Tender For Civil Works For Replacement Of Flooring And Provision Of Teak Wood Framed Designer Glass Partition In Room No. 424, New Block-1, Technology Bhawan, New Delhi - 110016
Tender Value
3.94 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
7 days left
EMD
19700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil Works For Replacement Of Flooring And Provision Of Teak Wood Framed Designer Glass Partition In Room No. 424, New Block-1, Technology Bhawan, New Delhi - 110016
BOQ
| Sl. No. | Item Description |
| 1 | DISMANTLING AND DEMOLISHING WORKS |
| 2 | Dismantling and removing existing vinyl sheet flooring pasted over the existing floor, including scraping off adhesive residue, cleaning the surface and stacking within 50 metres lead, all complete as per direction of Engineer-in-Charge. |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10 mm to 25 mm. (The tiles in the extension being adhesive fixed, the rate includes scraping off adhesive residueand and leaving the base clean to receive the treatment under Part C.) |
| 4 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead - thickness above 10 mm up to 25 mm. (Covers the existing floor-laid engineered wooden boarding of main portion together with its matching skirting.) |
| 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical means, including loading, transporting and unloading the same at the Construction and Demolition waste management site notified by the authority, including weighing at plant, complete as per direction of the Officer-in-Charge. (The processing fee of C & D management at prescribed rates shall be deposited by the contractor and reimbursed by the Department on production of the original cash receipt only. Provisional item - payable on actual measurement.) |
| 6 | INTERIM MEASURE AT THE BASE OF THE GLAZING |
| 7 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/ structural non-sag elastomeric PU sealant over backer rod of approved quality, complying with ASTM C920, DIN 18540-F and ISO 11600 - up to 20 mm depth and 20 mm width. (To be executed at the base of the curtain wall glazing on the external face, between the aluminium frame and the slab. Provisional Item - to be executed on the written direction of the Engineer-in-Charge.) |
| 8 | BASE PREPARATION WORKS |
| 9 | Hacking of cement concrete flooring including cleaning the surface, all complete as per direction of Engineer-in-Charge. |
| 10 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect - SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer (Provisional item — payable on actual measurement) |
| 11 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge - 12 mm average thickness.Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2. (Provisional item — payable on actual measurement) |
| 12 | NEW ENGINEERED WOODEN FLOORING AND SKIRTING |
| 13 | Providing and fixing in position 15 mm thick engineered wooden flooring with waterproof resin-infused high density core, in planks of nominal size 1800 mm to 2200 mm in length and 180 mm to 220 mm in width, the actual size being as per the make offered and subject to approval of the Officer-in-Charge, with plank-lock system, floating and glueless, having 3 mm hardwood veneer top, multi-layer board with the grain of each layer oriented at right angles to the adjacent layer, conforming to the E1 norm for formaldehyde emission, surface pre-finished with UV hardened acrylic lacquer free from formaldehyde and solvents, of make Greenlam, Pergo, Kahrs or equivalent approved; laid over 4 mm expanded polyethylene (EPE) foam underlay of 40 kg/cum density over a 400 micron polyvinyl chloride waterproof membrane; including matching skirting and all accessories such as reducers, end profiles and stair noses; the expansion gap at the line of the glazing to be left open under a removable cover fillet and not to be sealed; all complete as per direction of the Officer-in-Charge. (Rate covers floor and skirting together, skirting being measured in sqm of developed area consistent with the convention of item 15.39 of the Schedule.) |
| 14 | TEAK WOOD FRAMED DESIGNER GLASS PARTITION |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) - Second class teak wood. (Covers the outer frame, the centre member and the plinth of the free-standing screen. The screen being free-standing, no hold fast lug or dash fastener is required and none is paid for.) |
| 16 | Providing and fixing 8 mm thick clear toughened glass panels in the teak wood frame, carrying a decorative coloured film applied to the glass with the design cut in the film as per approved shop drawing, the glass bedded on putty for wood work and secured by teak glazing beads paid for separately under item E-3, all complete as per direction of the Officer-in-Charge. |
| 17 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood - 50 x 12 mm (Glazing beads to both faces of both glass panels of the partition.) |
| 18 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time. |
| 19 | Painting with oil type wood preservative of approved brand and manufacture - New work (two or more coats). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender