Tender For Renovation Of Various Quarter At Budshah Flats By Bifurcating 3 Bhk Into Two Number 1 Bhk.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
20 days left
EMD
60000
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Various Quarter At Budshah Flats By Bifurcating 3 Bhk Into Two Number 1 Bhk.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in walls laid in cement mortar thickness of tiles 10 mm to 25 mm including stacking of serviceable material and disposal of disposal of mulba/ rubbish to the dumping ground outside the munciple limits . |
| 2 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of mulba/ rubbish to the dumping ground outside the munciple limits. |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material . |
| 4 | Demolishing cement concrete manually/by mechanical means in floor , and above.1:3:6 or richer mix (i/c equivalent design mix) and di sposal of mulba/ rubbish to the dumping ground outside the munciple limits . |
| 5 | Providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses ,parapets, coping,bedblocks,anchors blocks,plainwindowsills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 (1cement: 4coarse sand) upto V floor level. |
| 7 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles (Digital Series) conforming to IS : 13753 (thickness to be specified by the manufacturer or minimum thickness 5mm), of approved make like AGL, NITCO,ORIENT, SOMANY, KAJARIA, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade upto floor V level complete |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for:Shelves (cast-in-situ) |
| 10 | Reinforcement for R.C.C. work including straightening. cutting, bending, placing in position and binding all complete.Including all carriages upto site of work.Thermo-Mechanically Treated bars. Fe 500 of Tata/sail/jindal. |
| 11 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.16mm thick Granite of any colour or shade (Area of slab over 0.5 sqm) |
| 12 | Providing and fixing Ist quality ceramic glazed floor tiles (Digital Series and Anti skid) conforming to IS : 13753 (thickness to be specified by the manufacturer or minimum thickness 5mm), of approved make like AGL, NITCO,ORIENT, SOMANY, KAJARIA, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- inCharge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade upto floor V level complete |
| 13 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid |
| 14 | PP-R PIPES AND FITTINGS ( PILSA/ VECTUS/ PRINCE THERMAX) Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 15 | PN-20 pipe, 25mm OD(SDR-7.4) INCLUDING ALL FITTINGS, ELBOWS , TEE, MALE & FEMALE ADOPTER ) |
| 16 | PPR Union 20mm |
| 17 | Providing and fixing of P.V.C Type B Pipes of make Prince . |
| 18 | 100 mm |
| 19 | 75 mm |
| 20 | Providing and fixing of P.V.C fittings Type B Pipes of make Prince . |
| 21 | Plain Bend 100 mm |
| 22 | Plain Bend 75 mm |
| 23 | Door Bend 100 mm |
| 24 | Collar 100 mm |
| 25 | Door tee 75 mm |
| 26 | Door tee 100 mm |
| 27 | Reducer 100mm to 75 mm |
| 28 | P.V.C Floor Trap 75 mm |
| 29 | Providing and laying of PVC waste pipe flexible 32mm dia. |
| 30 | Providing and fixing of PVC connection with C.P. brass unions 45 cm to 60 cm long. |
| 31 | Providing and fixing 600x450mm beveled edge mirror of specified brand mounted on 6mm thick plywood/hardboard including cost of wooden/PVC plugs and CP brass screws. |
| 32 | Providing and fixing of Cromium plated sanitary fittings of approved make (Jaguar/ Cera / Parko or Equivalent as approved by Engineer Incharge. |
| 33 | Providing and fixing C.P brass bib cock 15mm bore (Jaguar). |
| 34 | Provising & fixing BASIN MIXER of approved brand and make incl all fittings , containing double nob complete job. (Jaguar /CERA/HINDWARE) |
| 35 | Provising & fixing wall mixer of approved brand and make incl all fittings , containing double nob complete job. (Jaguar /CERA/HINDWARE) |
| 36 | Provising & fixing sink mixer of approved brand and make incl all fittings , containing double nob complete job. (Jaguar /CERA/HINDWARE) |
| 37 | Providing and fixing C.P. brass angle valve (Jaguar /CERA/HINDWARE) |
| 38 | Soap Case |
| 39 | Providing and fixing PTMT grating of approved quality and colour.Circular type 19.49.1.1 100 mm nominal dia |
| 40 | Towel Rail Singlr 600 mm long |
| 41 | Towel ring 20 mm dia |
| 42 | Renewing glass panes with new wooden fillets Float glass panes of thickness 3.5 mm (weight not less than10kg/sqm) including scaffolding , ladders including cleaning of glass panes where ever required. complete job. |
| 43 | Painting with synthetic enamel paint of approved brand( Asian paints ) and make one or more coats on old work to give an even shade including scrapping and sandpapering , brushes or and preparing the surface even and smooth incl necessary repairs to scratches, applying putty oven and in joints also including , scaffolding , ladders including cleaning of glass panes , tiles , marble where ever required. complete. job |
| 44 | Removing dry or oil bound washable distemper, water proofing cement paint and the like by scrapping and sandpapering , brushes and compressor and preparing the surface even and smooth incl necessary repairs to scratches etc comp. (13.100.0)Including Scaffolding , Ladders all Complete |
| 45 | Providing and applying white cement based putty of averagethickness 2 mm thick mm, of of make Asian Paints or equivalent as approved by Engineer Incharge ,over the plastered wall surface to prepare the surface even and smooth complete.13.88.1 |
| 46 | Distempering with oil bound washable distemper of approved brand and make(one or more coats) and of required shade on old work to give an even shade,of make Asian Paints as approved by Engineer Incharge including scaffolding , ladders including cleaning of glass panes , tile work , marble etc ,where ever required. complete job |
| 47 | Providing , fabrication and fixing of Kitchen Cabnits of approved quality 19 mm in sides shelves two or more in each individual cabnits and where ever required including 6 mm ply wood and back plywood shuters 19 mm thick laminated sunmaica sheeting or teak wood mirror polishedd including glazing of approved quality and colour exposed face of approves design and drawing ,including painting two or more coats of synthetic enemel paint of approved quality and colour inside , including cost of all brass fastening and fittings ad telescopic drawer channels as per requirements and locks of Godrej/ link make 15 mm dia including all other necessary accessories complete in all respects , as directed by Engineer Incharge ( For payments front face to be measured ) |
| 48 | 600mm deep |
| 49 | 450mm deep |
| 50 | 300mm deep |
| 51 | Engagment of Tata Mobile for disposal of dismantled material out of the Munciple Limts. |
| 52 | Providing and fixing of imported wooden panelling (12mm thick) lining on walls ,cielings tongued and grooved planks including cost of ground work / jams / runners of K.D or Budloo Jams / runners 2 \\" x 1.5\\" @ 600mmX600 mm centre to centre hortizontally and vertically fixing with rawal plugs and screws and cover mouldings but including cost of nails, screws and cover mouldings and scafolding etc. including cost of two coats of touchwood and 50mm wide wooden cornice etc. complete (12mm thick) |
| 53 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets, 25 mm dia ( heavy type) |
| 54 | Engagment of Carpentars and helpers for easing of doors / windows and other carpentary works. |
| 55 | Carpentar |
| 56 | Helper |
| 57 | Providing and laying stone soling (Hand packed) in trenches incl.ramming, dressing ,watering etc. incl. all leads, lifts and carriage upto site of work complete. |
| 58 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.With Galvanized M.S. Wire gauge with wire of dia 0.63 mm.Including cost of beading, including Appling synthetic enamel paint( MINT GREEN / BLUE ) on both sides.As Directed by engineer inchargre. |
| 59 | Providing and fixing glazed shutters 35 mm thick for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw with ALL FITTINGS AND FASTNINGS LIKE HANDLE, TOWER BOLT , HOOK & EYE 100 mm etc . Including two or more coats of synthetic enamel paint with one of coat of wood primer, K.D Wood or Second Class Kail . As per the direction of Engineer Incharge.. |
| 60 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length(hold fast lugs or with dash fasteners shall be paid for separately).KD Wood |
| 61 | Providing and fixing 35 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick decorative Nova pan Particle board both sides laminated as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) First. Class K.D/Silver wood Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender