Tender For Special Repair To Building No P-7 Of 429 Coy Asc (Sup) Type ‘A Madgaon (Goa)
Tender Value
27.42 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
55000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-7 Of 429 Coy Asc (Sup) Type ‘A Madgaon (Goa)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings |
| 2 | M & L for complete removal of existing paint from old steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. |
| 3 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 4 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for → → |
| 6 | Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. |
| 7 | Demolition of brickwork or stone/boulder masonry, built in CM including all quoins arches pillars etc. |
| 8 | Material and labour for laterite stone walling of squared rubble, regular coursed well bounded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed |
| 9 | M&L for 15 mm thick cement mortar 1:6 on Brick or concrete surface finished even and smooth without using extra cement all as specified |
| 10 | M&L 15mm thick plastering on fair faces of bricks or concret surfaces finished even and smooth w/o using extra cement in cm1:4 |
| 11 | M&L for two coat of oil bound distemper over one coat primer on wall over new plastered surfaces including prepartion of new surfaces on plastered surfaces, prepara-tory to distempering complete all as specified and directed |
| 12 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 13 | Supply only integral waterproofing compound |
| 14 | M&L for preparation on old plaster surface and complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over 3mm thick waterproof putty and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces |
| 15 | M&L for preperation of old decorated surface of wall washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper making good with putty filling wherever reqd etc complete all as specified and directed |
| 16 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame ) area n exc 1.5 sqm each. |
| 17 | Taking down chowkat with shutter(without taking off shutter from the frame) area exc 1.5 sqm but n exc 4 sqm each |
| 18 | S&F for Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS 1856 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles apparature of diamond shape grills of 75mm and fixing approved powder coated aluminium standard section around the opening all complete as per requirement and direction of engr-in-charge. |
| 19 | S & F for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 20 | S & F Power coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 21 | S&F for Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS 1856 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles apparature of diamond shape grills of 75mm and fixing approved powder coated aluminium standard section around the opening all complete as per requirement and direction of engr-in-charge. |
| 22 | S&F sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm each pane 4mm thick. |
| 23 | S&F Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed. |
| 24 | S & F 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints. |
| 25 | S&F for factory made Plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated IInd class H.W rail and style.incl hold fast 25X6mm |
| 26 | M&L 35mm thick 2nd class H.W Glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified in SSR Part I section clause 8.20(a) supplied and fitted to chowkats. |
| 27 | Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg. |
| 28 | Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PCV 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drawing. |
| 29 | S&F for Door closer hydraulically regulated,designation No, 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed (aluminium) |
| 30 | S&F for Floor door stopper of aiuminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor |
| 31 | M&L Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer. |
| 32 | S&F for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long. |
| 33 | S & F Butt hinges, medium weight cold rolled mild steel and fixed 100mm long. |
| 34 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long. |
| 35 | S & F Aluminium handles cast type anodised 150 mm long.. |
| 36 | M&L for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. Half brick but not exc one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed |
| 37 | S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed |
| 38 | S&F for Hand rails, half round or other steel section or core for wooden drilled and countersunk forbalusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 → |
| 39 | M & L for new steel surface of any description over 10 cm width or grith and applying two coats of anticorrosive synthetic enamel paint over a coat of red oxide complete all as specified. |
| 40 | S & F 4 mm thick figured glass/ pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises as specified and directed by Engr -in- Charge |
| 42 | Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced). |
| 43 | M & L Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) 75mm thick as in sub base. |
| 44 | M&L cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25mm thick as in flooring etc. |
| 45 | M & L PCC 1:3:6 type C-2, 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement. |
| 46 | M&Lfor non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, jointed in neat cement slurry and pointed in white cement or coloured cement to match etc including 15mm thick screed bed in CM 1:6. |
| 47 | M&L for non-skid ceramic coloured tiles 400x400mmx7mm thick in floors etc set jointed in neat cement slurry and pointed in white cement or coloured cement to match etc including 20mm thick screed bed in CM 1:6. |
| 48 | M&L for glazed ceramic coloured tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 |
| 49 | M&L for Machine cut kota stone slab flooring 20-25mm thick including 15mm thick screed bed in CM 1:6.over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl Mirror polishing on Kota stone/ stone work where ever required to give high gloss finish incl rubbing and mirror polishing complete etc |
| 50 | M&L for Machine cut kota slab 20-25mm thick in risers of step skirting dado over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Mirror polishing Kota stone/ stone work where ever required to give high gloss finish rubbing and mirror polishing including 10mm thick rendering with CM 1:4 and fair faces on brick work or concrete surfaces. |
| 51 | S&F in repair fancy type curtain rod 25mm dia with heavy duty brackets, both of SS 304 grade including end brackets,J/L type support stops, rollers etc |
| 52 | Dismantling of ceiling boards any thickness including cover fillets. |
| 53 | Supply and fix for false ceiling work of aluminium anodised snap grid frame work, size of grid 605 X 605mm , 6mm thick Everest designer boards or equivelent fixed Aluminium frame work with screws, including hangers 6mm dia, G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 X 3mm size 60mm long as in ceilings complete all as specified. |
| 54 | S&F for steel rolling shutters, (thickness of laths 1.25mm)with out ball bearing, but gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type |
| 55 | S&F for Safety lever locks mild steel with 4 levers for rolling shutters → |
| 56 | S&f for Ball bearing for rolling shutters as reqd all as specified and directed |
| 57 | S&F for in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete |
| 58 | S & F in repair PVC valveless, syphonic action type flush tank in repair, white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia for low lewel cistern, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm, 15mm CP angle stop valve fancy type etc complete all as directed |
| 59 | Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore . |
| 60 | Supplying and laying of 15mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 61 | Supply only in CPVC 16mm Brass Elbow (3/4 x 1/2) |
| 62 | Supply only in CPVC 16mm Brass Tee |
| 63 | Supply only in CPVC 16mm Male Brass Threaded Adaptor (MTA/ MBTA) |
| 64 | Supply only in CPVC 16mm Female Brass Threaded Adaptor (FTA/ FBTA) |
| 65 | Dismantling water tanks and removing to store capacity exc 500 Ltr n.exc 1000 Ltr |
| 66 | S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR PT I capacity of tank 1000 ltr including Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends & ball brass valves 20mm dia, high pressure, with polythene float and fly nut complete. |
| 67 | S & F PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement |
| 68 | S & F in repairs Fancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed bore of pipe 15 mm. |
| 69 | S&F 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building baord or comercial plywood and fixed to wooden plugs with chromium plated brass screws and cup waste washer. |
| 70 | S & F in repair Towel rail 'D' type 60 cm long brass chromium plated 20mm dia with brackets fixed to walls. |
| 71 | S & F wash hand basin in repair, white flat back size 550 x 400mm including 32mm brass chromium plated waste fittings, brackets, pillar tap swan neck 15mm, PVC connection 15mm size with PTMT nuts of length 450mm including cutting for and pinning in ends of brackets for erecting stand etc.including PVC waste pipe etc complete all as specified and directed. |
| 72 | Demolition of reinforced cement concrete of lintels, beams ,column,slab similar item |
| 73 | M & L for providing RCC 1:2:4, type B0 using 12.5 mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, parapets and railing upto 60 cm in height, copings, kerbs, water troughs including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-Charge. |
| 74 | M & L for 10mm dia and over TMT steel cut to length, bend to shape and binding with ms wire (annealed) of dia not less than 0.9 mm. |
| 75 | M & L for 5mm dia and over upto and incl 10 mm dia in stirrrups, spacers and binders TMT steel cut to length, bend to shape and binding with ms wire (annealed) of dia not less than 0.9 mm. |
| 76 | Demolition and breaking up drain pipes 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar |
| 77 | M & L for concrete bed in PCC 1:3:6 type C2 ( using 40 mm graded stone aggregate) to drain pipes 150mm including packing under haunching against the side of pipe after laying & teting for the following dia pipes. |
| 78 | Supply and Laying for SN8 HDPE (DWC) pipes of 200mm bore internal dia, laid and jointed floor complete with elastomeric ring and coupler, and including testing all as specified and directed. Note- 1. Sewage line shall be laid down after cleaning of mud/sludge/muck/human excreta in foul conditions(through mechanical means), getting out and removing sludge to a dis exec 250m and n.exec 500m where directed in and including borrow pits and covering the borrow pits with 10cms layer of soil complete.2. The blocking cleaning and unblocking of existing manholes for laying of pipes shall be included in this item and shall not be paid separately. |
| 79 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 80 | M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC FRLS conduit (medium grade) Concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) incl Sunken Iron Boxes / pressed steel modular terminal boxes any size/module, concealed on walls and fixed by means of brass screws incl modular cover plates and cover frame any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories incl making good of wall surface by cementing / plastering, applying wall putty incl 02 coats of distempering in disturbed surface with existing colour all as specified and directed complete all as specified and directed at site for the following:- .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision) |
| 81 | One light point / Fan point ,Bell point controlled by one, one-way switch, |
| 82 | One switch socket outlet 3 pin 5 Amps, on Same board |
| 83 | One switch socket outlet 2/3 pin 5 Amps, on Independent board. |
| 84 | All as per item No 80.3 above but with 2.5 sqmm PVC insulated FRLS, multistranded copper conductor cable 1100 V grade and 2.5 Sqmm PVC insulated FRLS multistranded copper conductor cable 1100 V grade for one 3 pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed. |
| 85 | Supply and fixing including connection of modular switch one way 6 Amps 1 Module complete all as specified and directed. |
| 86 | Supply & fixing including connection of modular Switch socket combination 2 in 1, 6 pin 16 amps 3 modules complete all as specified and directed. |
| 87 | Supply & fixing including connection of modular Switch socket combination 2 in 1, 5 pin 5 amps 3 modules complete all as specified and directed. |
| 88 | S&F Ceiling rose surface bakelite 65x50mm two to three terminal complete all as specified and directed. |
| 89 | Supply and fixing of Modular Fan regulator,120 watts as directed and specified by Engineer-in-charge. |
| 90 | Supply and fixing High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with efficiency of 120 lm/W, decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. |
| 91 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 92 | S&F LED Building security light fitting 35 Watt, new generation, energy saving and environmental friendly, long life LED street light made up of pressure die-cast housing with prisma as tic polycarbonate modular secondary lense optic for city road lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK08. 4KV inbuild surge protection of capacity LED including all accessories complete all as specified and as directed by Engr-in-charge. |
| 93 | M&L for Bracket made out of GI pipe 40 mm dia medium grade, 1.2 meter long bent to shape fixed with MS flat irom clamps made out of 40mm x 6 mm thick, nuts bolts complete all as specified and directed. |
| 94 | Taking down carefully UNSV main switch and DB's including MCBs of of any size make, type and capacity and depositing at site as directed. |
| 95 | S&F IP-42 protection distribution board, TPN 4 Way, 415 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 415V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed. |
| 96 | S&F IP-42 protection distribution board, SPN 12 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed. |
| 97 | Supply and fixing in repair sheet metal enclosure box including Plug and socket with 20 Amps MCB (SPN) with taking down old U/S existing sheetmetal enclosure. |
| 98 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and Neutral (SPN) and current carrying capacity 32 Amp complete with connection testing and commissioning all as specified and directed by Engr-in-charge. |
| 99 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole (SP) and current carrying capacity 6-32 Amp complete with connection testing and commissioning all as specified and directed by Engr-in-charge. |
| 100 | Supply and fixing for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts, breaking capacity 10 KA, 'C' curve complete with connection testing and commissioning all as specified and directed by Engr-in-charge. |
| 101 | S&F GI tubing light grade 40mm dia for protection of cable fixed in wall or laid in trenches complete including taking down old unserviceable GI tubing complete all as specified and directed. |
| 102 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to MES store and refixing the same after minor repair complete all as specified and directed.Notes:1.The rate quoted shall be deemed to include disconnecting the electrical connection, sealing the cable end, dismantling the fan blades, lowering the fan safely, and transporting the fan and blades to the designated store.2.The contractor shall ensure that all dismantled components are properly labelled and stored to avoid damage or loss.3. Nothing extra shall be payable for any tools, tackles, ladders, scaffolding, transportation, loading/unloading or incidental labour required for execution of the work.4. Any damage caused during dismantling, handling or transportation shall be made good by the contractor at his own cost. |
| 103 | All as per item No. 99 here in before but for exhaust fan 300 mm/380 mm sweep. |
| 104 | S&F PVC insulated, sheathed twin twisted stranded copper conductor flexible cable of size 1.5 Sqmm for ceiling fan as specified and directed. |
| 105 | S&F in repair of louvers shutter made of MS sheet metal 1.2mm thick for round base and 0.8mm thick for flaps confirming of mounting edges frames made of MS Flat of size 25mmx3mm including heavy duty rust proof passivated bolts, of size 50mm long 8mm.for exhaust fans up to size 380 mm sweep. |
| 106 | Taking down UNSV sub main wiring of any size make, type and capacity and depositing at site as directed. |
| 107 | M&L for submain wiring with approved colour coding as per IS with with two runs of single core PVC insulated FRLSH cable with stranded copper conductor of size 1.5 sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivery colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 1.5 Sqmm PVC insulated FRLSH, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified.Note: (a) Two runs of 1.5 Sqmm single core copper cables and One run of earth conductor cable of 1.5 Sqmm with casing capping/conduit will be measured and paid as one unit length. |
| 108 | All as per item No 104 above but for cable of size 2.5 sqmm |
| 109 | All as per item No 104 above but for cable of size 4.00 sqmm |
| 110 | All as per item No 104 above but for cable of size 6.00 sqmm |
| 111 | M&L for earthing in repair complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991) all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender