (colour & shade as approved) tiles non skid thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 23 | M&L for Light shade vitrified ceramic tiles, premium quality, coloured (of approved shade and design), 10mm thick, of superior quality, (square / rectangular) polished, area of each tiles not exceeding 0.36sqm,joint free, as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles ,laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 24 | All as per item No.23.00 above but vertical surfaces such as skirting, dados etcincluding screed bed layer 10mm thick in cement mortar 1:3 finished even and rough for receiving tiles on vertical surfaces complete all as specified. |
| 25 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed by Engr-in-charge. |
| 26 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified & directed by Engr-in-charge. |
| 27 | S&F 5 mm thick plain colour PVC sheet in partitions, inclusive of fixing to frame, complete all as directed by Engineer -in-Charge |
| 28 | S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified & directed by Engr-in-charge. |
| 29 | S&F Mild steel mortice lock, 2 lever, vertical type, size 100 mm complete all as specified & directed by Engr-in-charge. |
| 30 | S&F in door closer hydraulically regulated, aluminium extruded section designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed by Engr-in-charge. |
| 31 | S&F 150mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed all as specified and directed. |
| 32 | S&F 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type,anodised all as specified. |
| 33 | S&F 100mm Butt hinges(Size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed all as specified. |
| 34 | S&F 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. |
| 35 | M&L for 20mm Granite (of any type) work table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite |
| 36 | Supplying and laying of bore 25mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling etc complete all as specified and as directed. |
| 37 | Supplying and laying of bore 20mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling etc complete all as specified and as directed. |
| 38 | S&F (Angle Valve) 15mm bore size chromium plated fancy type complete all as specified. |
| 39 | S&F Fancy type bib taps, long shank chromium plated cast copper alloy 15mm bore with crutch screwed down and fixed complete all as specified and as directed. |
| 40 | S&F CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed complete all as specified and as directed. |
| 41 | S & F Vitreous china wash basin, min size 550 x 400 mm including waste pipe and waste coupling of chromium plated , brackets and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug . Make:- Cera or equivalent complete all as specified and as directed. |
| 42 | S&F Vitreous China Water closet (Squatt pattern) squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests,com plete including provision of lime concrete (excluding flushing cistern & flush pipe) bedding complete all as directed by Engr-in-Charge. Make:- Cera or equivalent |
| 43 | S&F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed. |
| 44 | S&F 10 litres capacity PVC flushing tank, syphonic action type, high / low level, valveless, with PVC inlet ball valve, PVC flush pipe, float, including taking down / dismantling old unserviceable flush tank (any type) and disposing off complete all as specified and as directed. |
| 45 | M & L for concrete bed 1 : 3 : 6 type C2 for drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed. |
| 46 | M&L for Reinforced concrete pipes,150mm dia class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 47 | S&F swivel shower 100mm dia with arm 15mm bore, 195 mm long with bend of 45 degreee with flange of PTMT any colour for fixing with 15mm pipe |
| 48 | S&F Health faucet (ABS chrome plated) with 1 mtr long flexiable tube & wall hook complete all as specified and directed. |
| 49 | S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position all as specified and directedin SSR Pt I |
| 50 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed |
| 51 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors |
| 52 | S&F PVC (SWR) bends any radius laid in trenches of nominal bore 75 mm complete all as specified and directed |
| 53 | S&F PVC (SWR) branch piece, double (double Y), equal or unequal 110mm dia complete all as specified and directed. |
| 54 | M&L PVC (SWR) multifloor trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed. |
| 55 | M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed. |
| 56 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 57 | S&F PVC (SWR) bends any radius laid in trenches of nominal bore 75 mm complete all as specified and directed. |
| 58 | S & F Gl frame work (Size of Grid 605 x 605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed |
| 59 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for false ceiling snap grid of size 605 x 605 mm complete all as specified and directed by Engr in Charge. |
| 60 | S&F Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat/curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh including any sunk or raised mouldings (fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed |
| 61 | M&L for 10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, add WPC @3% of cement weight(WPC paid separately), finished even and smooth without using extra cement complete all as specified and as directed.(Note:- Polymeric membrane will be measured and paid separately) |
| 62 | M&L for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment/ specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 4 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non wovwn polyster fabric or weight not less 160 gms per sqm. (Note:- (i) Laying of APP based membrane shall be done by torch on method or as per manufacturers instruction. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instruction. (c ) Applying two coats of reflective Bituminous aluminium paint on top of APP membrane. |
| 63 | Taking down old point wiring complete for (light, fan, socket 5/15 amps, bell point etc) complete with all light fittings accessories , such as switches,sockets 5/15 Amps, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc all as speified and directed by Engineer -In-Charge. |
| 64 | Material and labour point wiring with 1.5 sqmm (nominal cross section area) single core PVC insulated unsheathed cable of 1100 Volts grade (FRLS) multistrand with copper conductor drawn through and including non metallic, rigid PVC conduit of adequate size with all fittings and conduit accessories concealed in wall/ceiling/floor/roof etc. including 1.6 mm thick sunk mild steel terminal box with 3mm thick plastic laminated sheet top cover, cadmium plated iron screws for housing the switches, socket outlets including provision of 1.5 sqmm green in colour PVC insulated copper conductor single core multistrand (FRLS) for earth continuity conductor and connected to common earth dolly all as specified for the following:- |
| 65 | (a) One light point control by one switch |
| 66 | (b) One ceiling fan/exhaust fan control by one switch |
| 67 | (c) One security light point control by one switch |
| 68 | All as per item No.64.00 above but wire 2.5 sq mm cable for One 3 pin socket 5 Amps on the same board with other switches. |
| 69 | All as per item No.64.00 above but wire 2.5 sq mm cable for One 3 pin socket 5 Amps socket as independent board. |
| 70 | All as per item No.64.00 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sqmm as earth continuity conductor. |
| 71 | S & F in replacement Modular switch 1 way 6A, 1 module all as specified and directed by EIC. |
| 72 | S & F in replacement modular socket, Socket, 6A - 2/3 pin combined 2 module all as specified and directed by EIC. |
| 73 | S & F in replacement Socket 16A - 2/3 pin combined 2 module, all as specified and directed by EIC. |
| 74 | S & F in replacement Modular switch 1 way 16A, 1 module all as specified and directed by EIC. |
| 75 | S & F in replacement ceiling rose three terminal ll as specified and directed by EIC. |
| 76 | S & F in replacement Modular fan regulator120Watt, 2- module , AC 240 Volts complete. |
| 77 | Supply and fix ceiling fan 1200 mm sweep 230 V AC, 5 Star rated with brushless direct current motor (BLDC) complete including connecting up with 3 core cord flexible from ceiling rose to fan etc all as specified and directed by Engr-in-charge. |
| 78 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers complete including connecting up with 3 core cord flexible from ceiling rose to exhaust fan etc. all as speified and directed by Engr-in-charge. |
| 79 | S & F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 80 | S & F in replacement LED light fitting 1x 20 Watt,220 V AC decorative box type with driver , holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 81 | S & F in replacement LED recessed downlight round/square 15 watt, 220V AC with driver, suitable false ceiling mounting, holder including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 82 | S & F in replacement LED decorative wall light 8 to 10 watt, 220V AC with holder including other accessories of light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 83 | S & F in replacement LED light fitting mirror type 1x 10 Watt,220 V AC decorative box type with driver , holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 84 | S & F in replacement LED street light fitting 35 Watt,230 V AC outdoor type with high pressure die aluminium housing and heat resistant complete with driver , lamp, with impact and corrosion resistanct including thermal management in multiple optics, including suitable size mounting bracket , clamps ,nut,bolts complete with IP 65/66 protection all as specified and directed by Engr-in-Charge. |
| 85 | Supply and fix electric water heater (HEATER), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, vent pipe, connection pipe etc all as specified and directed by Engr-in-Charge. |
| 86 | S & F in replacement MCCB DB VERTCLE TYPE made of sheet steel , powder painted with Neutral bus bar as per distribution requirement, neutral link, IP-43-IK09 protection grade ,double door 415 Volts TPN with 4 way complete all as specified and as directed. |
| 87 | S & F in replacement MCCB 4P 125 Amps , 415Volts, 16 KA complete all as specified and as directed. |
| 88 | S & FS & F in replacement MCB TP 40 to 63 Amps , 415Volts, 16 KA complete all as specified and as directed. |
| 89 | S & F in replacement MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Double door , IP-43-IK09 protection |
| 90 | S & F in replacement MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63Amps |
| 91 | M&L in replacement for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC CASING CAPING/PVC Conduit not less than suitable size dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 4.00 sqmm and one wire of 4.00 sqmm and one run of PVC casing caping/Conduit shall be measured as one unit. |
| 92 | M&L in replacement for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPING/PVC Conduit not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 6 sqmm and one wire of 6.0 sqmm and one run of PVC casing caping/Conduit shall be measured as one unit. |
| 93 | S & F in replacement MCB SP 6-32 Amps 'C' Series complete all as specified and directed. |
| 94 | M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and as dierected. |
| 95 | S & F in replacement XLPE insulated armoured and pvc sheated heavy duty electric cable ,3-1/2 core 35 Sqmm cross sectional area aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in trenches passing through pipes /ducts including testing complete all as specified and as directed. |
| 96 | Excavation in trenches in hard /dense soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc and getting out including trimming sides and forming bottom surface all as specified and directed at site. |
| 97 | Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site |
| 98 | Removing excavated surplus soil (Soft/hard soil) obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. |
| 99 | M & L for Cutting the existing PCC floor/road/foot path not exceeding 15cm width, 30 cm depth for laying of UG cable/protection of pipe all as directed. |
| 100 | M & L for PCC type B1,1:4:4 using 40 mm graded stone aggregate all as specified and directed. |
| 101 | Supply & fix Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 40 mm dia along with necessary clamp duly painted with silver aluminuim paint nut bolt etc, including PVC bend of required size for cable entry at bottom of pole complete all as specified and directed. Make -TATA / JINDAL /SWASTIK |
| 102 | S& F in replacement of laying of Double Walled Corrugated (DWC) HDPE pipe of size 40/32 mm outer/inner dia of conforming to IS 16205 Part -24 including necessary bends,coupling ,tees, reducers, spacers,end caps, rubber rings etc having pressure rating not less than 450 N through trenches/wall/floor/on pole in any type of soil for protection of electric cable complete all as directed by Engr-In Charge Make:-ASTRAL TELEREX /eqivalent as approved by GE |
| 103 | Supply, install, testing &commissioning hi wall split unit air conditioners inverter type indoor/outdoor complete including outdoor unit mounting stand, electric driven single phase, copper tube condensor coil, cordless remote control of capacity of 2 TR BEE 5 star rated complete all as specified and directed. |
| 104 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA including necessary mounting arrangement complete all as specified & directed. |
| 105 | Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with including one single pole MCB 20 Amps complete all as specified and directed. |
| 106 | Supply and fix PVC pipe 20 mm dia heavy duty inclusive of all tees,bends, elbows etc & fixing accessories for drain out condensing water of split AC including cutting of floor/opening of hole in wall and making good after laying of pipe etc to match the existing surface complete. |
| 107 | M&L for sub main wiring of size 4 sq mm 2 core (FRLS) along with earth wire of 4 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC casing caping /Conduit of suitable size complete all as specified and directed. |
| 108 | Cutting existing galvanised iron pipe 50mm bore in position for insertion of new pipe/tees, branches etc. |
| 109 | Supply and fixing GI water tubing medium grade 25mm dia bore laying in trenches complete including necessary all GI fittings such as bends, elbows, tees, reducer, unions etc |
| 110 | Supply and fixing GI water tubing light grade 25mm dia bore fixed complete to walls or laid in floors including necessary all GI fittings such as bends, elbows, tees, reducer, unions etc |
| 111 | Supply & Fix gun metal gate valve 25 mm bore (ISI Marked ) with iron wheel head, screwed both ends for iron pipe for following sizes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender