Tender For Face Lifting Of Xen Office Dd Office And Allied Works.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
21 days left
EMD
30000
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Face Lifting Of Xen Office Dd Office And Allied Works.
BOQ
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 3 | Painting with weather shield (Apex/Excel) two or more coats 7 to 8 sqm/Lit. incl. cleaning the surface, scrapping etc complete as approved by EIC |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 5 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats |
| 6 | Providing High Rib Profiled sheet of green colour roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diamater with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram /m2 |
| 7 | Providing and Laying of 25 mm thick devri stone tile cladding in cement motar 1:4 including pointing and carriage of material as per Engineer in Charge. |
| 8 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 9 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 10 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood |
| 11 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood |
| 12 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 13 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 14 | Providing and fixing of Kitchen cabinets / Amirah made of 19 mm thick (BWR)ply wood in sides, shelves and front shutters and back with 6mm thick (BWR) ply wood including lining of front shutters with sun-mica or teak wood mirror polished as per approved drawings icluding one coat of primer and painting two or more coats of synthetic enamel paint of approved quality and color inside including all Brass hardware fittings,glazing and drawer telescopic channels etc. wherever 1.00 sqm 8000.00 INR Eight Thousand Only required & locking arrangements (As per the directions of EIC) all inclusive complete job.(Face area of the cabinet will be measured for payment) including all carriages:-450mm |
| 15 | Providing and fixing of imported PVC panelling of approved make and pattern including base work of GI channels with necessary screw and cornice at the edge with all the carriage complete as per the direction of EIC at site |
| 16 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.:-For thickness of tiles10 mmto25 mm. |
| 17 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge:-1:3:6 or richer mix (i/c equivalent design mix) |
| 18 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 19 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering.All work upto plinth level with: 1:2:4 (1cement :2coarsesand: 4gradedstone aggregate 20mm nominal size) |
| 20 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600mm |
| 21 | Providing & fixing White vitreous china water closet squattingvpan(Indian type) along with “S” or “P” trap including dismantlingvof old WC seat and “S” or “P” trap at site complete with allvoperations including all necessary materials, labour and disposal ofvdismantled material i/c malba, all complete as per the direction |
| 22 | Providing and fixing P.V.C low level flushing citern with manually controlled device ( handle lever ) conforming to IS : 7273, with all fittings and fixtures complete: 10 litre capacity - White. |
| 23 | Providing and Laying of 110 mm dia PVC SWR (Type B) socketed pipe with rubber ring joints as per IS 13592 including all fittings and fixtures complete as directed by Engineer in Charge. |
| 24 | Providing and Laying of 75 mm dia PVC SWR (Type B) socketed pipe with rubber ring joints as per IS 13592 including all fittings and fixtures complete as directed by Engineer in Charge. |
| 25 | Providing, fabricating and fixing illuminated 3D signage/logo lettering of approved design, font, size and colour, comprising machine-cut/acrylic or equivalent approved face with fabricated side returns, complete with internal high-brightness energy-efficient LED illumination, suitable LED modules/strips, drivers/SMPS, internal wiring, connectors and accessories; letters/logo securely fixed on existing ACP/metal/masonry façade using concealed MS/GI/SS framework, studs, fasteners, spacers and approved fixing arrangement, including cutting, drilling, fabrication, electrical connections, insulation, weatherproofing/sealing, testing and commissioning, complete in all respects as per approved shop drawing, manufacturer's specifications and direction of Engineer-in-Charge. Measurement shall be based on the overall rectangular area occupied by the signage/logo. |
| 26 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1:cement: 3 coarse snad:6 graded stone aggregated 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 27 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by crisscrossing GI wire.With resin bonded rock wool with density 48 kg/cum |
| 28 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position: Budloo / Fir wood. |
| 29 | Providing and fixing of plywood in walls, ceiling or like of approved brand and manufacture with all necessary fittings and fixtures, scoldings all complete as specified including all carriages complete as directed by Engineer in Charge. 12 mm thick |
| 30 | Finishing of external facade with specified pattern of dajjidewari of deodar wooden planks 25mm thick 100 mm wide faed with wall by way of drilling of screws/nails and finishing of the wooden planks by way of sand papering machine grading, priming with two or more coats including a coat of fevicol and wood filler where necessary including painting two or more coats of wood paint of approved shade and a coat of black japan on the inner side. complete job |
| 31 | Supply Transportation and installation ornamental garden/park bench (3-seater type) made of decorative cast iron/mild steel frame with armrests and legs, fitted with seasoned hardwood/FRP Slats (25-32mm thick) for seating and backrest, finished with two coats of weatherproof paint/polish over anti-rusting primer, including all stainless-steel fasteners, fixing in position by gruting legs in cement concrete Block (1:2:4) mix of size 200x20x300 mm complete in all respects including labour, material transport and taxes, as per the direction of engineer in charge |
| 32 | Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand and manufacture. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender