Tender For Supply & Installation Of 02 Nos. High Mast At Industrial Area Deoria.
Tender Value
9.08 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
16 days left
EMD
21451
Bank guarantee accepted
Document Fee
1475
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Deoria → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply & Installation Of 02 Nos. High Mast At Industrial Area Deoria.
BOQ
| Sl. No. | Item Description |
| 1 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (c) 16 sq. mm 2 core |
| 2 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm |
| 3 | S/B of 40 mm dia x 4.5 mtr. Long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 |
| 4 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(e-ii) 40 Amp.TPN) |
| 5 | Supply and fixing of 16 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3 mm. Top dia minium 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferntial weld, with accessoies for high mast such as head frame suitable for 6 to 12 limminaries & its control gear boxes 1.5 HP power tool moter 3 point suspension system with steel wire rope 6 mm. dia double drum winch including making suitable foundation as per manufature drawing/ site requirment along with foundation bolts nuts, washer, anchor plates etc complete in all respects(With three year All Type Repair & Maintenance) as per UPPWD Sch. No.652 (Bajaj /Philips/Crompton/Wipro Make) |
| 6 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 200 watt confirming to IP 66 protection complete in all respects (With 5 Year Gaurantee). Catt. AA as per UPPWD Sch. No.1455 (Bajaj/Philips/Crompton/Wipro Make) |
| 7 | Supply and laying of 16 sqmm. 4 core, aluminium conductor PVC insulated, armoured served, sheathed cable 110 volt grade laid with brick & sand complete in all respects including all T&P men materials required for proper completion of work. as per UPPWD Sch. No.501(i)(Polycab /KEI/ Havells/ Grandley/Gloster Make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender