Tender For Quatationmte For Non Ssr Items Required Tor Interior Works Near The Garden Gate Ofthe New Mantralaya Building
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Sep 2026
7 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Quatationmte For Non Ssr Items Required Tor Interior Works Near The Garden Gate Ofthe New Mantralaya Building
BOQ
| Sl. No. | Item Description |
| 1 | Providing approved crystalline waterproofing compound for Pile Caps,Tie Beams,Grade Slab ,Pedestal,Pardi at the recommended optimum dose of 1% by weight of Cement Cement as directed by Engineer-in charge and allowed to cure. |
| 2 | Providing, supplying, installing, testing and completing 2-hour fire-rated drywall partition syste, comprising 72 mm GI wall tracks (0.7 BMT), 72 mm GI deflection head tracks (0.7 BMT), 70 mm GI C-studs (0.7 BMT) at 610 mm c/c, 0.5 BMT nogging tracks, wafer head screws, HLC anchors, 25 mm drywall screws, 50 mm drywall screws, fibre joint tape, jointing compound, and 50 mm thick rockwool insulation of minimum 48 kg/m³ density, complete with double-layer fire-rated gypsum boards on both sides to achieve an overall partition thickness of approximately 150 mm and a minimum fire resistance rating of 120 minutes, conforming to approved drawings and manufacturer's recommendations.The partition shall include 3 mm Metal composite panel boards fixed on both sides over the fire-rated gypsum board system, complete with HDF Board, plywood screws, adhesive for laminate fixing, patti/trims, edge finishing, joint treatment, alignment, cutting, routing, and application of approved decorative finishes of ACP sheets complete as per approved drawings, specifications and directions of the Engineer-in-Charge. |
| 3 | Providing and Fixing Decorative marble finish tiles 1200mm X 1800mm of About 10mm thk having water absorption less than the 0.05% of approved makes shade and pattern from flooring /dado in required position fixed with 3-4mm thick waiber, white adhesive on plastered surface , making 2mm thick spacer, which is grout with Epoxy grout, etc. Complete |
| 4 | Providing, supplying, installing, testing and commissioning of HDPE Drainage Piping System in lieu of the CPVC piping specified in the contract drawings/BOQ, for Soil Pipes (SP), Waste Pipes (WP), Vent Pipes (VP), NT Pipes and PT Pipes, including HDPE pipes, fittings, bends, branches, reducers, sockets, expansion sockets, cleaning eyes, floor drains, traps, connectors, electrofusion/butt fusion welding, clamps, supports, brackets, sleeves, cutting, jointing, testing, commissioning and all accessories complete as per approved shop drawings, manufacturer's specifications and Engineer-in-Charge's instructions. |
| 5 | Providing, supplying, erecting, testing and commissioning factory-manufactured sectional GRP/SMC Panel Overhead Water Storage Tank, complete with GRP/SMC panels, hot-dip galvanized (HDG) mild steel internal and external reinforcement members, base support frame, SS fasteners, EPDM rubber gaskets, internal tie rods, access ladder, manhole, inlet, outlet, overflow, scour, vent connections, level indicator provision, all fittings, accessories, assembly, hydraulic testing, commissioning and all incidental works complete as per approved drawings, Consultant's technical requirements, manufacturer's specifications and Engineer-in-Charge's instructions. |
| 6 | Providing, fabricating, supplying and installing Aluminium Stile Door comprising powder-coated/anodized aluminium frame and shutter fabricated from approved aluminium sections, fitted with 10 mm thick clear toughened glass, complete with Geza/Hefele or equivalent make SS finish hardware including exposed door closer, 35 mm backset dead lock with 70 mm cylinder (one side key and one side knob), 450 mm offset pull handle, automatic drop-down seal, door stopper, glazing gaskets, EPDM rubber, sealant, fasteners and all accessories, including cutting, fitting, fixing, alignment, testing and commissioning, complete in all respects as per approved shop drawings and Engineer-in-Charge's instructions. |
| 7 | Providing, fabricating and fixing floor closure and smoke seal system between PEB Fascia Beam and façade Panel, comprising 1.2 mm thick G.I. sheet flashing/closure panels of required profile and dimensions, 120 mm thick Siderise stone wool smoke/fire barrier of nominal density 75 kg/m³, including necessary GI sheet supports, fixing accessories, weather-grade silicone sealant and smoke sealant, cutting, bending, fabrication, installation, sealing of joints and gaps, and all necessary materials, labour, tools and tackles, complete as per approved shop drawings, manufacturer's recommendations and directions of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender