Tender For Repairing And Renovation Of Temporary Office Building,Including Earth Filling,Laying Of Paver Blocks,Flooring,Painting,Steel Work, And Roofing At Benibad Gd Site
Tender Value
7.31 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
7 days left
EMD
14630
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Renovation Of Temporary Office Building,Including Earth Filling,Laying Of Paver Blocks,Flooring,Painting,Steel Work, And Roofing At Benibad Gd Site
BOQ
| Sl. No. | Item Description |
| 1 | Renovation of benibad |
| 2 | Dismantling doors,windows and clerestory windows(steel or wood) shutter including chowkhats,architrave,holdfasts etc. complete andstacking within 50 meter lead: of area 3 sq. meters and below |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.In cement mortar |
| 4 | Dismantling roofing including ridges,hips,valleys and gutters etc. and stacking the material within 50 meters lead of Asbestoes Cement Sheet |
| 5 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 6 | Half Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement Mortar 1:4(1 cement: 4 coarse sand) |
| 7 | Excavating, supplying, stacking and filling of local earth (ncluding royalty) by mechanical transport upto a lead of 5km also including ramming and watering of earth in layers not exceeding 20cm in foundation trenches,plinths,sides of foundation etc.complete for all lift. |
| 8 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M-30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per thedirection of Enginner-in-charge. |
| 9 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement Mortar 1:4 (1 cement:4 coarse sand) |
| 10 | Steel work in built up tubular( Round,Square or Rectangular Hollow Tubes etc.) trusses etc.,including cutting ,hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washer etc. complete. Hot Finished welded type tubes. |
| 11 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks,bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete(up to any pitch in horizontal/vertical or curved surfaces),excluding the cost of purlins ,rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m^2) |
| 12 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks ,bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 350 gm/m^2) |
| 13 | \ Providing and fixing tiled false ceiling of specified materials of size 595*595 mm in true horizontal level, suspended on inter locking metal grid of hot dripped galvanized steel sections(galvanized @120 grams/sqm,both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24*38 mm made from 0.30 mm thick (minimum) sheet,spaced at 1200 mm centre to centre and cross and cross T of size 24*25 mm made of 0.30 mm thick(minimum) sheet,1200 mm long spaced between main T at 600 mm centre to centre to form a grid of 1200*600 mm and secondary cross T of length 600 mm and size 24*25 mm made of 0.30 mm thick(minimum) sheet to be interlocked at middle of 1200*600 mm panel to form grids of 600*600 mm and wall angle of size 24*24*0.3mm and laying false ceiling tiles of approved texture in grid including , required cutting/making, opening for services like diffusers,grills,light fittings,fixtures ,smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27*37*1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners,4 mm GI adjustable rods with galvanised butterfly level clips of size 85*30).8 mm spaced at 1200 mm centre to centre along main T , bottom exposed width of 24 mm of all T - sections shall be pre-painted with polyester paint,all complete for all heights as per specifications,drawings and as directed by Engineer-in-Charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595*595 mm , made of Gypsum plasterboard,manufactured from natural gypsum as per IS2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 14 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make,in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand),jointing with grey cement [email protected] kg/sqm including grouting the joints with white cement and matching pigments etc.,complete. Size of Tile 600*600 mm |
| 15 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 16 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 18 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 19 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour 13.82.2 Two coats |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender