Power Boards / Undertakings / PSU Closing in 10 days TDR #57275838

Tender For Development Of Garden, Path Way, Gazebo, Fountain And Gate Work At Vip Guest House Chandbadh Bhopal.

Issued by Boards / Undertakings / PSU · Bhopal, Madhya Pradesh
Tender Value
11.50 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
10 days left
EMD
23000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Development Of Garden, Path Way, Gazebo, Fountain And Gate Work At Vip Guest House Chandbadh Bhopal.

BOQ

Name of Work:- Development of Garden, Path Way, Gazebo, Fountain and Gate work at VIP Guest House Chandbadh Bhopal.
Sl. No. Item Description
1Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil
2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil
3Supplying and stacking of good earth specific useful for plantation at site including royalty if any and carriage (earth measured in stacks will be reduced by 20% for payment).
4Demolishing cement concrete manually/by mechanical means including disposal of materialwithin 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:4:8 orleaner mix (i/c equivalent design mix).
5Demolishing brick workmanually/ by mechanical meansincluding stacking of serviceablematerial… etc In cement mortar.
6Dismantling stone slab flooringlaid in cement mortar includingstacking of serviceable materialand disposal of unserviceablematerial within 50 metres lead.
7Providing and laying gang saw cut 18 mm thick,mirror polished premoulded (wherever required)and pre polished machine cut granite stonework… etc Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White orequivalent with self design/ pattern/crystals ofother colors of glitter
8Granite work gang saw cut (polished and machinecut) of thickness 18mm for wall lining (veneerwork), backing filled with a grout of average 12mm thick in cement mortar… etc Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ Whiteor equivalent with self design/ pattern/crystals ofother colors of glitter
9Providing and laying factory made chamfered edgeCement Concrete paver blocks in footpath, parks,lawns, drive ways or light traffic parking etc. of requiredcolour strength, thickness pattern, surface texture… etc 60 mm thick C.C. paver block of M-35 grade
10Providing and laying factory made chamfered edgeCement Concrete paver blocks in footpath, parks,lawns, drive ways or light traffic parking etc. of requiredcolour strength, thickness pattern, surface texture… etc 60 mm thick C.C. paver block of M-30 grade
11Uprooting weeds from the trenched area after10 to 15 days of its flooding with waterincluding disposal of uprooted vegetation.
12Supplying and stacking at site dump manurefrom approved source, including carriage(manure measured in stacks will be reduced by8% for payment) :.
13Spreading of sludge, dump manure and / or goodearth in required thickness as per direction ofEngineer-in-charge (Cost of sludge, dumpmanure and / or good earth to be paidseparately).
14Mixing earth and sludge or manure in therequired proportion specified or directed by theEngineer-in-charge.
15Grassing with Selection No.1 grass includingwatering and maintenance of the lawn for 30days or more till the grass…. Etc With grass turf
16Digging holes in ordinary soil and refilling thesame with the excavated earth mixed withmanure or sludge in the ratio of 2:1…. etc With grass turf Holes 30 cm dia and 30 cm deep.
17Providing and planting different variety ofplants of approved quality and sizes asmentioned including making pits of required sizeat site, refilled with B.C. Soil…. Etc Bahunia Tomentosa, Beloperone Species,Caselpinnia Pulcherima, Bird of Paradise,Callandra Emarginata, Callandra Hybrida,Cassia Bi flora, Cassia Laevigata, CestrumNocturnum, Dombeya Mastersii, EuphorbiaCaracasana, Euphorbia Pulcherima, Excorea bicolor, Excorea tri color, Ficuas Blackii, FicusReginold.......etc
18Providing and planting different variety ofplants of approved quality and sizes asmentioned including making pits of required sizeat site, refilled with B.C. Soil….etc Budded Roses of H.T variety and miniatureRoses.
19Providing and planting different variety ofplants of approved quality and sizes asmentioned including making pits of required sizeat site, refilled with B.C. Soil…. Etc Standard Roses H.T. Variety
20Wall painting with plasticemulsion paint of approved brandand manufacture to give an evenshade: One or more coats on oldwork.
21Repairs to plaster of thickness12mm to 20mm in patches of area2.5 sq. metres and under includingcutting the patch in proper shape,raking out joints and preparingand plastering the surface of thewalls complete including disposalof rubbish to the dumping groundwithin 50metres lead : Withcement mortar 1:4 (1 cement : 4sand).
22Removing white or colour washby scrapping and sand paperingand preparing the surface smoothincluding necessary repairs toscratches etc. complete.
23Steel work in built up M.S. tubular section(round, square or rectangular hollow tubesetc.) Hot finished welded type tubes
24Reinforcement for R.C.C. work including straightening, ..Mild steel and Medium Tensile steel bars.
25Reinforcement for R.C.C. work including straightening, ..TMT BARS
26CProviding and laying in position specifiedgrade of reinforced cement concrete(nominal / design mix with 20mm nominalsize graded stone aggregate)…. Etc M-20 Grade Concrete
27Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Foundations, footings, bases of columns, etc. for concrete upto plinth level
28Painting with synthetic enamel paint ofapproved brand and manufacture to givean even shade: Two or more coats onnew work.
29Providing and fixing precoatedgalvanised iron profile sheets (size,shape and pitch of corrugation asapproved by Engineer-in-charge) 0.50mm + 0.05 %, total coated thickness... etc…
30Providing and fixing G.I.pipes complete with G.I.fittings and clamps,including cutting andmaking good the walls etc. Internal work - Exposed onwall 40 mm dia. nominal bore
31Providing and fixing gunmetal gate valve with C.I.wheel of approved quality(screwed end) : With C.I. wheel of approvedquality (screwed end) 25 mm nominal bore
32Providing and fixing gunmetal gate valve with C.I.wheel of approved quality(screwed end) : With C.I. wheel of approvedquality (screwed end) 65 mm nominal bore
33Reinforced cement concrete work (with 20mm nominal size graded stone aggregate)in walls (any thickness), includingattached pilasters, buttresses:... etc..M-20 Grade Concrete
34Centering and shuttering in cluding strutting, propping etc. and removal of form for:... etc...Above plinth upto 3.6 m height from plinthlevel
35Welding by gas or electric plant includingtransportation of plant at site etc. complete
36Providing and laying at or near ground level factorymade kerb stone of M-25 grade cement concrete inposition to the required line, level and curvature,jointed with cement mortar 1:3 (1 cement: 3 sand),including making joints with or without grooves(thickness of joints except at sharp curve shall notto more than 5mm),........ etc
3720 mm cement plaster of mix :..1:6 (1 cement : 6 sand)
38Finishing walls by any mechanical ormanual means with water proofingcement paint of required shade:New work (Two or more coats applied @3.84 kg/10 sqm).
396 mm cement plaster of mix : 1:3 (1 cement : 3 sand)
40Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, .External Work..20 mm nominal outer dia.Pipes.
41Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, ..25 mm nominal outer dia .Pipes.
42Providing and fixing CPVCgate valve with knob ofapproved quality...25 mm nominal bore
43Providing and fixing C.P.brass long nose bib cock ofapproved quality conformingto IS standards and weighingnot less than 810 gm, 15 mmnominal bore.
44Providing and applying white cementbased putty of average thickness 1 mm,of approved brand over the plasteredwall surface to prepare the surface evenand smooth i/c………..etc
45Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work.
46Providing and fixing Glass mosaic tiles at finishedplain wall surface of size 20 mm x 20 mm x 4 mmin all colour, design, fixing in customize design asper direction of Engineer-in- Charge. The glassmosaic tiles to be fixed on the wall surface…. Etc
47Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete...With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm)
48Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2..Cement Mortar 1:6 (1 cement: 6 sand).
49Providing and laying in position cement concrete of With 20mm nominal size graded stone aggregate. M-20 – Grade concrete
50Providing and laying in position cement concrete of With 20mm nominal size graded stone aggregate. M-15 – Grade concrete
51Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth.
52Centering and shuttering including strutting, propping etc. and removal of form work for : above plinth: Retaining walls, return walls, walls(any thickness) including attached pilasters,buttresses, and string courses fillets etc.
53Transportation By Mechanical Transport including loading, unloading and stacking Earth.
54Supplying & installation of approved make requiredcapacity single phase, 50 Hz, 230V, open well submersiblepump,…… etc 0.5 HP head metre 6-20, discharge LPM 2-61, W/o Starter
55Supply of ISI marked and accepted standard of miniaturecircuit breaker (MCB) of 'C' series with short circuitindication…. Etc Single poleMCB SP 6Amp to 32Amp 10kA rating
56Point wiring (excluding metallic switch box &sheet but including switches, sockets, lampholders/ceiling roses etc) with 1.5sq. mm.PVC insulated cable FRLS with copper multistrand conductor ISI marked… etc Primary medium point
57Point wiring (excluding metallic switch box &sheet but including switches, sockets, lampholders/ceiling roses etc) with 1.5sq. mm.PVC insulated cable FRLS with copper multistrand conductor ISI marked… etc Primary long point
58Wiring for circuit wiring with PVC insulatedcable FRLS with copper multi strandconductor ISI marked in concealed rigidP.V.C. conduit (HMS) of ISI marked suitablesize etc. as required as per specification 6x2.5 Sq.mm. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57275838
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 11.50 Lakhs
LAST DATE 21-09-2026
Authority
Authority Name Madhya Pradesh Power Transmission Company Limited
Work Description Tender for Development Of Garden, Path Way, Gazebo, Fountain And Gate Work At Vip Guest House Chandbadh Bhopal.
Basic Detail
Tender No TS-75/479
Bidding Type Tender
Location
City Bhopal
State Madhya Pradesh
Key Dates
Publish Date 31 Aug 2026
Submission Date 21 Sep 2026
Open Date 23 Sep 2026
Finance
Tender Value 11.50 Lakhs
Tender Fee 1180
EMD 23000
Exemption Not Available
Document List
BOQ_641010.xls
ec418f7e-ea78-43f3-9c40-a3030b4b9c45.html
Instructions.pdf
Section1.pdf
Section2.pdf
Tendernotice_1 (14).pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Sep 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_641010.xls

html

ec418f7e-ea78-43f3-9c40-a3030b4b9c45.html

pdf

Instructions.pdf

pdf

Section1.pdf

pdf

Section2.pdf

pdf

Tendernotice_1 (14).pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders