Tender For Provn Of Parking Shed For Cat A Mt Vehicle Near New Building At 57 Asp At Af Stn Vadodara
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
19 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Parking Shed For Cat A Mt Vehicle Near New Building At 57 Asp At Af Stn Vadodara
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 CuM, getting out in hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) in any kind of soil means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 150 m and lift upto 1.5m, as directed by Engineer-incharge |
| 4 | Returning , filling in, incl spreading leveling, watering and well ramming in layers n.exc 25cm in soil complete all as specified and directed by engr-in charge. (Earth obtained from item No 03 will be used for Refilling) |
| 5 | M&L for plain cement concrete type C2 1:3:6 ( 40 mm graded aggregate) as in foundation, filling and mass concrete |
| 6 | M&L for Hard core with broken stone of gauge n.exc. 63mm deposited spread and levelled in layers n.exc.15cm thick complete all as specified. |
| 7 | M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base for laying of floor finishes, all as specified and directed. |
| 8 | Material & labour for 100 mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in floor finishes, finished surface even and rough with brooming complete all as specified and directed. |
| 9 | Material and labour for Glass dividing strips, 3 mm thick 38 mm wide inserted into position while laying floor finishes complete all as specified and directed. |
| 10 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing debris off the premises and render the area clean complete all as specified and directed. |
| 11 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified. |
| 12 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10cm wide complete all as specified |
| 13 | M&L for reinforced cement concrete type B1, 1:2:4 (using 20mm graded stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified. |
| 14 | M&L for 10mm dia and over , TMT bars, cut to length, bend to shape required including cranking bending spirally for hoping for columns hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to deformed or twisted bars complete all as specified. |
| 15 | -ditto-but 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders complete all as specified and directed |
| 16 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde- E- 250) quality- A. Complete all as specified and as directed |
| 17 | M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A. Complete all as specified and as directed |
| 18 | M&L for preparation of new surfaces of steel or iron over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zincl chrome primer Complete all as specified and as directed |
| 19 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 20 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 21 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and removing from site under schedule of credit complete all as specified and directed |
| 22 | Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender