Communications and Information Technology Government Departments Closing in 9 days TDR #57274337

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Bsnl Ed Bg Nit No 18 Providing Repairs To Ei And Fans In E19 Quarters At Wms Compound Jayanagar Bengaluru; Electrical System Or Installation; Servic

Issued by Government Departments · Bengaluru Urban, Karnataka
Tender Value
1.74 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
9 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Bsnl Ed Bg Nit No 18 Providing Repairs To Ei And Fans In E19 Quarters At Wms Compound Jayanagar Bengaluru; Electrical System Or Installation; Service Provider - Supplying And Replacing Following Piano Type Switch/ Socket/ Electronic Fan Regulators/Call Bell On The Existing Switch Box/Junction Box Including Removing The Existing Faulty Switches, Connections Etc. As Required. (Make: M/S Anchor Or Ss Make) (A) 5/6 S Switch , B) 5/6A 2Way Switch , C) 3 Pin 5/6 A Socket Outlet , D) 15/16 A Switch , E) 6 Pin 15/16 A Socket Outlet , F)100 Watt Step Type Electronic Mini Fan Regulator , G) Pvc Angle/Batten Holder , H) Call Bell , I) 3 Pin Ceiling Rose , J) 16A 3 Pin Plug Top , Supplying And Replacing Following Modular Type Switch/ Socket/ Electronic Fan Regulators/Call Bell On The Existing Switch Board/Junction Box Including Connections Etc. As Required. (Make: M/S Anchor Roma Or Ss Make) (A) 10 S Switch , B) 2 Way 10 A Switch , C) 3 Pin 6 A Socket Outlet , D) 32 A Dp Switch , E) 6 Pin 6/16 A Socket Outlet , F) 10 Bell Push , Supplying & Fixing Following Module Surface/Recess Modular Pvc/Gi Enclosure Etc Complete As Reqd. (Make Anchor Roma Or Similar Superior Make) (A) 3 Module , B) 4 Module , C) 8 Module , Supplying & Fixing Following Module Cover Plate On Existing Surface/Recess Modular Pvc/Gi Enclosure Etc Complete As Reqd. (Make Anchor Roma Or Similar Superior Make) (A) 3 Module , B) 4 Module , C) 8 Module , Fixing Of 24W 4Ft Led Batten On Surface Of Wall/Ceiling , Connection From Existing Point Etc Complete As Required , Supplying And Fixing Of Foot L Suitable For 230 Volts 50Hz Ac Supply Along With S/F 3Mm Thick (Nominal) Phenolic Laminated Sheet On The Existing Ms Enclosure Etc Complete As Reqd (M/S Anchor Woods Foot Light Led White 3M Or Similar Superior Make) , Supplying And Fixing 10W Led Type Polycarbonate Bulkhead Fitting Including Connections Etc Complete As Reqd (M/S Crompton/Philips/Havells Or Ss Make) , Supplying And Fixing Of 18W Led Type Round Surface Fitting Made Of Polycarbonate Suitable For 230 Volts 50Hz Ac Supply Etc Complete As Reqd (M/S Crompton Or Ss Make) , Supplying And Fixing Of 5W, 1 Led Mirror Light Suitable For 230 Volts 50Hz Ac Supply Etc As Reqd (M/S Crompton Or Ss Make) , Supplying And Fixing 9W Wall Mounting Led Decorative Fitting Suitable For Operation On 230V, 1Ph, 50Hz Ac Supply Including Connections Etc As Required , Replacing The Led L In Existing Street Light Fitting With 22W Led Bulb Including Dismantling The Dome, Fixing New Bulb, Cleaning The Dome, Fixing, Arranging Suitable Ladder Etc As Required (M/S Crompton Or Similar Superior Make) , Replacement And Installation Of 1200Mm Sweep Ceiling Fan Suitable For Working On 230V 50Hz Ac Supply, 1Star Rated, Including Removing Of Faulty Fan Etc As Reqd.(M/S Crompton Greaves Or Superior Make) , Replacement And Installation Of 250Mm Sweep Ventilation Fan In Washroom Suitable For 1Phase, 230Volts, 50Hz Ac Supply, & Testing Commissioning Etc As Required. (Make: Crompton/Havells Or Ss Make) , Replacement And Installation Of 150Mm Sweep Ventilation Fan In Washroom Suitable For 1Phase, 230Volts, 50Hz Ac Supply, & Testing Commissioning Etc As Required. (Make: Crompton/Havells Or Ss Make) , Replacement And Installation Of 300Mm Sweep Exhaust Fan Fan Suitable For Working On 230V 50Hz Ac Supply Including Removing The Faulty Fan, Connections From Existing Point, Testing Etc As Reqd (M/S Crompton Greaves Or Superior Make) , Replacing The Damaged Louvers Suitable For 300Mm Exhaust Fan Including Removing The Faulty Louver, Fixing Etc As Required , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit/Pvc Casing & Capping As Required. A) 3 X 1.5 Sq. Mm , B) 3 X 2.5 Sq. Mm , Supplying And Fixing Of Following Sizes Of Pvc Casing And Capping With All Accessories Etc As Reqd. (Avonplast Or Ss Make) A) 20 X 10Mm , Replacing Of Storage Type 25 Litres Capacity 5 Star Rated Vertical Geyser With Inbuilt Thermostat, Cord Wire And 3Pin Plug Suitable For Working On 230V 50Hz Supply Including Inlet And Outlet Flexible Braided Water Pipe, Testing And Connections Etc As Reqd.(M/S Racold Cdr Or Similar Superior Make) , Replacing The Existing Switch Plate With 3Mm Thick (Nominal) Phenolic Laminated Sheet Of Size About 0.28X0.20M On The Existing Enclosure For Closing Unused Openings Including Providing Necessary Hardware Etc As Required , Replacing The Existing Switch Plate With 3Mm Thick (Nominal) Phenolic Laminated Sheet Of Size About 0.28X0.13M On The Existing Enclosure For Closing Unused Openings Including Providing Necessary Hardware Etc As Required , Replacing The Existing Switch Plate With 3Mm Thick (Nominal) Phenolic Laminated Sheet Of Size About 0.13X0.13M On The Existing Enclosure For Closing Unused Openings Including Providing Necessary Hardware Etc As Required , Replacing The Existing Switch Plate With 3Mm Thick (Nominal) Phenolic Laminated Sheet Of Size About 0.18X0.13M On The Existing Enclosure For Closing Unused Openings Including Providing Necessary Hardware Etc As Required , Supplying And Fixing Single Pole 5 A To 32 A Rating, 240V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 40A Double Pole Rccb With 30Ma Sensitivity Suitable For Operation 240V, 1Ph, 50Hz Ac Supply In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 16G Ms Sheet For Existing Db/Switch Box Including Cutting To The Required Shape And Size, Drilling, Painting, Providing Necessary Hardware For Fixing Etc As Required , Supplying And Fixing Of Gi Twin Bracket Suitable For Installation Of 30W/50W Led Street Light Made Of 50Mm Dia B Class Gi Pipe For Fixing On The Existing Pole And Extension For Mounting Of 2No Led Fittings With 32Mm Dia B Class Gi Pipe Of Suitable Length On Two Sides, Providing Nut Bolts With Top Cover I/C Cutting, Welding, Painting With Similar Colour, Fixing On Existing Pole Etc As Reqd , Supplying And Fixing Of 30W High Power Led Street Light Fitting Complete With All Accessories Suitable For 230V, 50Hz, Ac Supply, Fixing On The Existing Bracket, Interconnections, Transportation, Arranging Ladder Etc., As Reqd. (M/S Crompton Greaves Lsts-30-Cdl Or Ss Make) , Supplying & Connecting Of 3 Core 1.5Sq.Mm Pvc Insulated Pvc Round Sheathed Cable For Connecting From Pole Box To Street Light Fitting Etc Complete As Reqd. (M/S Havells/Polycab Or Ss Make) , Supplying And Fixing Of Weather Proof Smc Enclosure Of Size About 200Mm X 140Mm X 95Mm Deep (Nominal) With 1No 6 C Curve Sp Mcb With Din Channel, 6Way Bakelite Connector I/C Fixing On The Existing Cl , Etc As Reqd [M/S Sintex Or Similar Approved Make] , Disconnecting & Removing The Damaged Ms Box And Burnt Cable Along With Damaged End Terminations From The Existing Street Light Poles By Cutting The Gi Pipe Without Damaging The Cable Inside, Supplying And Fixing Of Suitable Size Support Made Of 20Mm X 5Mm (Nominal) Ms Flat To Match With The Size Of New Control Box, Fixing On The Existing Street Light Pole, Providing Necessary Hardware, Welding, Painting Etc As Reqd.

BOQ

Sl. No. Item TitleItem Description
1Supplying and Replacing following Piano type switch/ socket/ electronic fan regulators/call bell on the existing switch box/junction box including removing the existing faulty switches, connections etc. as required. (Make: M/s Anchor or SS make) (a) 5/6 amps switchSupplying and Replacing following Piano type switch/ socket/ electronic fan regulators/call bell on the existing switch box/junction box including removing the existing faulty switches, connections etc. as required. (Make: M/s Anchor or SS make) (a) 5/6 amps switch
2b) 5/6A 2Way Switchb) 5/6A 2Way Switch
3c) 3 pin 5/6 A socket outletc) 3 pin 5/6 A socket outlet
4d) 15/16 A switchd) 15/16 A switch
5e) 6 pin 15/16 A socket outlete) 6 pin 15/16 A socket outlet
6f)100 Watt step type electronic Mini fan regulatorf)100 Watt step type electronic Mini fan regulator
7g) PVC Angle/Batten holderg) PVC Angle/Batten holder
8h) Call bellh) Call bell
9i) 3 Pin Ceiling rosei) 3 Pin Ceiling rose
10j) 16A 3 Pin Plug topj) 16A 3 Pin Plug top
11Supplying and Replacing following MODULAR type switch/ socket/ electronic fan regulators/call bell on the existing switch board/junction box including connections etc. as required. (Make: M/s Anchor ROMA or SS make) (a) 10 amps switchSupplying and Replacing following MODULAR type switch/ socket/ electronic fan regulators/call bell on the existing switch board/junction box including connections etc. as required. (Make: M/s Anchor ROMA or SS make) (a) 10 amps switch
12b) 2 way 10 A switchb) 2 way 10 A switch
13c) 3 pin 6 A socket outletc) 3 pin 6 A socket outlet
14d) 32 A DP switchd) 32 A DP switch
15e) 6 pin 6/16 A socket outlete) 6 pin 6/16 A socket outlet
16f) 10 Bell pushf) 10 Bell push
17Supplying & fixing following module surface/recess modular PVC/GI enclosure etc complete as reqd. (Make Anchor Roma or similar superior make) (a) 3 ModuleSupplying & fixing following module surface/recess modular PVC/GI enclosure etc complete as reqd. (Make Anchor Roma or similar superior make) (a) 3 Module
18b) 4 Moduleb) 4 Module
19c) 8 Modulec) 8 Module
20Supplying & fixing following module cover plate on existing surface/recess modular PVC/GI enclosure etc complete as reqd. (Make Anchor Roma or similar superior make) (a) 3 ModuleSupplying & fixing following module cover plate on existing surface/recess modular PVC/GI enclosure etc complete as reqd. (Make Anchor Roma or similar superior make) (a) 3 Module
21b) 4 Moduleb) 4 Module
22c) 8 Modulec) 8 Module
23Fixing of 24W 4ft LED batten on surface of wall/ceiling , connection from existing point etc complete as requiredFixing of 24W 4ft LED batten on surface of wall/ceiling , connection from existing point etc complete as required
24Supplying and Fixing of foot lamp suitable for 230 volts 50Hz AC supply along with S/F 3mm thick (nominal) phenolic laminated sheet on the existing Ms enclosure etc complete as reqd (M/s Anchor Woods Foot Light LED White 3M or similar superior make)Supplying and Fixing of foot lamp suitable for 230 volts 50Hz AC supply along with S/F 3mm thick (nominal) phenolic laminated sheet on the existing Ms enclosure etc complete as reqd (M/s Anchor Woods Foot Light LED White 3M or similar superior make)
25Supplying and fixing 10W LED type polycarbonate bulkhead fitting including connections etc complete as reqd (M/s Crompton/Philips/Havells or SS Make)Supplying and fixing 10W LED type polycarbonate bulkhead fitting including connections etc complete as reqd (M/s Crompton/Philips/Havells or SS Make)
26Supplying and Fixing of 18W LED type round surface fitting made of polycarbonate suitable for 230 volts 50Hz AC supply etc complete as reqd (M/s Crompton or SS Make)Supplying and Fixing of 18W LED type round surface fitting made of polycarbonate suitable for 230 volts 50Hz AC supply etc complete as reqd (M/s Crompton or SS Make)
27Supplying and Fixing of 5W, 1' LED mirror light suitable for 230 volts 50Hz AC supply etc as reqd (M/s Crompton or SS make)Supplying and Fixing of 5W, 1' LED mirror light suitable for 230 volts 50Hz AC supply etc as reqd (M/s Crompton or SS make)
28Supplying and fixing 9W wall mounting LED decorative fitting suitable for operation on 230V, 1Ph, 50Hz AC supply including connections etc as requiredSupplying and fixing 9W wall mounting LED decorative fitting suitable for operation on 230V, 1Ph, 50Hz AC supply including connections etc as required
29Replacing the LED lamp in existing street light fitting with 22W LED bulb including dismantling the dome, fixing new bulb, cleaning the dome, fixing, arranging suitable ladder etc as required (M/s Crompton or similar superior make)Replacing the LED lamp in existing street light fitting with 22W LED bulb including dismantling the dome, fixing new bulb, cleaning the dome, fixing, arranging suitable ladder etc as required (M/s Crompton or similar superior make)
30Replacement and installation of 1200mm sweep ceiling fan suitable for working on 230V 50Hz AC supply, 1star rated, including removing of faulty fan etc as reqd.(M/s Crompton greaves or superior Make)Replacement and installation of 1200mm sweep ceiling fan suitable for working on 230V 50Hz AC supply, 1star rated, including removing of faulty fan etc as reqd.(M/s Crompton greaves or superior Make)
31Replacement and installation of 250mm sweep ventilation fan in washroom suitable for 1Phase, 230volts, 50Hz AC supply, & testing commissioning etc as required. (Make: Crompton/Havells or SS make)Replacement and installation of 250mm sweep ventilation fan in washroom suitable for 1Phase, 230volts, 50Hz AC supply, & testing commissioning etc as required. (Make: Crompton/Havells or SS make)
32Replacement and installation of 150mm sweep ventilation fan in washroom suitable for 1Phase, 230volts, 50Hz AC supply, & testing commissioning etc as required. (Make: Crompton/Havells or SS make)Replacement and installation of 150mm sweep ventilation fan in washroom suitable for 1Phase, 230volts, 50Hz AC supply, & testing commissioning etc as required. (Make: Crompton/Havells or SS make)
33Replacement and installation of 300mm sweep exhaust fan fan suitable for working on 230V 50Hz AC supply including removing the faulty fan, connections from existing point, testing etc as reqd (M/s Crompton greaves or superior Make)Replacement and installation of 300mm sweep exhaust fan fan suitable for working on 230V 50Hz AC supply including removing the faulty fan, connections from existing point, testing etc as reqd (M/s Crompton greaves or superior Make)
34Replacing the damaged louvers suitable for 300mm exhaust fan including removing the faulty louver, fixing etc as requiredReplacing the damaged louvers suitable for 300mm exhaust fan including removing the faulty louver, fixing etc as required
35Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/PVC casing & capping as required. a) 3 x 1.5 sq. mmSupplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/PVC casing & capping as required. a) 3 x 1.5 sq. mm
36b) 3 x 2.5 sq. mmb) 3 x 2.5 sq. mm
37Supplying and fixing of following sizes of PVC casing and capping with all accessories etc as reqd. (Avonplast or SS Make) a) 20 x 10mmSupplying and fixing of following sizes of PVC casing and capping with all accessories etc as reqd. (Avonplast or SS Make) a) 20 x 10mm
38Replacing of storage type 25 litres capacity 5 star rated Vertical Geyser with inbuilt thermostat, cord wire and 3pin plug suitable for working on 230V 50Hz supply including inlet and outlet flexible braided water pipe, testing and connections etc as reqd.(M/s Racold CDR or similar superior make)Replacing of storage type 25 litres capacity 5 star rated Vertical Geyser with inbuilt thermostat, cord wire and 3pin plug suitable for working on 230V 50Hz supply including inlet and outlet flexible braided water pipe, testing and connections etc as reqd.(M/s Racold CDR or similar superior make)
39Replacing the existing switch plate with 3mm thick (nominal) phenolic laminated sheet of size about 0.28x0.20m on the existing enclosure for closing unused openings including providing necessary hardware etc as requiredReplacing the existing switch plate with 3mm thick (nominal) phenolic laminated sheet of size about 0.28x0.20m on the existing enclosure for closing unused openings including providing necessary hardware etc as required
40Replacing the existing switch plate with 3mm thick (nominal) phenolic laminated sheet of size about 0.28x0.13m on the existing enclosure for closing unused openings including providing necessary hardware etc as requiredReplacing the existing switch plate with 3mm thick (nominal) phenolic laminated sheet of size about 0.28x0.13m on the existing enclosure for closing unused openings including providing necessary hardware etc as required
41Replacing the existing switch plate with 3mm thick (nominal) phenolic laminated sheet of size about 0.13x0.13m on the existing enclosure for closing unused openings including providing necessary hardware etc as requiredReplacing the existing switch plate with 3mm thick (nominal) phenolic laminated sheet of size about 0.13x0.13m on the existing enclosure for closing unused openings including providing necessary hardware etc as required
42Replacing the existing switch plate with 3mm thick (nominal) phenolic laminated sheet of size about 0.18x0.13m on the existing enclosure for closing unused openings including providing necessary hardware etc as requiredReplacing the existing switch plate with 3mm thick (nominal) phenolic laminated sheet of size about 0.18x0.13m on the existing enclosure for closing unused openings including providing necessary hardware etc as required
43Supplying and fixing SINGLE POLE 5 A to 32 A rating, 240V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.Supplying and fixing SINGLE POLE 5 A to 32 A rating, 240V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.
44Supplying and fixing 40A DOUBLE POLE RCCB with 30mA Sensitivity suitable for operation 240V, 1Ph, 50Hz AC supply in the existing MCB DB complete with connections, testing and commissioning etc. as required.Supplying and fixing 40A DOUBLE POLE RCCB with 30mA Sensitivity suitable for operation 240V, 1Ph, 50Hz AC supply in the existing MCB DB complete with connections, testing and commissioning etc. as required.
45Supplying and fixing 16G MS Sheet for existing DB/Switch box including cutting to the required shape and size, drilling, painting, providing necessary hardware for fixing etc as requiredSupplying and fixing 16G MS Sheet for existing DB/Switch box including cutting to the required shape and size, drilling, painting, providing necessary hardware for fixing etc as required
46Supplying and fixing of GI Twin bracket suitable for installation of 30W/50W LED Street light made of 50mm dia B Class GI pipe for fixing on the existing pole and extension for mounting of 2no LED fittings with 32mm dia 'B' class GI Pipe of suitable length on two sides, providing nut bolts with top cover i/c cutting, welding, painting with similar colour, fixing on existing pole etc as reqdSupplying and fixing of GI Twin bracket suitable for installation of 30W/50W LED Street light made of 50mm dia B Class GI pipe for fixing on the existing pole and extension for mounting of 2no LED fittings with 32mm dia 'B' class GI Pipe of suitable length on two sides, providing nut bolts with top cover i/c cutting, welding, painting with similar colour, fixing on existing pole etc as reqd
47Supplying and Fixing of 30W high power LED street light fitting complete with all accessories suitable for 230V, 50Hz, AC supply, fixing on the existing bracket, interconnections, transportation, arranging ladder etc., as reqd. (M/s Crompton Greaves LSTS-30-CDL or SS make)Supplying and Fixing of 30W high power LED street light fitting complete with all accessories suitable for 230V, 50Hz, AC supply, fixing on the existing bracket, interconnections, transportation, arranging ladder etc., as reqd. (M/s Crompton Greaves LSTS-30-CDL or SS make)
48Supplying & connecting of 3 core 1.5sq.mm PVC insulated PVC round sheathed cable for connecting from pole box to street light fitting etc complete as reqd. (M/s Havells/Polycab or SS Make)Supplying & connecting of 3 core 1.5sq.mm PVC insulated PVC round sheathed cable for connecting from pole box to street light fitting etc complete as reqd. (M/s Havells/Polycab or SS Make)
49Supplying and Fixing of weather proof SMC enclosure of size about 200mm x 140mm x 95mm deep (nominal) with 1No 6Amp C curve SP MCB with din channel, 6way bakelite connector i/c fixing on the existing clamp, etc as reqd [M/s Sintex or similar approved make]Supplying and Fixing of weather proof SMC enclosure of size about 200mm x 140mm x 95mm deep (nominal) with 1No 6Amp C curve SP MCB with din channel, 6way bakelite connector i/c fixing on the existing clamp, etc as reqd [M/s Sintex or similar approved make]
50Disconnecting & removing the damaged MS Box and burnt cable along with damaged end terminations from the existing street light poles by cutting the GI pipe without damaging the cable inside, Supplying and fixing of suitable size support made of 20mm x 5mm (nominal) MS flat to match with the size of new control box, fixing on the existing street light pole, providing necessary hardware, welding, painting etc as reqd.Disconnecting & removing the damaged MS Box and burnt cable along with damaged end terminations from the existing street light poles by cutting the GI pipe without damaging the cable inside, Supplying and fixing of suitable size support made of 20mm x 5mm (nominal) MS flat to match with the size of new control box, fixing on the existing street light pole, providing necessary hardware, welding, painting etc as reqd.

AI Tender Summary

OUR REF NO 57274337
AUTHORITY Government Departments
TENDER VALUE 1.74 Lakhs
LAST DATE 11-09-2026
Authority
Authority Name Department Of Telecommunications
Work Description Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Bsnl Ed Bg Nit No 18 Providing Repairs To Ei And Fans In E19 Quarters At Wms Compound Jayanagar Bengaluru; Electrical System Or Installation; Service Provider - Supplying And Replacing Following Piano Type Switch/ Socket/ Electronic Fan Regulators/Call Bell On The Existing Switch Box/Junction Box Including Removing The Existing Faulty Switches, Connections Etc. As Required. (Make: M/S Anchor Or Ss Make) (A) 5/6 S Switch , B) 5/6A 2Way Switch , C) 3 Pin 5/6 A Socket Outlet , D) 15/16 A Switch , E) 6 Pin 15/16 A Socket Outlet , F)100 Watt Step Type Electronic Mini Fan Regulator , G) Pvc Angle/Batten Holder , H) Call Bell , I) 3 Pin Ceiling Rose , J) 16A 3 Pin Plug Top , Supplying And Replacing Following Modular Type Switch/ Socket/ Electronic Fan Regulators/Call Bell On The Existing Switch Board/Junction Box Including Connections Etc. As Required. (Make: M/S Anchor Roma Or Ss Make) (A) 10 S Switch , B) 2 Way 10 A Switch , C) 3 Pin 6 A Socket Outlet , D) 32 A Dp Switch , E) 6 Pin 6/16 A Socket Outlet , F) 10 Bell Push , Supplying & Fixing Following Module Surface/Recess Modular Pvc/Gi Enclosure Etc Complete As Reqd. (Make Anchor Roma Or Similar Superior Make) (A) 3 Module , B) 4 Module , C) 8 Module , Supplying & Fixing Following Module Cover Plate On Existing Surface/Recess Modular Pvc/Gi Enclosure Etc Complete As Reqd. (Make Anchor Roma Or Similar Superior Make) (A) 3 Module , B) 4 Module , C) 8 Module , Fixing Of 24W 4Ft Led Batten On Surface Of Wall/Ceiling , Connection From Existing Point Etc Complete As Required , Supplying And Fixing Of Foot L Suitable For 230 Volts 50Hz Ac Supply Along With S/F 3Mm Thick (Nominal) Phenolic Laminated Sheet On The Existing Ms Enclosure Etc Complete As Reqd (M/S Anchor Woods Foot Light Led White 3M Or Similar Superior Make) , Supplying And Fixing 10W Led Type Polycarbonate Bulkhead Fitting Including Connections Etc Complete As Reqd (M/S Crompton/Philips/Havells Or Ss Make) , Supplying And Fixing Of 18W Led Type Round Surface Fitting Made Of Polycarbonate Suitable For 230 Volts 50Hz Ac Supply Etc Complete As Reqd (M/S Crompton Or Ss Make) , Supplying And Fixing Of 5W, 1 Led Mirror Light Suitable For 230 Volts 50Hz Ac Supply Etc As Reqd (M/S Crompton Or Ss Make) , Supplying And Fixing 9W Wall Mounting Led Decorative Fitting Suitable For Operation On 230V, 1Ph, 50Hz Ac Supply Including Connections Etc As Required , Replacing The Led L In Existing Street Light Fitting With 22W Led Bulb Including Dismantling The Dome, Fixing New Bulb, Cleaning The Dome, Fixing, Arranging Suitable Ladder Etc As Required (M/S Crompton Or Similar Superior Make) , Replacement And Installation Of 1200Mm Sweep Ceiling Fan Suitable For Working On 230V 50Hz Ac Supply, 1Star Rated, Including Removing Of Faulty Fan Etc As Reqd.(M/S Crompton Greaves Or Superior Make) , Replacement And Installation Of 250Mm Sweep Ventilation Fan In Washroom Suitable For 1Phase, 230Volts, 50Hz Ac Supply, & Testing Commissioning Etc As Required. (Make: Crompton/Havells Or Ss Make) , Replacement And Installation Of 150Mm Sweep Ventilation Fan In Washroom Suitable For 1Phase, 230Volts, 50Hz Ac Supply, & Testing Commissioning Etc As Required. (Make: Crompton/Havells Or Ss Make) , Replacement And Installation Of 300Mm Sweep Exhaust Fan Fan Suitable For Working On 230V 50Hz Ac Supply Including Removing The Faulty Fan, Connections From Existing Point, Testing Etc As Reqd (M/S Crompton Greaves Or Superior Make) , Replacing The Damaged Louvers Suitable For 300Mm Exhaust Fan Including Removing The Faulty Louver, Fixing Etc As Required , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit/Pvc Casing & Capping As Required. A) 3 X 1.5 Sq. Mm , B) 3 X 2.5 Sq. Mm , Supplying And Fixing Of Following Sizes Of Pvc Casing And Capping With All Accessories Etc As Reqd. (Avonplast Or Ss Make) A) 20 X 10Mm , Replacing Of Storage Type 25 Litres Capacity 5 Star Rated Vertical Geyser With Inbuilt Thermostat, Cord Wire And 3Pin Plug Suitable For Working On 230V 50Hz Supply Including Inlet And Outlet Flexible Braided Water Pipe, Testing And Connections Etc As Reqd.(M/S Racold Cdr Or Similar Superior Make) , Replacing The Existing Switch Plate With 3Mm Thick (Nominal) Phenolic Laminated Sheet Of Size About 0.28X0.20M On The Existing Enclosure For Closing Unused Openings Including Providing Necessary Hardware Etc As Required , Replacing The Existing Switch Plate With 3Mm Thick (Nominal) Phenolic Laminated Sheet Of Size About 0.28X0.13M On The Existing Enclosure For Closing Unused Openings Including Providing Necessary Hardware Etc As Required , Replacing The Existing Switch Plate With 3Mm Thick (Nominal) Phenolic Laminated Sheet Of Size About 0.13X0.13M On The Existing Enclosure For Closing Unused Openings Including Providing Necessary Hardware Etc As Required , Replacing The Existing Switch Plate With 3Mm Thick (Nominal) Phenolic Laminated Sheet Of Size About 0.18X0.13M On The Existing Enclosure For Closing Unused Openings Including Providing Necessary Hardware Etc As Required , Supplying And Fixing Single Pole 5 A To 32 A Rating, 240V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 40A Double Pole Rccb With 30Ma Sensitivity Suitable For Operation 240V, 1Ph, 50Hz Ac Supply In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 16G Ms Sheet For Existing Db/Switch Box Including Cutting To The Required Shape And Size, Drilling, Painting, Providing Necessary Hardware For Fixing Etc As Required , Supplying And Fixing Of Gi Twin Bracket Suitable For Installation Of 30W/50W Led Street Light Made Of 50Mm Dia B Class Gi Pipe For Fixing On The Existing Pole And Extension For Mounting Of 2No Led Fittings With 32Mm Dia B Class Gi Pipe Of Suitable Length On Two Sides, Providing Nut Bolts With Top Cover I/C Cutting, Welding, Painting With Similar Colour, Fixing On Existing Pole Etc As Reqd , Supplying And Fixing Of 30W High Power Led Street Light Fitting Complete With All Accessories Suitable For 230V, 50Hz, Ac Supply, Fixing On The Existing Bracket, Interconnections, Transportation, Arranging Ladder Etc., As Reqd. (M/S Crompton Greaves Lsts-30-Cdl Or Ss Make) , Supplying & Connecting Of 3 Core 1.5Sq.Mm Pvc Insulated Pvc Round Sheathed Cable For Connecting From Pole Box To Street Light Fitting Etc Complete As Reqd. (M/S Havells/Polycab Or Ss Make) , Supplying And Fixing Of Weather Proof Smc Enclosure Of Size About 200Mm X 140Mm X 95Mm Deep (Nominal) With 1No 6 C Curve Sp Mcb With Din Channel, 6Way Bakelite Connector I/C Fixing On The Existing Cl , Etc As Reqd [M/S Sintex Or Similar Approved Make] , Disconnecting & Removing The Damaged Ms Box And Burnt Cable Along With Damaged End Terminations From The Existing Street Light Poles By Cutting The Gi Pipe Without Damaging The Cable Inside, Supplying And Fixing Of Suitable Size Support Made Of 20Mm X 5Mm (Nominal) Ms Flat To Match With The Size Of New Control Box, Fixing On The Existing Street Light Pole, Providing Necessary Hardware, Welding, Painting Etc As Reqd.
Basic Detail
Tender No GEM/2026/B/7978187
Bidding Type Tender
Location
City Bengaluru Urban
State Karnataka
Key Dates
Publish Date 31 Aug 2026
Submission Date 11 Sep 2026
Open Date 11 Sep 2026
Finance
Tender Value 1.74 Lakhs
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
2319c57a-55d2-405d-9500-4b808ed8494e.pdf
1788168637.xlsx
1788168652.pdf
1788168656.pdf
ATC_bea53f5c-a89d-4717-a7881788168910659_EEEBGBA.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Sep 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
pdf

2319c57a-55d2-405d-9500-4b808ed8494e.pdf

xlsx

1788168637.xlsx

pdf

1788168652.pdf

pdf

1788168656.pdf

pdf

ATC_bea53f5c-a89d-4717-a7881788168910659_EEEBGBA.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders