Supply Of Supply Installation Testing And commissioning of 125KVA at 0.8 pf 415V 50 Hz 3 phase CPCB IV+ DG Set complete with 1500 RPM DieselEngine of suitable BHP & AC Brush less Alternator mounted on a common base Frame & coupled through a flexible

Sharing tender

Supply Of supply installation testing and commissioning of 125kva at 0.8 pf 415v 50 hz 3 phase cpcb iv+ dg set complete with 1500 rpm dieselengine of suitable bhp & ac brush less alternator mounted on a common base frame & coupled through a flexible coupling or close coupled. , supply installation testing and commissioning of 125kva at 0.8 pf 415v 50 hz 3 phase cpcb iv+ dg set complete with 1500 rpm diesel engine of suitable bhp & ac brush less alternator mounted on a common base frame & coupled through a flexible coupling or close coupled. alternator 1. 1500 rpm, 1p or 3p, brushless type, screen protected , revolving field, self-excited alternator conforming to is/iec 60034-1 ip23, with standard alternator protection (over volt age, over speed & under voltage) 2. a reliable long life with superior class h insulation with temperature rise to class h diesel engine: engine: engine should comprise of silencer, electronic governor from >25 kva & above, suitable rating battery , battery charging alternator, battery charger , inbuilt fuel tank with fuel pipe, avm pads , control panel with 3p mccb of suitable rating with short circuit protections (25ka,36ka, 50ka) with microprocessor based controller indicating genset parameters ( i.e. volt, amps, kwh, kvar, hrs etc.), the diesel engine shall be capable of providing 10% overload for 1 hr for every 11 hrs of continuous running at full load. the dg set shall be supplied as per oem specifications and s hall be tested at site along with below. 1. crdi engine >25 kva dg set 2. water cooled radiator coupled to engine 3. dr y type air cleaner with service indicator 4. first fill of lube oil, coolant & first fill of diesel 5. electrical starter motor with soft start system 6. battery charging alternator 7. remote monitor system >58.5 kva & above 8. 2 years / 5000 hrs wa rranty from commissioning or 30-month form supply. 9. emission control system - egr & (doc, scr for >75 kva dg set ) 10.10 mtrs exhaust pipe from silencer genset controller: 1. microprocessor based genset monitoring, metering and co ntrol system with full graphics lcd display for easy front panel access. 2. amf relay, manual and remote start / stop mo des for 1-ph & 3-ph gensets 3. backlit and full graphics display with power saving feature 4. engine parameter monitori ng -lube oil pressure, engine coolant temperature, fuel level, battery voltage, engine running hours 5. ac alternator pa rameter monitoring -voltage l-n & l_l, current, kw, kva (phase & total), frequency, kwh, pf 6. genset protection: engi ne: low lube oil pressure, high coolant temperature, battery high/low volts, fail to start, sensor failure, low fuel level, overspeed ac alternator: over/under voltage, over/under, frequency, loss of ac sensing, over frequency, over curren t, kw overload, unbalancing load 7. maintenance notification based on engine run hour & due date 8.communication: usb port, rs485, can 9.30-50 event logs acoustic enclosure: 1. specially designed to meet stringent moef/cpcb iv+ n orms 2. weatherproof, powder coated acoustic enclosure for dg set for sound attenuation fabricated from 1.2 mm / 1.6 mm crca sheet steel (structure) with side wall fabricated from 1.2mm /1.6 mm crca sheet and filled with pu foam/roc kwood for fire retardant acoustic and for better safety 3. designed to operate in extreme climatic conditions in tempera tures ranging from -10 deg to 55 deg without any external aid 4. fabricated base frame with avm pads. 5. noise level is less than 75 db (a) at a distance of 1 mtrs as per latest cpcb norms, complete in all respect. description of stage - 1 ins pection: rites (as 100% of poqty.) ]