Tender For Restoration & Preservation Of Baba Biram Shah Jhangar, Shrine
Tender Value
1.74 Crore
Estimated cost
Bid Submission
16 Sep 2026
0 days left
EMD
3.49 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration & Preservation Of Baba Biram Shah Jhangar, Shrine
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Sep-2026 | extension of dates | Date | 16-Sep-2026 |
| 2 | 07-Sep-2026 | extension of date | Date | 12-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metre All kinds of soil 80% and 20% Ordinary rock |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) Nallah |
| 7 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete with Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) |
| 8 | Providing and laying in position lime concrete with graded stone/brick aggregate 40 mm nominal size and 40% mortar comprising of 1:1:1 (1 lime putty: 1surkhi: 1fine sand) including curing complete but excluding cost of centering andshuttering. All works upto plinth level with: Graded Stone Aggregate |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Centring and Shuttering including strutting, propping etc and removal of form work for Foundations: footings, bases of columns etc. for mass concrete. |
| 15 | Centring and Shuttering including strutting, propping etc and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 16 | Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform. |
| 17 | Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams, plinth beams, girders, bressumers and centilevers. |
| 18 | Centring and Shuttering including strutting, propping etc and removal of form work for Arches, domes, vaults upto 6 m span |
| 19 | Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls (Under 20 cms wide) |
| 20 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 21 | Extra for brick work with common burnt clay bricks /cement concrete bricks in superstructure above plinth level upto floor five level |
| 22 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 23 | Extra for half Brick masonry in superstructure above plinth level upto floor V level.. |
| 24 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 25 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 26 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanized with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bimetallic contacts all complete required to perform as per specification and drawing The item includes cost of all material &labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 27 | 6mm cement plaster to ceiling of mix 1:3 ( 1 cement: 3 fine sand). |
| 28 | 12mm cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 29 | 15 mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 30 | 12 mm cement plaster of mix 1:6 ( 1 cement : 6 coarse sand) |
| 31 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand). |
| 32 | Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 Coarse sand) including pointing in white cement mortar 1:2 (1 cement : 2 Stone dust) with an admixture of pigment matching the stone shade, Jali slab without any chamfers etc and curing complete.Red sand stone |
| 33 | Providing and fixing Red sand stone jali railing pillar having size 75x75x900mm fixed with stone brackets and apply a high-quality stone adhesive between the blocks or between the jali and the pillar and fill any gaps between the jali and the pillar with cement grout or silicone sealant to prevent water seepage and enhance stability all complete job as per the direction of Engineer incharge. |
| 34 | Providing and fixing hope (Rassa) in red stone ornamental pillar top in all complete job as per the direction of Engineer incharge. |
| 35 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately):Red Sand Stone - Exposed face machine cut and table rubbed with rough backing 40mm thick |
| 36 | Providing and fixing cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement: 2 coarse sand) including making the necessary chases in stone and holes in Gunmetal Cramps 25 x 6 mm - 30 cm long |
| 37 | Stone work plain ashlar in super structure upto floor five level in cement mortar 1:3 ( 1 cement :3 coarse sand) including centering, shuttering and pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete:In Arches Both faces dressed Red sand stone |
| 38 | Stone work plain ashlar in super structure upto floor five level in cement mortar 1:3 ( 1 cement :3 coarse sand) including centering, shuttering and pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete:In Dome Both faces dressed Red sand stone |
| 39 | Providing and fixing red sand stone brackets 55 x 22.5 x 45 cm sunk and moulded including providing and fixing with 4 No’s, gun metal cramps 25 x 6mm 30cm long and dowel bars 7.5cm long 6mm dia as per design. |
| 40 | Stone work, plain in copings, cornices, string courses and plinth courses, upto 75mm thick, in cement mortar 1:6 (1 cement : 6 Coarse sand) including pointing with white cement mortar 1:2 (1 cement : 2 Stone dust) with an admixture of pigment matching the stone shade& curing complete. Red sand stone |
| 41 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade |
| 42 | Pointing on stone work with lime surki mortar 1 : 3 mix Raised and cut Pointing |
| 43 | 100mm thick cobble stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), including pointing with cement mortar 1:2 (1 cement:2 stone dust) with curing complete Cobble stone |
| 44 | Providing and fixing Ornamental heritage type stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 45 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 46 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 47 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 48 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown . |
| 49 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete . |
| 50 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work. |
| 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 52 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 53 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.25mm nominal outer dia pipes. |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 20mm nominal outer dia pipes. |
| 56 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Single socketed pipes |
| 57 | 75mm dia |
| 58 | 110mm dia |
| 59 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Single tee without door |
| 60 | 75mmx75mmx75mm dia |
| 61 | 110mmx110mmx110mm |
| 62 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Bend 87.5 degree |
| 63 | 75mm dia |
| 64 | 110mm dia |
| 65 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 66 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 67 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 68 | Providing and fixing uplasticized PVC connection pipe with brass unions 30 cm length 15 mm nominal bore |
| 69 | Providing & fixing C.P brass bib cock of approved quality conforming to IS:8931.(15mm nominal bore) |
| 70 | Providing & fixing C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931 (15mm nominal bore) |
| 71 | Proving and laying in position flow trap including all fittings , complete job. |
| 72 | Providing and fixing CP grading of 100 mm dia of approved brand. |
| 73 | Providing and fixing CP soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 74 | Providing and fixing CPVC ball valve of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 75 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia |
| 76 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 77 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design |
| 78 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. complete job as per direction of engineer-in-charge |
| 79 | Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with 1:1:1(1 Lime putty: 1 Surkhi: 1 Fine sand) |
| 80 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete withLime Mortar 1:1:1(1 Lime putty: 1 Surkhi: 1 Fine sand) . |
| 81 | Manufacturing Supplying And Fixing stainless steel over head Signage boards made up of 2mm thick Stainless steel sheet as approved by Engineer-in-charge, letters borders etc , as per IRC :67-2001 and fixing the same to the plate of structural frame work of stainless steel by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mmc/c all malong the periphery as well as in two vertical rows along with theft resistant measures. the rate includes the cost of rounding off the corners lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing specification and direction of Engineer-in-charge (Structural frame work including S.S plate to be provided seperately Rectangular area of the sheet only shall be measured for payment). |
| 82 | Engraving letters over Stainless steel plate with laser technology including all geometrical features with logos complete job as per the sample to be provided by the Engineer-in-charge (Engraving to be done in English/Hindi & Urdu) |
| 83 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Sand lead up to 108 kms avg. |
| 84 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Stone aggregrate lead up to 48 kms avg. |
| 85 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Bricks for an avg. lead of 123 kms distance |
| 86 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Lime lead up to 130 kms avg. |
| 87 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Surkhi lead up to 130 kms avg. |
| 88 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Stone lead up to 48 kms avg. |
| 89 | Providing electric point with condiduct, wiring angle switch pannel board |
| 90 | Providing Ornamental light LED 10 watt with 2'-0\\" post 2'' dia |
| 91 | Providing Ornamental Spot light LED 25 watt of different colours |
| 92 | Providing & fixing Pannel Board and Supply Line |
| 93 | Providing & fixing of cost iron heritage type decorative pole (dual aram) 6 meter high at required Spot. Including LED ornamental light with wiring (underground Cable and controlling panel). Including earth work and providing M-15 grade concrete pedestral upto 0.9 m deep and 0.45 m above. |
| 94 | Providing & fixing of Traditional outdoor wall /garden light.Cast Aluminium Unbreakable Acrylic Exterior water proofing for lamp |
| 95 | Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required (Group-C) |
| 96 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group-A) |
| 97 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 98 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 99 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required. 1 x 1.5 sq. mm |
| 100 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm |
| 101 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 102 | 5/6 A switch |
| 103 | 3 pin 5/6 A socket outlet |
| 104 | 15/16 A switch |
| 105 | 6 pin 15/16 A socket outlet |
| 106 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 107 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 108 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door |
| 109 | Supplying and fixing of 20 watt LED 4 feet long tube light batten type |
| 110 | Supplying and fixing of following electrical items with complete connection as required. |
| 111 | Fan Box/Fan Hook |
| 112 | Deep Box |
| 113 | Fan sheet |
| 114 | Round sheet |
| 115 | Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required. |
| 116 | Ceiling fan 1200 mm sweep alongwith rod upto 1'-6\\" long |
| 117 | Exhaust fan 300 mm size (metalic) heavy duty (Crompton Trans air or Equivalent) |
| 118 | Supply and fixing of single phase of following rating self pumping priming for pumping water including connections etc as required.1 HP |
| 119 | Supplying and fixing stainless stell benches of SS 304 Grade with three seater with Armed grilled in laser cutting logo through CMC cutting machine design logo in front side of bench approved by engineer in Charge. The bench shall be firmly fixed with cement concrete 1:3:6 mix platform incl all carriges complete. Min. weight 30 kg |
| 120 | Supplying and fixxing Hut type double pole hanging dustbins of size 380mm dia,1070mm and 0.60mm th. Having capacity of 70 litres min of grade SS 304 and making sticker of dry and wet waste (Vertical pipe 58 mm dia,1500 mm high SS- 304 min wt. = 40 kg, Sand height 1300 = 5mm SS- 304, Canopy of size 380 x 1070 mm SS-304, Base plate of size 150 mm x 150 mm x 3mm th. Embeded in cement con. 1:3:6 mix, Hut sheet 580 x 1150 mm) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Today
Sep 12, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender