Tender For Repairing The Plaster Of The Dilapidated Servant Room In Bungalow No. 2 Located At Mall Avenue, The Work Of Painting And Repairing The Roof Of The Servant Room, Waterproofing It And Installing Tiles And Aluminium Door In The Office Room Was Don
Tender Value
3.12 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
4 days left
EMD
31200
Bank guarantee accepted
Document Fee
770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairing The Plaster Of The Dilapidated Servant Room In Bungalow No. 2 Located At Mall Avenue, The Work Of Painting And Repairing The Roof Of The Servant Room, Waterproofing It And Installing Tiles And Aluminium Door In The Office Room Was Done.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres DAR NO-15.12.2 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DAR NO-15.56 |
| 3 | 15 mm cement plaster on rough side of single or half brick wall of mix :1:4(1 cement: 4 coarse) (dar 13.5.1) |
| 4 | Proding and fixing aluminium work for doors windows, ventilators and partitions with extruded built up standard tublar section/ appropriate Z section and other sections of approved make conferming to IS:733 and IS 1285 , fixing with dash fasteners of requried dia and size , including necessary filling up the gaps at at junction I.S at top bottom and sides with required EPDM rubber/ neoprene gasket etc alumimium section shall be smooth , rust free straight , mitred and joints machanically where requried including clear angle , aluminum snap beading for glazing / paneling C.P Brass/ stainless steel screws all complete as per architectural drawing and the direction of Engineer-in - charge (glazing, paneling , and dash fasteners to be paid for separately)::for fixed portion:: Anodised aluminium ( anodised transparent or dyed to requried shade according to IS:1868 , minimum anodic coating of grade AC-15(dar -21.1.1) |
| 5 | Providing , Fixing 4 mm thick APP SHEET IN PANNELING fixede almuniym door ,window shuter and poartion frames with cp brass /ss screw etc complete as per architectural drawings and the direction of E/I excluduing cost of snap beading AND EPDM gasket rubber |
| 6 | Providing and laying vitrufied floor tile in different sizes ( thickness to be specified by the manufacturer)with water absorption less than 0.08% and comferming to IS :15622 , of approved make in all colour and shade , laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand ) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc complete (ch-13- ref- 11.41.2) ( size of tile 600x600 mm ) |
| 7 | Cement concrete flooring 1:2:4 (1 cement :2 coase sand :4 graded stone aggregate ) finished with a floating coat of neat cement , including cement ,slurry ,but excluding the cost of nosing of steps etc complete ,40 mm thick with 20 mm nominal in size stone aggregate (40 mm thick with 20 mm nominal in size stone aggregate ) DAR NO-11.3.1 |
| 8 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sam and coarse sand @ 1.289 kg/sqm, This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured.DSR NO-22.6 |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required::In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (10.25.2) |
| 10 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² DSR No-12.1.3 |
| 11 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR NO-13.88 |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) |
| 13 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 13.41.1 |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) 13.81.1 |
| 15 | Providing wood work in frame of door , window , clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fastener of requried dia & length (hold fast lugs or dash shalle be paid for separately).second class teak wood (dar-9.1.1) |
| 16 | Provding and fixing ISI marked flush door shutters conforming to IS : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneers on both faces of shutter :30mm thick including isi marked stainless steelbutt hinges with necessary --9.21.2 |
| 17 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angels 40x40x6 mm for diagonal braces DAR NO-10.5.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender