Tender For Construction Of Hwc At Kawarigam
Tender Value
46.14 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
5 days left
EMD
92298
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Hwc At Kawarigam
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and refill the trench with excavated material & disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 2 | Supply and laying of Stone soling hand packed broken stones in layers including Consolidation with hand ramming. |
| 3 | Providing and laying in position cement concrete. All works upto plinth level 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) crushed |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Thermo mechanically treated bars incld.all carriages |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-15(1:2:4) grade, with 20mm nominal size of aggregates. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for:Suspended floors, roofs, landings, balconies and access platforms. |
| 10 | Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar.including extra over brick work and including all carriage of materials involved. |
| 11 | Dry random rubble masonry with hard stone in foundation and plinth incld.all carriages Nallah Stones |
| 12 | Providing wood work in frames of door windows clestory windows and other frame wrought framed and fixed in position with hold flat lugs or with dash fastever of required diameter and length (holdfast lugs or dash fastens shall be paid seperately Kiln seasoned and chemically treated hollock wood imported wood. |
| 13 | Providing & fixing 3.0 -4.0 mm thick glass panes (weighing not less than 10 kg/sqm) with all fixtures, beading, all complete |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood (Note: -Butt hinges and necessary screws shall be paid separately). windows 30 -35 mm thick imported wood |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows . Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Kiln seasoned & chemically treated hollock wood 30-35 mm thick Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type imported wood. |
| 16 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. Kiln seasoned and chemically treated . 30-35mm thick imported wood |
| 17 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size). |
| 18 | P/F aluminium sliding door bolts ISI marked anodised (anoidic coating not less than AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws complete job 300x16 mm. |
| 19 | P/F of aluminium handles ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job 125 mm |
| 20 | P/F of aluminium handles ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job 100mm |
| 21 | P/F of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job 150x10 mm |
| 22 | P/F of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job 100x10 mm |
| 23 | P/F of I-hook for window shutter . |
| 24 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work . On wood work/steel work |
| 26 | 12 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand) on walls. |
| 27 | 6 mm thick cement plaster of 1:3 mix ( 1 cement: 6 coarse sand) on ceiling |
| 28 | Providing and applying wall putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 29 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 30 | Providing and fixing of 50 mm dia stainless steel railing of 304 grade of hallow tube 1.6mm thicl jindal/salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape buffing etc.complete and fixing stainless steel balusters upto 900 mm height newel post 1050 not less than 1050 mm ss tubes 3 in one installed horizontally includind cuttng welding grinding to required shape and size by required steel dash fasterners nuts bolts screws etc. |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade. |
| 32 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 33 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge. (18mm thick) |
| 34 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 35 | Providing and fixing Colour coated 0.5mm high rib sheets (size, shape and pitch of corrugation as approved by Engineerin-Charge) 0.50mm+/- 5% total coated thickness (TCT), with EPDM seal or with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces |
| 36 | Providing and fixing of 0.5 mm thick plain profile sheet roofing accessories in ridge valley to(500 to 600 mm) of approved profile of color as approved by engineer with self duty, self tapping screws size(5.5mm x 55 mm) with epoxy seal with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces of same color matching of shade ridge/ valley including carriage |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (Jaquar or Equivalent as per Make List) |
| 38 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste coupling of standard pattern,including suitable Pedestal, PVC connections to basin mixer, painting of fittings and brackets, cutting and making good the walls wherever required. (Jaquar or Equivalent as Per Make List)incl.pedestal White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm |
| 40 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, Rectangular shape 453x357 mm |
| 41 | Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes plain bends, door bends, sockets, rubber ring, jointing, junctions, clean out plug , cowls, reducers, offsets, collar, M.S holder-bat clamps, access pieces, floor traps i/c steel grating, trap of self cleansing design .etc. complete including jointing. |
| 42 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.25 mm OD |
| 43 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. 32MM OD |
| 44 | Providing and fixing ball valve (brass) of approved quality of 25mm nominal bore |
| 45 | Providing and fixing PPR Unions25/32 MM |
| 46 | 19.40 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 47 | Providing and fixing C.P. brass angle valve for basin mixer and geyser/cistern points. (Jaquar or Equivalent as Per Make List), 15mm nominal bore |
| 48 | Providing and fixing C.P. brass Wall Mixer/ Basin mixer (Jaquar or Equivalent as Per Make List, (Jaquar or Equivalent as Per Make List) |
| 49 | Constructing brick masonry chamber/manhole with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame & hinges (light duty) 455x610 mm internal dimensions i/c padlock arrangement, fixed in 1:1.5:3 mix,, inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete incld manhole cover etc. complete as per standard design : |
| 50 | Providing and fixing of geysers of approved make and brand (jaquar, Racold, AO Smith, venus) incl all fixtures compete job |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes / ball cock, complete job 1 Nos with 2000 litre capacity each |
| 52 | Providing and fixing uplasticized PVC connection pipe with brass unions of 45cm-60cm long |
| 53 | Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floor traps and floor drains with cement mortar, complete in all respects -100mm dia |
| 54 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 55 | Providing & Fixing 600x20 mm C.P towel rail with C.P brackets fixed to wooden cleats with C.P screws etc. including cutting and making good the walls wherever required . Make : Jaquar or Equivalent, sample to be approved by Engineer in charge |
| 56 | Providing and fixing C.P. Soap Dish/ tray of approved make including screws complete Make : Jaquar or Equivalent, sample to be approved by Engineer in charge |
| 57 | Providing & Fixing of health faucet with shower and flexible connection 1.20mtr long of approved brand complete. Make: Jaguar or Equivalent Sample to be approved by the Engineer-in-Charge. |
| 58 | Providing and fixing P.V.C floor trap 100mm dia including cost of cutting and making good the walls and floors wherever required. |
| 59 | Providing and fixing of the following PVC fittings. (Prince/Finolex/Jindal make) |
| 60 | Providing and fixing in position collipsable steel shutters with vertical channnels 20x10x2mm and braced with flat iron digonals 20x5mm in size with top and bottom rail of T-iron 40x40x6 mm with 40mm dia steel pulleys complete with bolts nuts locking arrangement stoppers handles including applying a priming coat of approved steel primer |
| 61 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
| 62 | Providing. and fixing of foundation stone with pedestal and lnauguration stone with necessary writtings ind curtains with curtain rods and other necessary andllary items required at site as directed by engineer lncharge at site(foundation and inaugratlon comprises of two jobs) |
| 63 | 40mm + 20mm nominal size aggregates from mirbazar for an average lead of 15KMs. |
| 64 | Sand from source for an average lead of 15 Kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender